GOST R 8.596-2002
ГОСТ Р 8.596-2002
|
|
State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
Государственная система обеспечения единства измерений. Метрологическое обеспечение измерительных систем. Основные положения
Status: Valid - Supersedes
The standard establishes the basic provisions for the metrological assurance of measuring systems at the stages of their life cycle: development (design), production (production, installation and commissioning at the operation site), operation. The standard applies to ICs: - manufactured by the manufacturer as complete, completed (with the exception of, in some cases, communication lines and electronic computers) products for installation at the place of operation are sufficient indications given in the operating documentation, in which the metrological characteristics of the measuring channels of the system are normalized ; - designed for specific objects (group of typical objects) of the components of IP, produced, as a rule, by various manufacturers, and accepted as finished products directly at the object of operation. Installation of such ICs at the place of operation is carried out in accordance with the design documentation for the IC and operational documentation for its components, in which the metrological characteristics, respectively, of the measuring channels of the IC and its components are normalized.
Стандарт устанавливает основные положения по метрологическому обеспечению измерительных систем на этапах их жизненного цикла: разработка (проектирование), производство (изготовление, монтаж и наладка на объекте эксплуатации), эксплуатация. Стандарт распространяется на ИС: - выпускаемые изготовителем как законченные укомплектованные (за исключением, в ряде случаев, линий связи и электронных вычислительных машин) изделия, для установки которых на месте эксплуатации достаточно указаний, приведенных в эксплуатационной документации, в которой нормированы метрологические характеристики измерительных каналов системы; - проектируемые для конкретных объектов (группы типовых объектов) из компонентов ИС, выпускаемых, как правило, различными изготовителями, и принимаемые как законченные изделия непосредственно на объекте эксплуатации. Установку таких ИС на месте эксплуатации осуществляют в соответствии с проектной документацией на ИС и эксплуатационной документацией на ее компоненты, в которой нормированы метрологические характеристики, соответственно, измерительных каналов ИС и ее компонентов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
9/30/2002
SKU: RUSS18555
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State system for ensuring the uniformity of measurements (GSI) »
As a Replacement Of:
MI 2438-97: State system for ensuring uniform measurement. Measuring systems. Metrological assurance. Basic provisions.
The Document References:
GOST 27300-87: Information measuring systems. General requirements, complete set and rules of operation documentation composition
GOST 34.201-89: Information technology. Set of standards for automated systems. Types, sets and indication of documents for automated systems making
GOST 34.601-90: Information technology. Set of standards for automated systems. Automated systems. Stages of development
GOST 34.602-89: Information technology. Set of standards for automated systems. Technical directions for automated system making
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
GOST 8.256-77: State system for ensuring the uniformity of measurements. Standardization and determination of dynamic characteristics of analogue measuring instruments. Basic principles
GOST R 51841-2001: Programmable controllers. General technical requirements and test methods
GOST R IEC 870-5-1-95: Telecontrol equipment and systems. Part 5. Transmission protocols. Section 1. Transmission frame formats
MI 1552-86: State system for ensuring uniformity of measurements. Single straight measurements. Evaluation of measurement errors
MI 2083-90: Indirect measurements. Determination of the measurement results and the estimation of their errors
MI 2146-98: National Measurement Standards. Procedure for Development and Requirements for Content of Programs for Testing Means of Measurement for Approval of their Type
MI 2168-91: State system for ensuring uniformity of measurements. Measuring information systems. The method of calculating the metrological characteristics of the measuring channels according to the metrological characteristics of the linear analogs of the components
MI 222-80: Calculation procedure for metrological characteristics of measuring channels of information and measurement systems based on metrological characteristics of their components
MI 2232-2000: State system for ensuring the uniformity of measurements. Ensuring the effect of measurements by the control of technological processes. Estimation of the measuring error when the limited point of information
MI 2267-2000: State system for ensuring the uniformity of measurements. Ensuring the effect of measurements by the control of technological processes. Metrological examination of technical documents
MI 2277-93: State system for ensuring uniformity of measurements. System of certification of measuring instruments. The main provisions and order of work
MI 2278-93: State system for ensuring uniformity of measurements. Certification of measuring instruments. Certification bodies. Accreditation procedure
MI 2279-93: State system for ensuring uniformity of measurements. Certification of measuring instruments. The procedure for maintaining the system registry
MI 2304-94: Metrological Monitoring and Supervision by Metrological Services of Juridical Persons
MI 2438-97: State system for ensuring uniform measurement. Measuring systems. Metrological assurance. Basic provisions.
