imgalt

GOST 8.417-2002

ГОСТ 8.417-2002

State system for ensuring the uniformity of measurements. Units of quantities

Государственная система обеспечения единства измерений. Единицы величин

Status: Effective - Supersedes. IUS 5-2003

The standard establishes the units of physical quantities used in the country: the names, designations, definitions and rules for the use of these units. The standard does not establish units of values that are evaluated on conventional scales (conventional scales are understood, for example, the International Sugar Scale, scales of hardness, photosensitivity of photographic materials), units of production, as well as the designation of units of physical quantities for printers with a limited set of characters (GOST 8.430 ).

Стандарт устанавливает единицы физических величин, применяемые в стране: наименования, обозначения, определения и правила применения этих единиц. Стандарт не устанавливает единицы величин, оцениваемых по условным шкалам (под условными шкалами понимают, например, Международную сахарную шкалу, шкалы твердости, светочувствительности фотоматериалов), единицы количества продукции, а также обозначения единиц физических величин для печатающих устройств с ограниченным набором знаков (по ГОСТ 8.430).

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Russian Federation for Standardization and Metrology, 2/4/2003

SKU: RUSS18560

Price: $148.50



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 1 Organization and management of metrological support » 1.1 Basic provisions of metrological support »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T80 Rules, norms, regulations infield of ensuring uniformity of measurements »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » State system for ensuring the uniformity of measurements (GSI) »


As a Replacement Of:

GOST 8.417-81: State system of ensuring the uniformity of measurements. Units of physical quantities

The Document References:

GOST 8.417-81: State system of ensuring the uniformity of measurements. Units of physical quantities

GOST 8.430-88: State system for ensuring the uniformity of measurements. Symbols for units of physical quantities to be used imprinting devices with a limited set of signs

RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

The Document is Referenced By:

GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication

GOST 12.0.005-2014: System of labor safety standards Metrological support in the field of occupational safety. The main provisions

GOST 12.2.085-2017: Pipeline valves. Safety valves. Selection and calculation of capacity

GOST 12.2.091-2002: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

GOST 12.2.091-2012: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

GOST 17601-90: Marine centrifugal separators. Acceptance and methods of tests

GOST 18675-2012: Design documentation for aircraft and furnished equipment operation and maintenance

GOST 2.004-88: Unified system for design documentation. General requirements for performing design and technological documentation on printing and graphical output devices of computers

GOST 2.105-95: General requirements for writing documents

GOST 2.612-2011: Unified system of design documentation. Electronic logbook. General principles

GOST 21.408-2013: System of design documents for construction. Rules of industrial process automation working documentation execution

GOST 22261-94: Measuring instruments for electrical

GOST 25372-95: Symbols for alternating-current electricity meters

GOST 25555.5-2014: Fruit and vegetables processing products. Methods for determination of sulfur dioxide

GOST 26828-86: Instrumentation and machine building products. Marking

GOST 28608-90: Fixed resistors for use in electronic equipment. Part 1. General specification

GOST 28896-91: Fixed capacitors for use in electronic equipment. Part 1. General specifications

GOST 29024-91: Turbidimetric and nephelometric liquid analyzers

GOST 29032-2022: Fruit and vegetable products. Determination of 5-hydroxymethylfurfural content by spectrophotometric method

GOST 29074-91: Equipment for monitoring of radiation situation. General requirements

GOST 29226-91: Viscometers for liquids

GOST 30319.1-2015: Natural gas. Methods of calculation of physical properties. General statements

GOST 30345.0-95: Safety of household and similar electrical appliances. General requirements

GOST 30934.1-2002: Erecting cranes Crane operator's manual Part 1 General provisions.

