PB 09-297-99
ПБ 09-297-99
|
|
Rules of setup and safe operation of compressor units with piston compressors operating on dangerously explosive and noxious gases
Правила устройства и безопасной эксплуатации компрессорных установок с поршневыми компрессорами, работающими на взрывоопасных и вредных газах
Status: Not effective - Superseded
The rules apply to stationary piston compressor units with pressures up to 50 MPa, operating on explosive and harmful gases of the 1st and 2nd hazard classes in accordance with GOST 12.1.011-78 “SSBT. Explosive mixtures. Classification and test methods "and according to GOST 12.1.007-76" Harmful substances. Classification and general safety requirements. The rules apply to all designed, newly manufactured and reconstructed compressor installations, as well as all existing piston compressor installations. The rules do not apply to refrigeration and oxygen compressor installations, as well as compressor installations operating on radioactive gases and gases of the acetylene series.
Правила распространяются на стационарные поршневые компрессорные установки с давлением до 50 МПа, работающие на взрывоопасных и вредных газах 1-го и 2-го классов опасности по ГОСТ 12.1.011-78 «ССБТ. Смеси взрывоопасные. Классификация и методы испытаний» и по ГОСТ 12.1.007-76 «Вредные вещества. Классификация и общие требования безопасности». Правила распространяются на все проектируемые, вновь изготавливаемые и реконструируемые компрессорные установки, а также все действующие поршневые компрессорные установки. Правила не распространяются на холодильные и кислородные компрессорные установки, а также компрессорные установки, работающие на радиоактивных газах и газах ацетиленового ряда.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
7/6/1999
SKU: RUSS18556
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
1 General industrial safety requirements for operation of a hazardous production facility »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.230 Explosion protection »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.140 Compressors and pneumatic machines »
The Document is Replaced With:
PB 03-582-03: Design and Safety Operation Regulations for Reciprocating Compressor Operating with Explosive and Hazard Gases
The Document References:
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.011-78: Explosive mixtures. Classification and test methods
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.4.124-83: Occupational safety standards system. Means of static electricity protection. General technical requirements
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 2.601-95: Operational documents
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9544-93: Pipeline cut-off valves
NPB 105-95: Determination of Rooms and Buildings Categories on Explosion and Fire Hazard
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-221-98: Rules of development, manufacture and application of diaphragm safety devices
PB 09-170-97: General rules on explosion safety for explosive- and fire-hazardous chemical, petrochemical plants and oil refineries
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
PR 50.2.016-94: National Measurement Standards. Requirements for Calibration Procedures
RD 09-102-95: Methodological guidelines for determining the residual life of hazardous facilities, supervised by Federal Mining and Industrial Inspectorate of Russia.
RTM 38.001-94: Guidelines for the calculation of strength and vibration of technologically steel pipe.
SNiP 2.02.05-87: Foundations of dynamic load machines
SNiP 3.05.05-84: Processing equipment and process pipelines
VSN: Rules for protection against static electricity in the chemical, petrochemical and refinery industries
The Document is Referenced By:
OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval
PB 08-389-00: Safety Rules for Gas Processing Plants Production
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
SA-03-003-07: Stressing and vibration calculation of steel industrial pipelines.
VRD 39-2.5-082-2003: Rules for the technical operation of gas filling stations for compressor stations
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.