MI 2439-97: National system for measurements unification. The measuring system metrological characteristics. Notation. The principles of regulation, definition and control.
MI 2440-97: The State Measurements System. Methods of experimental determination and control characteristics of the error of measurement channels for measuring systems and measurement systems.
MI 2441-97: Tests for the approval of the measuring systems types. General requirements. Guidelines
MI 2526-99: State system for ensuring uniformity of measurements. Regulatory documents on methods of calibration of measuring instruments. Main provisions
MI 2539-99: GSE. Measuring channels of controllers, measuring and computing, control, software and hardware systems. General requirements for methods of verification
PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
PR 50.2.010-94: National Measurement Standards. Requirements for Government Centers for Testing Means of Measurement and Procedure for Their Accreditation
PR 50.2.012-94: GSOEI. The procedure for certification of measuring instruments
PR 50.2.013-97: GSOEI. The procedure for accreditation of the metrological services of legal entities to the right of certification of measurement procedures and metrological examination of documents
PR 50.2.014-96: Metrological Regulations. National System for Standardization of Measurements. Accreditation of Metrological Services of Juridical Persons for Verification of Measuring Devices
PR 50.2.016-94: National Measurement Standards. Requirements for Calibration Procedures
PR 50.2.018-95: State system for ensuring uniformity of measurements. The accreditation procedure of the metrological services of legal entities for the right to conduct calibration work
RD 50-453-84: Procedural Guidelines for Error Characteristics of Measuring Devices Under Actual Operating Conditions. Calculation Methods
The Document is Referenced By:
FR 1.29.2009.06689: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement procedure in vertical tanks
GOST 22.2.04-2012: State system for ensuring the uniformity of measurements. Management and procedure of internal metrological surveillance of the enterprises with hazardous industrial objects
GOST 32019-2012: Technical condition monitoring of the unique buildings and constructions. Rules of design and installation of permanent systems (stations) of monitoring
GOST 33435-2015: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST 33477-2015: System of development and launching into manufacture. Railway infrastructure equipment. Procedure of development, launching into manufacture and tolerance for use
GOST 8.632-2013: State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles
GOST R 113.06.01-2023: Best available technologies. Automated emission control systems in the production of cement. General requirements for the organization of automatic control and the selection of measuring sections and measurement locations
GOST R 113.37.01-2019: The best technology available. Systems for automatic control and accounting of discharges of pollutants in the coal industry into water bodies. Primary requirements
GOST R 50.05.03-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination and thickness measurement of monometal, bimetal, and corrosion-resistant cladding
GOST R 50.05.04-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of austenitic steel welded joints
GOST R 50.05.13-2019: Conformity assessment system in the field of atomic energy use. Ultrasonic inspection of welded joints using phased array technology. Order of conduct
GOST R 50.05.16-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unbrakable control. Metrological support
GOST R 51143-2018: Starting complexes and integration site and filling-neutralization station for rocket of space using. The requirements to tests
GOST R 53375-2009: Oil and gas wells. Geological-technological logging. General requirements
GOST R 53375-2016: Oil and gas wells. Geological-technological logging. General requirements
GOST R 53609-2009: Global navigation satellite systems. Methods and technologies of execution geodesy and cadastral works executing. Evaluation of work capacity of two-frequencies geodetic apparatus by measuring of code and phase pseudo-ranges
GOST R 54798-2011: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST R 54982-2012: Gas distribution systems. Objects of liquid petroleum gases. General requirements for operation. Operational documentation
GOST R 54982-2022: Gas distribution systems. Facilities for liquefied hydrocarbon gases. General requirements for operation
GOST R 54983-2012: Gas distribution systems. Natural gas distribution networks. General requirements for operation. Operational documentation
GOST R 55050-2012: Railway rolling stock. Permissible exposure norms to the railway track and test methods.