GOST 31430-2011: Thermal insulating products in building applications. Method for determination of organic content

GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements

GOST 32068-2013: Subscribers telephone equipment. Safety requirements and test methods

GOST 32434-2013: Testing of chemicals of environmental hazard. Phototransformation of chemicals in water. Directphotolysis

GOST 32498-2013: Buildings and structures. Method for determining energy efficiency of interior lighting

GOST 33164.3-2014: Mining and tunneling equipment. Timbering, mechanized. Hydraulic control systems. Safety requirements and methods of testing

GOST 33353.3-2019: Unified interstate cataloging system. Product catalog sheet. Development Rules

GOST 34024-2016: Safe locks. Requirements and methods of tests for resistance to unauthorized opening

GOST 34070-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Technical requirements

GOST 34093-2017: Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities

GOST 34396-2018: Oil and oil products custody transfer metering systems. General specifications

GOST 34569-2019: The main pipeline transport of oil and oil products. Devices for discharge of bulk oil and petroleum products. General specifications

GOST 34570-2019: Fruits, vegetables and their processed products. Potentiometric method for the determination of nitrates

GOST 4.114-2019: Pipe fittings. Nomenclature of key indicators

GOST 4.392-85: Product-quality index system. Electricity meters. Index nomenclature

GOST 4.458-2019: The system of indicators of product quality. Processing products of fruits, vegetables and mushrooms. Nomenclature of indicators

GOST 7.32-2001: System of standards on information, librarianship and publishing. The research report. Structure and rules of presentation

GOST 7.32-2017: Sistema standartov po informatsii, bibliotechnomu i izdatel'skomu delu. Otchet o nauchno-issledovatel'skoj rabote. Struktura i pravila oformleniya

GOST 8.315-2019: State system for ensuring the uniformity of measurements. Standard samples of the composition and properties of substances and materials. Key Points

GOST 8.430-88: State system for ensuring the uniformity of measurements. Symbols for units of physical quantities to be used imprinting devices with a limited set of signs

GOST 8.567-2014: State system for ensuring the uniformity of measurements. Time and frequency measurements. Terms and definitions

GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements

GOST 8.586.5-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure

GOST ISO 13678-2022: Casing, tubing, pipe and drill-string elements for the oil and gas industry. Evaluation and testing of thread lubricants

GOST ISO 15241-2014: Rolling bearings. Symbols for physical quantities

GOST ISO 1940-1-2007: Vibration. Balance quality requirements for rotors in a constant (rigid) state. Part 1. Specification and verification of balance tolerances

GOST ISO 8178-1-2013: Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement of gaseous and particulate exhaust emissions

GOST R 1.11-99: State system for standardization of Russian Federation. Metrological expert evaluation of state standards projects

GOST R 1.17-2015: Standardization in the Russian Federation. Expert for standardization. General requirements

GOST R 1.17-2017: Standardization in the Russian Federation. Expert for standardization. General requirements

GOST R 1.19-2023: Standardization in the Russian Federation. Code of Practice. Rules of construction, statement, design and marking

GOST R 1.3-2018: Standardization in the Russian Federation. Product specifications. General requirements for content, design, labeling and updating

GOST R 1.5-2002: State system for standardization of Russian Federation. Standards. General requirements for structure, drafting, presentation, content and indication

GOST R 1.6-2013: Standardization in the Russian Federation. Draft standards. Rules of organization and realization of expertise

GOST R 1.7-2008: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of presentation and indication by development on the basis of application of international standards

GOST R 18.12.01-2015: Technology of the aviation fuelling. Functional and technological parameters of airfield fuelling tankers (tankers). Customer requirements

GOST R 18.12.05-2022: Aviation fuel supply technologies. Means of aviation fuel supply filtration. Test methods for microfilter elements

GOST R 2.105-2019: Unified system of design documentation. General requirements for text documents

GOST R 50538-93: Miniature fuses. Cartridge fuse-links

GOST R 50696-2006: Domestic cooking appliances burning gas. General technical requirements and test methods

GOST R 51045-2014: Rails of ways technological railways transport. General specifications

GOST R 51053-2012: Locks high security. Requirements and tests for according to their resistance to unauthorized opening

GOST R 51103-2011: Cinematography. Professional motion-picture equipment and apparatus. Safety requirement and test methods

GOST R 51103-97: Cinematography. Professional motion-picture equipment and apparatus. Safety requirement and control methods

GOST R 51143-2018: Starting complexes and integration site and filling-neutralization station for rocket of space using. The requirements to tests

