Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
Прокат листовой из углеродистой, низколегированной и легированной стали для котлов и сосудов, работающих под давлением Технические условия
Status: Restored in the Russian Federation for individual industries on 07/05/2020. for use at nuclear facilities; Rosstandart order No. 829 of 04/16/2019; registration information 360-st dated 07/03/2019 (official website of Rosstandart; FSUE "Standardartinform")
The standard applies to rolled sheets of carbon, low-alloyed and alloyed steel with a thickness of 4 to 160 mm in hot-rolled and thermally processed condition, suitable for welding and intended for the manufacture of parts and parts of boilers and vessels operating under pressure at room, elevated and sub-zero temperatures.
Стандарт распространяется на листовой прокат из углеродистой, низколегированной и легированной стали толщиной от 4 до 160 мм в горячекатаном и термически обработанном состоянии, пригодный для сварки и предназначенный для изготовления деталей и частей котлов и сосудов, работающих под давлением при комнатной, повышенной и минусовых температурах.
Format: Electronic (pdf/doc)
Page Count: 20
Approved: USSR State Committee for Standards,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
77 Metallurgy »
Standards for pipe fittings (TPA) »
10. Production »
10.2 Billets (forgings, stampings, rolling, castings, etc.) »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.30 Steels for working under pressure »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.30 Steels for working under pressure »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V2 Carbon steel of ordinary quality (ordinary stock) »
V23 Sheets and Stripes »
The Document is Replaced With:
GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
As a Replacement Of:
GOST 5520-69: Steel sheet, carbon and low-alloy for boiler construction and pressure vessels. Technical requirements
The Document References:
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 14019-80: Metals. Methods of bend tests
GOST 1497-84: Metals. Methods of tension test
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction
GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-94: Metal products
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9651-84: Metals. Methods of tension tests at elevated temperatures
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
The Document is Referenced By:
ATK 24.202.09-2004: Shell-and-tube heat exchangers with a floating head and U-tubes, doubled. Main dimensions
ATK 24.202.10-2007: Album typical designs. Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell. Blocks. Main dimensions
ATK 24.218.01-90: Bosses, Plugs, and Gaskets. Design, Dimensions, and General Technical Specifications
ATK 24.218.04-90: Liquid mesh filters for pipelines. Design, dimensions and dimensions
ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements
ATK 26-01-1-89: Pipeline viewing lights. Types and designs
ATK 26-18-5-93: Album typical designs. Steel turning plugs for rebar flanges. Design, dimensions and specifications
GOST 10037-83: Autoclaves for building industry
GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications
GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions
GOST 10731-85: Surface-type evaporators for steam-turbine power stations
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 14022-78: Anhydrous hydrogen fluoride. Specification
GOST 14022-88: Anhydrous hydrogen fluoride
GOST 14106-80: Curing autoclaves
GOST 14245-79: Heat exchangers shell-and-tube with U-shaped tubes. Basic parameters and dimensions
GOST 15119-79: Shell-and-tube evaporators with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions
GOST 15121-79: Shell-and-tube condensers with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions
GOST 15518-83: Plated heat exchangers. Type, basic parameters and dimensions. Technical requirements
GOST 16106-82: Coal-chemical naphthalene. Specifications
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods
GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications
GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications
GOST 23762-79: Shell-and-tube heat exchangers for high temperatures and pressures. Basic parameters and dimensions
GOST 25715-83: Steel hot-rolled rectangular steel slab (slabs). Specification
GOST 27702-88: Steel and alloys. Unified grades
GOST 2770-74: Goal-tar oil for wood impregnation. Specifications
GOST 30482-97: Electroslag welding of steels. Requirements for technological process
GOST 30872-2002: Air cooling machines. General specifications
GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications
GOST 33008-2014: Fireplaces, fireplace inserts, for solid fuels. Requirements and methods of testing
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications
GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 5172-63: Cylindric steel gas-holders with constancy of volume. Parameters and basic dimensions
GOST R 51364-99: Air cooling apparatus. General specifications
GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking
GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control
GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties
GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements
GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements
GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 55064-2012: Sodium hydroxide for industrial use. Specifications
GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications
GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories
OST 108.275.39-80: Bodies of pipe supports of thermal and nuclear power plants. Design and dimensions.
OST 108.275.40-80: Bodies of pipe supports of thermal and nuclear power plants. Design and dimensions.
OST 108.275.50-80: Details and prefabricated units of supports, hangers, ties for lens compensators and drives for remote control of pipe fittings in thermal and nuclear power plants. Technical requirements.
OST 108.318.16-82: Stamped adapter for CHP pipelines. Design and dimensions.
OST 108.318.17-82: Stamped adapter for CHP pipelines. Design and dimensions.
OST 108.382.01-80: Semi-clamps for CHP plants and nuclear thermal power plant pipeline clamp suspension units. Design and dimensions.
OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.
OST 24.125.102-01: CHP and NTPP pipeline suspensions. Plugs. Design and dimensions.
OST 24.125.103-01: CHP and NTPP pipeline suspensions. Links. Design and dimensions.
OST 24.125.104-01: CHP and NTPP pipeline suspensions. Lugs. Design and dimensions.
OST 24.125.105-01: CHP and NTPP pipeline suspensions. Tightening screw. Design and dimensions.
OST 24.125.117-01: CHP and NTPP pipeline suspensions. Welded clamps. Design and dimensions.
OST 24.125.118-01: CHP and NTPP pipeline suspensions. Clamp suspensions on support beam with lugs. Design and dimensions.
OST 24.125.120-01: CHP and NTPP pipeline suspensions. Semi-clamps for clamp supports. Design and dimensions.