GOST R 55260.1.4-2012: Hydro power plants. Part 1-4. Hydraulic engineering constructions of hydroelectric power stations. The general requirements to the organization and realization of monitoring
GOST R 55369-2012: Railway automatics and telemechanics equipment. General technical requirements
GOST R 55435-2013: Oil and oil products trunk pipeline transportation. Operation and maintenance. General principles
GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
GOST R 55996-2014: Space systems. Requirements to the content and format of statement of work clauses for the development of science and social-economic function space technique
GOST R 56066-2014: Safety of amusement rides. Methods of measuring the acceleration acting on the passenger rides
GOST R 56942-2016: Automated measuring system of accountancy and control of thermal energy. General specifications
GOST R 57793-2017: United power system and isolated power systems. Hydraulic and pumped storage power stations. Hydraulic engineering structures. Monitoring and assessment of technical condition during operation. Main provisions
GOST R 58604-2019: Unified energy system and isolated energy systems. Thermal power plants. Automated process control systems. Terms of creation. Norms and Requirements
GOST R 58652-2019: Mining equipment. Multifunctional coal mine safety systems. Industrial Safety Principles
GOST R 58719-2019: Unified energy system and isolated energy systems. Hydraulic power plants. Waterworks. Control and measuring systems and equipment. Terms of creation. Norms and requirements
GOST R 58786-2019: Electrical equipment for nuclear power plants. General technical requirements
GOST R 58787-2019: Electric generating sets with internal combustion engines for nuclear power plants. General technical conditions. Accommodation
GOST R 58926-2020: The system for ensuring the uniformity of measurements at the enterprises of the aviation industry. Basic Provisions
GOST R 58928-2020: The system for ensuring the uniformity of measurements at the enterprises of the aviation industry. The order of work on the metrological support of test equipment
GOST R 58930-2020: A system for ensuring the uniformity of measurements at enterprises of the aviation industry. Metrological support of automated control devices
GOST R 70384-2022: Automation of energy accounting and management. Heat energy metering devices and metering systems based on them. Lifecycle management and metering processes
GOST R 70518-2022: Automated systems of nuclear facilities. Metrological Support. General provisions.
GOST R 70937-2023: Intelligent systems of automatic monitoring and diagnostics of freight cars. General technical requirements
GOST R 71513-2024: Systems of automatic control of emissions and discharges. Systems of automatic control of emissions. Basic requirements for design and working documentation
GOST R 71520-2024: Systems of automatic control of emissions and discharges. Systems of automatic control of discharges. Basic requirements for design and working documentation
GOST R 8.565-2014: State system for ensuring the uniformity of measurements. Metrological ensuring of atomic power stations. General principles
GOST R 8.632-2013: State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Basic principles
GOST R 8.642-2008: State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles
GOST R 8.654-2009: State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.654-2015: State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.733-2011: State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements
GOST R 8.734-2011: State system for ensuring the uniformity of measurements. Intelligent sensors and intelligent measuring systems. Methods of metrological self-checking
GOST R 8.778-2011: State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
GOST R 8.818-2013: State system for ensuring the uniformity of measurements. Virtual measuring instruments and virtual measuring systems. General principles
GOST R 8.883-2015: State system for ensuring the uniformity of measurements. Software of measuring instruments. Algorithms of processing, storage, protection and transmission of measuring information. Test methods
GOST R 8.913-2016: State system for ensuring the uniformity of measurements. Satellite laser ranging systems. Accuracy and measurement uncertainty. Standardized metrological characteristics
GOST R 8.960-2019: State system for ensuring uniformity of measurements. The best technology available. Metrological support of automatic measuring systems for the control of harmful industrial emissions. Key Points
ITS 22.1-2016: General principles of industrial environmental control and its metrological support
MI 2773-2002: Procedure for metrological and technical support for start-up of oil quantity and attributes measurement systems
MI 2807-2003: Recommendation. GSE. The amount of electrical energy. Method of unbalance distribution using measurement uncertainty in mutual settlements in the wholesale electricity market