GOST R 51232-98: Drinking water. General requirements for organization and quality control methods

GOST R 51242-98: Mechanical protective constructions and electromechanical protective constructions for doorways and windows ventings. Technical requirements and test methods for breaking resistance

GOST R 51672-2000: Metrological ensuring of product testing for the assurance of conformity. General principles

GOST R 51712-2001: Indicator tubes. General specifications

GOST R 51725.17.1-2016: Catalogization of products for federal state needs. Formulation of terminology in Russian language for Russian open technical dictionary. General requirements

GOST R 51740-2016: Specifications for food products. General requirements for development and lay out

GOST R 51865-2002: Macaroni products. General specifications

GOST R 51945-2002: Aspirators. General specifications

GOST R 52319-2005: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

GOST R 52501-2005: Water for analytical laboratory use. Specifications

GOST R 52529-2006: Meat and meat products. Method of electron paramagnetic resonance for indication of radiation-treated meat and meat products containing bones

GOST R 52572-2006: Geographical information systems. Coordinate frame. General requirements

GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements

GOST R 52908-2008: Thermal insulating products for building applications. Method for determination of organic content

GOST R 52914-2008: Tractor and combine harvester engines. Vibroacоustic characteristics and testing methods

GOST R 52932-2008: Electromagnetic, ultrasonic, vortex and fluid oscillator counters for water heat supply systems. General specifications

GOST R 52956-2008: Hard magnetic sintered materials on basis neodymium-iron-boron alloys. Classification. Main parameters

GOST R 53009-2008: Environmental control and monitoring systems. General guidelines on creation, adoption and ensuring functioning of the chemical weapons destruction

GOST R 53375-2009: Oil and gas wells. Geological-technological logging. General requirements

GOST R 53375-2016: Oil and gas wells. Geological-technological logging. General requirements

GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements

GOST R 53579-2009: System of standards in geological exploration of subsurface. Report on geological study of subsurface. General requirements for content and presentation

GOST R 53619-2009: Fish, non-fish objects and products from them. Technological instruction. Rules of structure, drafting, presentation, indication, taking over and registry

GOST R 53623-2009: Information technology. Computing information systems. Computer-based equipment for school. Quality characteristics. Technical requirements

GOST R 53710-2009: Oil and gas-oil fields. Rules for reservoir engineering

GOST R 54022-2010: Global navigation satellite systems. Flying vehicles trajectory measurement system based on satellite navigation systems. General technical requirements and test methods

GOST R 54089-2010: Integrated Logistic Support. Product Electronic Dossier. General principles

GOST R 54089-2018: Integrated logistic support. Product electronic dossier. General provisions and general requirements

GOST R 54091-2010: Engines for motor cultivators and small-sized tractors. Vibroacoustic characteristics and test methods

GOST R 54418.25.2-2014: Renewable power engineering. Wind power engineering. Wind turbines. Part 25-2. Communications for monitoring and control of wind power plants. Information models

GOST R 54422-2011: Small craft. Owner’s manual

GOST R 54455-2011: Alarm systems. Environmental test methods

GOST R 54763-2011: Medicinal remedies for veterinary. Manufacture production regulations. The maintenance, order of working out, the coordination and confirmation

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 55610-2013: Oil measuring systems. General specifications

GOST R 55867-2013: Air transport. Metrological support on air transport. General principles

GOST R 56157-2014: Soil. Procedures (methods) of analysis of composition and properties of soil samples. General requirements for development

GOST R 56447-2015: Gas, gas condensate, oil, gas and condensate deposits. Software for seismic data processing and interpretation. Main functional and technical requirements

GOST R 56448-2015: Gas, gas condensate, oil, gas and condensate deposits. Software for geological reservoir modelling. The main functional and technical requirements

GOST R 56449-2015: Gas, gas condensate, oil, gas and condensate deposits. Software for flow simulation of hydrocarbon fields. The main functional and technical requirements

GOST R 56450-2015: Gas, gas condensate, oil, gas and condensate deposits. Software for hydraulic simulation of surface network and facilities. The main functional and technical requirements

