SNiP 3.09.01-85
СНиП 3.09.01-85
|
|
Precast reinforced concrete structure and work-piece production
Производство сборных железобетонных конструкций и изделий
Status: Not effective - Not applicable. Order of the Ministry of Construction of Russia No. 827
The rules and regulations apply to the production of precast concrete and reinforced concrete structures and products from heavy, light, fine-grained, heat-resistant and stress concrete for residential, civil, industrial, agricultural, transport, hydraulic and other types of construction.
Нормы и правила распространяются на производство сборных бетонных и железобетонных конструкций и изделий из тяжелого, легкого, мелкозернистого, жаростойкого и напрягающего бетонов для жилищного, гражданского, промышленного, сельскохозяйственного, транспортного, гидротехнического и других видов строительства
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
7/26/1985
SKU: RUSS18559
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Gases »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
As a Replacement Of:
SN 156-79: Instructions on the technology of preparation of heat-resistant concrete
SN 324-72: Instructions for the manufacture, testing and acceptance of reinforced concrete pressure and vibro-pressed pipes
SN 483-76: Instructions for the manufacture of structures and products from concrete, prepared on porous aggregates
SN 488-76: Instructions for the preparation of fine-grained (sand) concrete
The Document References:
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10268-80: Heavy concrete. Technical requirements for fillers
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 11159-76: Ferric chloride technical
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12586.0-83: Reinforced-concrete vibrohydropressed pressure pipes
GOST 12586.1-83: Reinforced-concrete hydraulically forged pressure culverts. Design.
GOST 12966-85: Aluminum sulfate technical purified. Technical conditions
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 13015.2-81: Prefabricated concrete and reinforced concrete constructions and products. Marking
GOST 13015.3-81: Prefabricated concrete and reinforced concrete constructions and products. Quality certificate
GOST 13015.4-84: Prefabricated concrete and reinforced concrete costructions and products. Rules for transportation and storage
GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 15825-80: Coloured Portland cement. Specifications
GOST 16349-85: Cyclic mixers for building materials
GOST 18105.0-80: Concrete. Strength control rules. General principles
GOST 18105.1-80: Concrete. Compression strength control rules for prefabricated structures
GOST 19292-73: Welded joints of embedded parts of prefabricated reinforced concrete structures. Contact and automatic welding by melting. Main types and structural elements
GOST 20910-90: Refractory concretes. Specifications
GOST 20955-75: Fillers for heat-resistant concrete. Classification and technical requirements
GOST 20956-75: Fine-grained additives for heat-resistant concrete. Classification and technical requirements
GOST 22266-76: Sulphate resisting cements. Specifications
GOST 22362-77: Reinforced concrete structures. Methods for determination of reinforcement tensioning force
GOST 22856-89: Decorative crushed natural stone and sand. Specifications
GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications
GOST 23676-79: Balance for static weighing capacity limits. Metrological parameters
GOST 24211-2003: Additives for concretes and mortars. General specifications
GOST 24619-81: Scale weighers of proportioning action, scales and scale weighers of continuous action. Capacity limits. Metrological parameters
GOST 25781-83: Steel moulds for reinforced concrete members. Specifications
GOST 25820-83: Lightweight concrete. Specifications
GOST 26819-86: Reinforced concrete pressure pipes with steel mandrel
GOST 5802-86: Mortars. Test methods.
GOST 6318-77: Sodium sulfate technical. Technical conditions
GOST 6508-81: Mortar batch mixers, cyclical. Specification
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.402-80: Metal surface preparation for painting
GOST 9483-81: Square dial circular signs. General specifications
GOST 965-89: Portland cements, white. Specification
ONTP 7-80: Sectoral norms of technological design of precast concrete enterprises
SN 156-79: Instructions on the technology of preparation of heat-resistant concrete
SN 245-71: Sanitary standards for the design of industrial enterprises
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SN 324-72: Instructions for the manufacture, testing and acceptance of reinforced concrete pressure and vibro-pressed pipes
SN 393-78: Instructions for welding of reinforcement joints and embedded parts of reinforced concrete structures
SN 483-76: Instructions for the manufacture of structures and products from concrete, prepared on porous aggregates
SN 488-76: Instructions for the preparation of fine-grained (sand) concrete
SN 513-79: Temporary norms for calculating the consumption of thermal energy in the heat-moisture treatment of precast concrete and reinforced concrete products in the factory
SNiP 5.01.23-83: Standard cement consumption rates for the preparation of precast concrete and monolithic concrete, reinforced concrete products and structures
SNiP II-12-77: Noise protection
SNiP II-4-79: Natural and artificial lighting
The Document is Referenced By:
GOST 12586.1-83: Reinforced-concrete hydraulically forged pressure culverts. Design.
GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 25820-83: Lightweight concrete. Specifications
GOST 25912.0-91: Reinforced concrete slabs for aerodrome pavement
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
Manual for SNiP 3.09.01-85: Manual on the use of chemical additives in the production of precast concrete structures and products
Manual for SNiP 3.09.01-85: Manual for the heat treatment of precast concrete structures and products
Manual for SNiP 3.09.01-85: The technology of manufacturing reinforced concrete pressure pipes with a steel core
Manual for SNiP 3.09.01-85: Manual for the heat treatment of reinforced concrete products with natural gas combustion products
Manual for SNiP 3.09.01-85: Production of prefabricated self-reinforced concrete structures and products
Manual for SNiP 3.09.01-85: Reinforced concrete molding technology manual
Manual for SNiP 3.09.01-85: Manual for heliothermal processing of concrete and reinforced concrete products using SVITAP coatings
Manual for SNiP 3.09.01-85: Manual for heliothermal treatment of concrete and reinforced concrete products using film-forming compounds
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-7.2000: Guidelines On Procedure for State Supervision for Compliance with Construction Standards and Codes during Construction and Installation Activities at Industrial Facilities
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.026-2012: Design and calculation guidelines for pile-anchor structures of highways
ODM 218.3.012-2011: Cements for concrete coatings and road foundations
ODM 218.3.039-2014: Recommendations for testing film-forming materials for the care of freshly laid concrete
ONTP 07-85: All-Union norms for the technological design of precast concrete enterprises
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
OSN-APK 2.10.32.001-04: Instructions for the use of chemical additives in concrete and mortars for rural construction
OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications
R 50-605-92-94: Energy conservation. Facility for heat-humidity processing composite ferro-concrete sets. Specifications of heat energy consumption
RB-005-98: Requirements to Certification of Building Structures Important for Safety of Nuclear Facilities
RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities
RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities
RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises
RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures
RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet
RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber
RTM 36.44.12.2-90: Design and Installation of Foundations Using Pile Driven by Pushing
RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.06.04-91: Bridges and pipes
SNiP 82-02-95: Federal (standard) element cement consumption rates at manufacture of concrete and reinforced concrete products and structures
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 32-103-97: Design of offshore protection structures
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
VNTP 1-90/Mintransstroj, MPS: Departmental rules for the process design of heat treatment procedures for reinforced concrete bridge structures
VSN 132-92: Execution and Acceptance Requirements for Injection Grouting Behind Tunnel Liner
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.