MI 2808-2003: Recommendation. State system for ensuring uniformity of measurements. The amount of electrical energy. Measurement technique for the distribution of unbalances in the wholesale electricity market
MI 2825-2003: Oil quantity and quality ratio measurement system. Metrological and technical design requirements
MI 2846-2003: State system for ensuring uniformity of measurements. The amount of electrical energy and power. The method of measurement in the branches of OJSC Tyumenenergo
MI 2891-2004: Recommendation. GSOEI. General requirements for measurement software
MI 2893-2004: Recommendation. State system for ensuring uniformity of measurements. Systems for measuring the quantity and quality of oil. Type approval tests. General provisions and organization of work in the system of the main pipeline transport of JSC AK Transneft
MI 2955-2005: GSE. Typical methods of certification of software measuring devices and the order of its implementation
MI 2955-2010: Recommendation. State system for ensuring uniformity of measurements. Typical methods of certification of software measuring devices
MI 2999-2006: Recommendation. GSOEI. Systems automated information-measuring commercial accounting of electric energy. Recommendations for writing a type description
MI 2999-2011: State system for ensuring uniformity of measurements. Systems automated information-measuring commercial accounting of electric energy. Recommendations for writing a type description
MI 2999-2018: State system for ensuring uniformity of measurements. Systems automated information-measuring commercial accounting of electric energy. Recommendations for writing a type description
MI 3000-2006: GSOEI. Systems automated information-measuring commercial accounting of electric energy. Typical method of verification
MI 3000-2018: Recommendation. State system for ensuring uniformity of measurements. Systems automated information-measuring commercial accounting of electric energy. Method of verification
MI 3046-2007: State system for ensuring uniformity of measurements. Thermal energy and the mass of water received by consumers. The method of measurement using heat meters ICT 9961-P1. Primary requirements
MI 3241-2009: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement technique indirect method of dynamic measurements
MI 3242-2009: State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Methods of measurement in horizontal tanks
MI 3286-2010: Recommendation. Verifying software protection and determining its level when testing measuring instruments for type approval
MI 3566-2016: State system for ensuring uniformity of measurements. Typical test methods and conformity assessment (certification) of measuring instruments software
MP 001-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) Severstal Ropes JSC Volgogradsky Branch. Verification Method
MP 006-2019: System automated information-measuring commercial accounting of electricity (AIIS KUE) MP EMR
MP 135-2019: System automated information-measuring commercial accounting of electricity (AIIS KUE) PJSC "Penzmash". Verification Method
MP 140-2019: Automated information-measuring system for commercial accounting of electric energy (AIIS KUE) of Transneft PJSC in the part of Transneft Vostok LLC at pump station No. 7
MP 201-045-2019: System automated information measuring commercial accounting of electricity (AIIS KUE) UNEG software 220 kV
MP 201-047-2019: System automated information-measuring commercial accounting of electricity (AIIS KUE) UNEG software 220 kV
MP 201-048-2019: System automated information measuring commercial accounting of electricity (AIIS KUE) UNEG software 220 kV
MP 201-049-2019: System automated information-measuring commercial accounting of electricity (AIIS KUE) UNEG software 220 kV
MP 206.1-176-2018: Automated information-measuring system for commercial accounting of electricity (AIIS KUE) of the traction substation "Kirenga" of the East Siberian Railway branch of the Russian Railways OJSC within the boundaries of the Irkutsk Region
MP 206.1-230-2018: System automated information and measuring commercial accounting of electricity (AIIS KUE) of PJSC
MP 26.51.43/17/19: Automated information-measuring system for commercial metering of electricity of LLC "AUCHAN". Verification method
MP 31-2019: The automated information and measurement system for commercial metering of electrical energy (AIIS KUE) of PJSC "Transneft" in the part of JSC "Transneft - Diascan" on the Scientific and Production Base. Verification method
MP 312235-076-2020: System automated information measuring commercial accounting of electricity AIIS KUE UNEG PS 220 kV Megion. Verification Method
MP 312235-077-2020: RUSENERGOSBYT LLC automated information measuring system for commercial accounting of electric energy (AIIS KUE) for energy supply of the branch of BUNGE CIS LLC in Kolodeznoye. Verification Method