GOST R 56514-2015: Strength standard for automated spacecraft

GOST R 56539-2015: Gas and gas-condensate fields projection and development. Estimation of gas and gas-condensate reserves on the basis of material balance equation. General technical requirements

GOST R 56676-2015: Gas and condensate field development project. Volumetric method of gas and gas-condensate reserves estimation. Main technical requirements

GOST R 56806-2015: Polymer composites. Identification of polymer composites in electronic databases

GOST R 56807-2015: Polymer composites. Recording of mechanical test data of polymer composites in electronic databases. General requirements

GOST R 56851-2016: Liquefied natural gas. Method for calculation of thermodynamic properties

GOST R 57105-2016: Integrated Logistic Support. Logistic Support Analysis. Requirements for Database Structure and Content

GOST R 57122-2016: Gas, gas condensate, oil and gas, oil and gas condensate deposits. Software for well planning and drilling engineering. The main functional and technical requirements

GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 58036-2017: Petroleum and natural gas industry. Offshore oil and gas field structures. Weight control during engineering and construction

GOST R 58042-2017: Gas, gas condensate, oil and gas, oil and gas condensate deposits. Main requirements to initial data of software program complexes for decision of sewch, exploration and development of deposits

GOST R 58043-2017: Designing and development of gas, gas condensate, oil and gas, oil and gas condensate deposits. Geological and technological data transfer. General requirements

GOST R 58362-2019: The main pipeline transport of oil and oil products. Automation and telemechanization of technological equipment. Key Points, Terms and Definitions

GOST R 58597-2019: Additive technology. Additive technology non-destructive testing

GOST R 58601-2019: Unified energy system and isolated energy systems. Operational Dispatch Management. Relay protection and automation. Autonomous emergency recorders. Norms and requirements

GOST R 58613-2019: Design and development of gas, gas condensate, oil and gas and oil and gas condensate fields. The movement of geological and technological information in the process of geological and hydrodynamic modeling in the fields

GOST R 58889-2020: Engineering survey. Requirements for the maintenance and execution of field documentation when driving and testing engineering and geological workings

GOST R 58938-2020: A system for ensuring the accuracy of geometric parameters in construction. Basic Provisions

GOST R 59988.00.0-2022: Computer-aided design systems for electronics. Information support. Technical characteristics of electronic components. General provisions

GOST R 59988.02.1-2022: Computer-aided design systems for electronics. Information support. Technical characteristics of electronic components. Integrated circuits. Specification of declarative knowledge on technical characteristics

GOST R 59988.02.2-2022: Computer-aided design systems for electronics. Information support. Technical characteristics of electronic components. Integrated circuits. List of technical characteristics

GOST R 59988.03.1-2022: Computer-aided design systems for electronics. Information support. Technical characteristics of electronic components. Semiconductor devices and modules. Specification of declarative knowledge on technical characteristics

GOST R 59988.03.2-2022: Computer-aided design systems for electronics. Information support. Technical characteristics of electronic components. Semiconductor devices and modules. List of technical characteristics

GOST R 59988.04.1-2022: Computer-aided design systems for electronics. Information support. Technical characteristics of electronic components. Optoelectronic devices. Specification of declarative knowledge on technical characteristics

GOST R 59988.04.2-2022: Computer-aided design systems for electronics. Information support. Technical characteristics of electronic components. Optoelectronic devices. List of technical characteristics

GOST R 60.6.3.10-2019: Robots and robotic devices. Test methods service mobile robots to work in extreme conditions. Patency. Movement with a towed object

GOST R 60.6.3.11-2019: Robots and robotic devices. Test methods service mobile robots to work in extreme conditions. Human interaction with the robot when performing search work. Arbitrary mazes on difficult terrain

GOST R 60.6.3.12-2019: Robots and robotic devices. Test methods service mobile robots to work in extreme conditions. Line of sight radio communication

GOST R 60.6.3.13-2019: Robots and robotic devices. Test methods service mobile robots to work in extreme conditions. Out of line of sight radio communications

GOST R 60.6.3.2-2019: Robots and robotic devices. Test methods of service mobile robots to work in extreme conditions. Patency. Crack Overcoming

GOST R 60.6.3.3-2019: Robots and robotic devices. Test methods of service mobile robots to work in extreme conditions. Patency. Overcoming barriers

GOST R 60.6.3.4-2019: Robots and robotic devices. Test methods of service mobile robots to work in extreme conditions. Patency. Inclined Driving

GOST R 60.6.3.5-2019: Robots and robotic devices. Test methods of service mobile robots to work in extreme conditions. Patency. Staircase

GOST R 60.6.3.6-2019: Robots and robotic devices. Test methods service mobile robots to work in extreme conditions. Patency. Surface movement with longitudinal irregularities

GOST R 60.6.3.7-2019: Robots and robotic devices. Test methods service mobile robots to work in extreme conditions. Patency. Surface movement with transverse irregularities

GOST R 60.6.3.8-2019: Robots and robotic devices. Test methods service mobile robots to work in extreme conditions. Patency. Surface movement with stepped irregularities

GOST R 60.6.3.9-2019: Robots and robotic devices. Test methods service mobile robots to work in extreme conditions. Patency. Sustained Speed

GOST R 7.0.12-2011: System of standards on information, librarianship and publishing bibliographic record. Abbreviation of words and word combinations in Russian. General requirements and rules

GOST R 7.0.14-2011: System of standards on information, librarianship and publishing. Reference Editions. Basic types, structure, publishing and printing presentation

GOST R 7.0.99-2018: System of standards on information, librarianship and publishing. Abstract and annotation. General requirements

GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters

GOST R 70336-2022: Diamonds for technical purposes. Technical conditions

GOST R 70594-2022: Natural raw emeralds. Requirements for sorting and primary grading, grading and grading

GOST R 8.1015-2022: State System for Ensuring Uniformity of Measurements (GSI). Metrological expertise of normative and technical documentation in the field of atomic energy use. Organization and basic requirements to the content

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.568-2017: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

GOST R 8.589-2001: State system for ensuring the uniformity of measurements. Control of nature environment soiling. Metrological ensuring. General principles

GOST R 8.613-2005: State system for ensuring the uniformity of measurements. Procedures for quantitative chemical analysis of water samples. General requirements for development

GOST R 8.613-2013: State system for ensuring the uniformity of measurements. The procedures (methods) of measurements of structure and properties of water samples. General requirements to development

GOST R 8.661-2009: State system for ensuring the uniformity of measurements. Oil moisture meters. Norms of metrological characteristics

GOST R 8.662-2009: State system for ensuring the uniformity of measurements. Natural gas. Gas phase thermodynamic properties. Methods of calculation for transmission and distribution applications on base of the AGA8 fundamental equation of state

GOST R 8.674-2009: State system for ensuring the uniformity of measurements. General requirements for measuring instruments and systems and devices with measuring function

GOST R 8.676-2009: State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring ethanol content in gaseous and liquid media

GOST R 8.703-2010: State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles

GOST R 8.737-2011: State system for ensuring the uniformity of measurements. Geophysical well logging and petrophysical study of rock, fluids and gas samples. Units of measured quantities

GOST R 8.738-2011: State system for ensuring the uniformity of measurements. Field geophysical survey. Units of measured quantities

GOST R 8.758-2011: State system for ensuring the uniformity of measurements. Coulometric hygrometers. General specifications

GOST R 8.769-2011: State system for ensuring the uniformity of measurements. Natural gas. Compression factor of gas phase. Method of calculation based on gas physical properties

GOST R 8.770-2011: State system for ensuring the uniformity of measurements. Natural gas. The dynamic viscosity of compressed gas with a known component composition. The method of calculation

GOST R 8.810-2012: State system for ensuring the uniformity of measurements. Reference materials. The programme and procedure for the determination of metrological characteristics

GOST R 8.811-2012: State system for ensuring the uniformity of measurements. Psychometric tables. Constitution, content, calculating correlations