MP 32-2019: Automated information and measuring system for commercial accounting of electric energy (AIIS KUE) of JSC Energy Sales Company (LLC Teplo-Wimm, LLC Vegetables of the South from 35 kV Substation Dalnaya). Verification Method
MP JePR-205-2019: System automated information measuring commercial accounting of electricity (AIIS KUE) "Limanskaya SES"
MP JePR-205-2019: System automated information measuring commercial accounting of electricity (AIIS KUE) "Limanskaya SES"
MP JePR-216-2019: Automated information and measuring system for commercial metering of electricity (AIIS KUE) of JSC "NESK" for GTE "Gelendzhik" second stage. Verification method
MP JePR-217-2019: Automated information and measuring system for commercial metering of electricity (AIIS KUE) Construction Innovations LLC, second stage. Verification method
MP JePR-222-2019: Automated information and measuring system for commercial electricity metering (AIIS KUE) of NPP LLC at the facility of LISCo Broiler LLC (GTD No. 5). Verification method
MP JePR-223-2019: Automated information and measuring system for commercial metering of electricity (AIIS KUE) of Stolitsa LLC. Verification method
MP JePR-224-2019: Automated information and measuring system for commercial metering of electricity (AIIS KUE) of CJSC "Nizhnevartovskaya GRES". Verification method
MP JePR-226-2020: Automated information and measuring system for commercial metering of electricity (AIIS KUE) RUSENERGOSBYT SIBERIA LLC. Verification method
MP JePR-227-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) UNEG PP 220kV Amga
MP JePR-227-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) UNEG PP 220kV Amga
MP JePR-230-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) of PJSC "TNS energo Yaroslavl"
MP JePR-230-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) of PJSC "TNS energo Yaroslavl"
MP JePR-232-2020: Automated information-measuring system for commercial accounting of electricity (AIIS KUE) of LLC "MSC Energo" in terms of electricity supply of LLC "Mine Gramoteinsky"
MP JePR-232-2020: Automated information-measuring system for commercial accounting of electricity (AIIS KUE) of LLC "MSC Energo" in terms of electricity supply of LLC "Mine Gramoteinsky"
MP KCSM-177-2019: System automated information measuring commercial accounting of electricity LLC "Terbunsky potter". Verification Method
MP KCSM-186-2019: Channels measuring systems of automated information-measuring commercial metering of electricity AIIS KUE UNEG Substation 330 kV "Gubkin". Verification method
OTT 1.3.3.99.0141-2012: Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
PNST 159-2016: Automatic information and measuring system of commercial accounting of electric energy. General specifications
PNST 161-2016: Mining equipment. Multipurpose safety systems and automated control systems for technological processes in the mine. Requirements for metrological providing and test methods
PNST 16-2014: Mining equipment. Multipurpose safety systems for coal mines. Monitoring system of an aerological condition of excavations. General technical requirements and test methods
PNST 162-2016: Mining equipment. Multipurpose safety systems and automated control systems for technological processes in the mine. General technical requirements
PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements
PNST 165-2016: Electric generating sets for nuclear plants with internal combustion engines. General specifications. Рlacement requirements
PNST 17-2014: Mining equipment. Multipurpose safety systems for coal mines. Systems for observation and notification of an accident. General technical requirements
PNST 18-2014: Mining equipment. Multipurpose safety systems for coal mines. System for searching and localization persons in accident. General technical requirements and test methods
PNST 187-2017: Best available techniques. Automatic systems for continuous control and metering of contaminants emissions from thermal electric power stations into air. General requirements
R 50.2.079-2011: State system for ensuring the uniformity of measurements. Coordinate time-domain measurements. Terms and definitions
R 50.2.090-2013: State system for ensuring the uniformity of measurements. Quantitative chemical analysis procedures. General requirements for development, certification and application
RD 52.18.761-2012: Means of measurements of hydrometeorological purposes network. NGO "Typhoon"
RD EO 0515-2004: Standards of measurement accuracy of the main heat-engineering quantities for nuclear power plants with water-cooled power reactors VVER-1000
RT 02-2008: Organization of verification of measuring instruments and the procedure for developing documents on verification methods
SO 34.35.146-2003: Guidelines for the creation of automated process control systems for water treatment plants (TLU) power plants
SP 256.1325800.2016: Electrical equipment of residential and public buildings. Rules of design and erection
STO 1.1.1.07.001.0675-2017: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