GOST R 8.823-2013: State system for ensuring the uniformity of measurements. Meters for hot water. General metrological and technical requirements

GOST R 8.871-2014: State system for ensuring the uniformity of measurements. In house reference materials, reference materials of the branches. The general requirements

GOST R 8.890-2015: State system for ensuring the traceability of measurements. Optoelectronic instruments as a part of space-based informational and measuring systems for Earth Observation. Organizational and methodical provisions for ensuring the uniformity of radiometric measurements

GOST R 8.902.1-2015: The state system of ensuring the uniformity of measurements. Variable pressure drop technique. Special orifices. Part 1. Principle of measurement technique and general requirements

GOST R 8.915-2016: State system for ensuring the uniformity of measurements. Diaphragm volumetric gas meters. General technical requirements, test and calibration methods

GOST R IEC 60350-1-2019: Household electrical appliances for cooking. Part 1. Cookers, ovens, steam ovens and grills. Functional Measurement Methods

GOST R ISO 13680-2011: Seamless casing, tubing and coupling stock from corrosion-resistant high-alloy steels and alloys for petroleum and natural gas industries. Specifications

GOST R ISO 15189-2006: Medical laboratories. Particular requirements for quality and competence

GOST R ISO 15189-2009: Medical laboratories. Particular requirements for quality and competence

GOST R ISO 15194-2007: In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials

GOST R ISO 3183-2009: Steel pipes for pipelines of petroleum and natural gas industries. General specifications

GOST R ISO 4226-2012: Air quality. General aspects. Units of measurement

M 15-2019: Recommendation. General requirements for analysis methods

Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities

Methodical manual: Hotel building design

Methodical manual: Classification methods of information modeling tasks

Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation

Methodical manual: Building Design for Refrigerators

MI 2222-92: State system for ensuring the uniformity of measurements. Types of measurements. Classification

MI 2267-2000: State system for ensuring the uniformity of measurements. Ensuring the effect of measurements by the control of technological processes. Metrological examination of technical documents

MI 2334-2002: State system for ensuring uniformity of measurements. Certified mixtures. General development requirements

MI 2667-2004: Recommendation. State system for ensuring uniformity of measurements. Consumption and quantity of liquids and gases. The method of measurement using averaging tubes ANNUBAR DIAMOND II and ANNUBAR 485. Basic provisions

MI 2667-2011: Recommendation. State system for ensuring uniformity of measurements. Consumption and quantity of liquids and gases. Measurement techniques using averaging pressure tubes ANNUBAR DIAMOND II, ANNUBAR 285, ANNUBAR 485 and ANNUBAR 585. Basic provisions

MI 2837-2003: Oil hand-over and acceptance points metrological and technical support

MI 2976-2006: Recommendation. State system for ensuring uniformity of measurements. Construction, content and presentation of documents governing the methods of quantitative chemical analysis

MI 3212-2009: State system for ensuring uniformity of measurements. Consumption and quantity of natural gas. Measurement technique for determining the tightness of impulse lines of pines (pneumatic systems for measuring pressure drop and pressure) according to GOST 8.586. (1-5) -2005 measuring systems with restricting devices

MI 3269-2010: Recommendation. State system for ensuring uniformity of measurements. Construction, presentation, design and content of documents on methods (methods) of measurement

MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support

MR 30-844-2001: The organization of personnel training and the procedure for conducting a certification test of knowledge on radiation safety at the enterprises of the Ministry of Atomic Energy of Russia. Guidelines

MU 2.6.5.009-2016: Volumetric activity of radionuclides in the air at workplaces. Requirements for determining the average annual activity volume

MUK 4.1.001-13: Methods of measuring the mass concentration of formaldehyde in samples of drinking, natural, treated wastewater and melted snow (snow) by the photometric method

MUK 4.1.002-13: Methods of measuring the mass concentration of 1, 1-dimethylhydrazine in washes from equipment surfaces, building structures, skin and personal protective equipment by photometric method

MUK 4.1.003-13: Measurement of mass concentration of 1, 1-dimethylhydrazine in the blood by spectrophotometric method

MUK 4.1.004-13: Method for measuring the mass concentration of ammonium perchlorate (perchlorate ion) in the urine by the potentiometric method

MUK 4.1.005-13: Methods for measuring the mass concentration of tetramethyl tetrazene in the air of the working area by the photometric method

MUK 4.1.006-13: Methods of measuring the mass concentration of formaldehyde in the air of the working area by the photometric method

MUK 4.1.007-13: Methods of measuring the mass concentration of nitrogen dioxide in the air of the working area by the photometric method

MUK 4.1.008-13: Method for measuring the mass concentration of dimethylamine in samples of drinking, natural, treated wastewater and snowmelt (snow) by the photometric method

MUK 4.1.011-18: Method for measuring the mass concentration of formaldehyde in samples of drinking, natural, treated wastewater and melt (snow) water by the photometric method

MUK 4.1.012-18: The method of measuring the mass concentration of dimethylamine in samples of drinking, natural, treated wastewater and melt (snow) water by Photometric method

MUK 4.1.015-11: Methods of measuring the mass fraction of tetramethyltetrazene in soil samples by the photometric method

MUK 4.1.016-11: Methods of measuring the mass fraction of nitrosodimethylamine in soil samples by the photometric method

MUK 4.1.017-11: Methods of measuring the mass concentration of nitrosodimethylamine in the air of the working area by the photometric method

MUK 4.1.018-11: Methods for measuring the mass concentration of dimethylamine in the air of the working area by the photometric method

MUK 4.1.019-11: Measurement method of the mass fraction of 1, 1-dimethylhydrazine in soil samples by photometric method

MUK 4.1.020-11: Methods of measuring the mass concentration of 1, 1-dimethylhydrazine in the air of the working area by the photometric method

MUK 4.1.034-17: Methods of measuring the mass concentration of ammonium perchlorate in the air of the working area by the photometric method

MUK 4.1.035-17: The method of measuring the mass concentration of ammonium perchlorate in the washes from equipment surfaces, building structures, skin and personal protective equipment by the photometric method

MUK 4.1.036-17: Methods of measuring the mass concentration of epichlorohydrin in the air of the working area by the photometric method

MUK 4.1.058-10: Methods for measuring the mass concentration of epichlorohydrin in the air of the working area by the photometric method

MUK 4.4.052-08: Measurement of ambient dose equivalent and ambient equivalent dose of gamma radiation using gamma radiation dosimeters DKG-02U Arbiter, DKG-01D Garant, DKG-03D Grach, MKS RM-1401K radiation monitoring in an emergency

ODM 218.2.012-2011: Classification of structural elements of artificial road structures

ODM 218.4.001-2008: Guidelines for the organization of inspection and testing of bridge structures on highways

ODM 218.5.014-2019: Methodology for monitoring the performance and monitoring of metrological characteristics of complexes of automated weight and size control

ODM 218.5.015-2019: Guidelines for measuring the deformation of the roadbed of roads using the principles of inclinometry

Order 3263: On improving the organization of work on the preparation of draft standards for approval and publication

Order 704: Federal norms and rules in the field of industrial safety "Instructions for monitoring the composition of mine air, determining gas content and establishing categories of mines for methane and / or carbon dioxide"

OST 45.161-2000: Industry Standardization System. Technical conditions for communications. Requirements for the construction and content

OST 45.180-2000: Industry Standardization System. Abbreviations in industry regulations. Application procedure

PMG 92-2009: The metrological expert evaluation of interstate and national standarts projects

PND F 16.1:2.3:3.11-98: Method for performing measurement of metal content in solid objects (soil, composts, cakes, sewage sludge, samples of plant origin) by spectrometry with inductively coupled plasma

PNST 161-2016: Mining equipment. Multipurpose safety systems and automated control systems for technological processes in the mine. Requirements for metrological providing and test methods

PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters

PNST 47-2015: Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests

PNST 55-2015: Underground utilities. Determination of location and depth with non-destructive methods

PR 1323565.1.002-2018: Regulations of fillings and representation of catalogue sheets of products

PR 32.131-98: Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport

PR 50.1.027-2014: Rules for rendering of translation and special types of linguistic services

PR 51-00159093-011-2000: Automatic process control system in gas industry. Metrological assurance. General provisions.

R 50.1.043-2003: Information supplied by the manufacturer with medical devices

R 50.1.102-2014: Compilation and execution of safety data sheet of chemical products

R 50.2.008-2001: National System for Standardization of Measurements. Techniques for Chemical Quantitative Analysis. Scope and Procedure for Execution of Metrological Expert Review

R 50.2.090-2013: State system for ensuring the uniformity of measurements. Quantitative chemical analysis procedures. General requirements for development, certification and application

R 50.2.094-2013: State system for ensuring the uniformity of measurements. The methodology of the metrological examination of the technical regulations of the Customs Union

R 52.14.648-2003: Recommendations. Metrological examination of regulatory and technical documentation

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.0-11.117-2001: Information and measurement systems. Metrological support. General provisions.

RD 153-34.0-11.402-98: Procedural Guidelines. Metrological Certification of Nonstandardized Means of Measurement. Organization and Execution Procedure

RD 22-05-2006: Instructions for office work in the central office of the Federal Service for Environmental, Technological and Nuclear Supervision

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 50-691-89: Guidelines. State system for ensuring uniformity of measurements. Absorbed doses of photon (1-50 MeV) and electron (5-50 MeV) radiation in radiation therapy. Methods of determination

RD 52.10.742-2018: Volumetric concentration of hydrogen sulfide in sea water. Measurement procedure by iodometric method

RD 52.14.617-2000: Instructions. The order of the norm control

RD 52.14.642-2003: Text documents. General requirements for composition, presentation, design, content and designation

RD 52.18.617-2015: Organization and order of conducting the monitoring

RD 52.18.642-2018: Rules for the construction, presentation, design, designation and requirements for the content of text documents

RD 52.18.750-2010: Mass concentration of phenols in waters. Measurement technique by high performance liquid chromatography using solid phase extraction. NGO "Typhoon"

RD 52.18.786-2013: The basic territorial subsystem of radiation monitoring of Roshydromet. Ensuring uniformity of measurements. Main provisions

RD 52.18.845-2016: Structure, content and rules for the formation of rocket experiment programs

RD EO 1.1.2.25.0705-2006: Maintenance and repair of systems and equipment of nuclear power plants. Documents of the program and regulations. Types and completeness. Requirements for the content and design

RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95

RM 4-2-96: Computer-aided design system. Automated systems. Directions for application

RMD 23-27-2017 Sankt-Peterburg: Recommendations for normalizing the temperature and humidity conditions of unheated attic spaces

RMG 129-2013: State system for ensuring the uniformity of measurements. Requirements to the specialists in the sphere of ensuring of measurements uniformity, working in the field of legal metrology (experts-metrologists)

RMG 63-2003: State system for ensuring the uniformity of measurements. Providing measurement efficiency in control of technological processes. Metrological expertise of the technical documentation

RMG 75-2004: State system for ensuring the uniformity of measurements. Measurements of substances moisture. Terms and definitions

RMG 75-2014: State system for ensuring the uniformity of measurements. Measurements of substances moisture. Terms and definitions

ST RK 1842-2008: Trucks and traction rolling stock chassis. Strength tests

ST RK GOST R 51232-2003: Water. General requirements for quality control organization and methods

ST RK IEC 61310-2-2008: Machine safety. Indication, marking and start. Part 2. Labeling requirements. Introduced for the first time

STB 1188-99: Drinking water. General requirements for the organization and quality control methods

STO 1.1.1.01.003.0668-2013: Technical documentation. Rules for the construction, presentation, design and designation of regulatory documents

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
imgalt
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
imgalt
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
imgalt
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
imgalt
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
imgalt
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
imgalt
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
imgalt
Chemical production safety passport. General requirements
Language: English
Price: $90.09
imgalt
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
imgalt
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
imgalt
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
imgalt
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $523.71
imgalt
Fish products. Canned tuna and bonito in water or oil
Language: English
Price: $159.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!