OST 24.125.122-01: CHP and NTPP pipeline suspensions. Spring clamp suspensions on support beam. Design and dimensions.
OST 24.125.128-01: CHP and NTPP pipeline suspensions. Semi-clamps for vertical pipelines.
OST 24.125.151-01: Fixed support for thermal and nuclear power plants piping. Design and dimensions.
OST 24.125.152-01: Bodies of fixed pipe supports of thermal and nuclear power plants. Design and dimensions.
OST 24.125.154-01: Slide bearings for pipelines thermal and nuclear power plants. Design and dimensions.
OST 24.125.155-01: Bodies of sliding pipe supports of thermal and nuclear power plants. Design and dimensions.
OST 24.125.170-01: Details and prefabricated units of supports, hangers, ties for lens compensators and drives for remote control of pipe fittings in thermal and nuclear power plants. General Specifications.
OST 24.125.31-89: Welded seams for CHP plant pipeline joints. Types and main dimensions.
OST 24.125.36-89: Stamped and welded bends for pipes of NPP. Design and dimensions.
OST 24.125.39-89: Stamped joints for NTPP pipe lines. Design and dimensions.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.
OST 26.260.460-99: Lobes, locks and pads. Design, dimensions and general technical requirements.
OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.
OST 26-01-1159-75: Pipe input-outputs of steel welded containers and devices. Technical requirements.
OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements
OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.
OST 26-01-342-71: Parts of pipelines. Viewing portholes with flat glass. Design and dimensions
OST 26-01-64-83: Clamps. Design and dimensions.
OST 26-01-82-77: Welding in chemical mechanical engineering. Main provisions and technology.
OST 26-01-84-78: Steel welded seams of pressure-operated vessels and devices. Magnetic-particle method.
OST 26-02-2053-79: Adapter and hatches made of double-layer steel. Technical requirements .
OST 26-02-2060-79: Underground horizontal drainage tanks. Specifications
OST 26-02-601-72: Support lattices under ring packing. Main dimensions and technical requirements.
OST 26-02-602-72: Supporting beams for ring fillings. Design, main dimensions and technical requirements.
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 26-1046-87: High-pressure vessels and devices. Norms and methods of endurance calculation.
OST 26-11-04-84: Steel vessels and devices. Allowable stress.
OST 26-17-01-83: Heat exchangers and standard air cooling devices. Technical requirements to a bead forming with torque limiting.
OST 26-18-3-86: liquid mesh filter for piping. Design, parameters and dimensions.
OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.
OST 26-2091-93: Horizontal support vessels and equipment. Design.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.
OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements
OST 34-10-569-93: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-570-93: Axial two-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-571-93: Axial three-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-723-93: Assembling units and station pipeline hang details, Working pressure<2,2 MPa of CHP plant, nuclear thermal power plant and dust-and-gas windpipes of CHP plant. General technical requirements.
OST 34-10-733-93: Lug with lining. Design and dimensions.
OST 34-10-735-93: Clip for horizontal pipelines. Design and dimensions.
OST 34-10-736-93: Clip for vertical pipelines. Design and dimensions.
OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-10-752-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-10-763-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-10-764-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-42-658-84: Parts and assembly units of NPP pipelines Rwork <2.2 MPa (22 kgf/cm2) T ≤ 350 ° C. Pipes and stock. Assortment.
OST 34-42-747-85: Details and prefabricated units of TPS pipelines, working P<2.2 MPa (22 kg/cm2), t ≤545 °C. Pipes and rolling. Pipe grades.
OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.
OST 34-42-836-86: Flat Flanges for pipes of TPP and NPP. Design and dimensions.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations
PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants
PGVU 246-92: Compensator, rectangular single lens for gas and air ducts
PGVU 247-92: Compensator, rectangular two-lens for gas and air ducts
PGVU 248-92: Three-slip rectangular compensator for gas and air ducts
PGVU 249-92: Four-sided rectangular compensator for gas and air ducts
PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants
RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.
RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 24.942.02-90: Electroslag welding of chemical and petroequipment from low-alloyed and heat-resistant steels
RD 26.260.12-99: Service life extension of liquid carbon dioxide vessels. Instructional guidelines.
RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
RD 26-07-264-86: Anticorrosive weld deposit of sealing surfaces of pipeline fittings.
RD 26-3-86: Procedural Guidelines for Extending the Service Life of Tanks for Liquid Carbon Dioxide
RD 26-4-87: Rules. Equipment for balloonless supply of enterprises with carbon dioxide. Selection and application
RD 26-8-87: Welding of cold-resistant low-alloyed steels used in structures operated at low temperatures
RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.
RD 34.17.435-95: Methodological instructions. Technical diagnostics of boilers with working pressure up to 4.0 MPa inclusive.
RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations
RD 34.40.102: Procedural Guidelines for Design of Water Heat Treatment Units at Thermal Power Stations
RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 51-553-94: Instructions for technical certification of gas accumulators GSS-1-1-10,0-25U-001 during the operation of gas filling stations of gas compressor stations (AGNKS)
RD RTM 26-07-246-80: Design, manufacturing and control regulations for steel pipeline fittings welded joints.
RTM 108.020.126-80: Method of calculation and design of oil coolers for oil supply systems of turbine units
RTM 108.020.39-81: Sealed oil coolers for steam and gas turbines of thermal power plants. General technical requirements
RTM 108.030.21-78: Calculation and design of thermal deaerators
SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes
ST RK 1358-2005: Pressure vessels. Requirements for welding steels
ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications
TU 1303-002-08620133-01-TU-LU: Electrowelded pipes made of carbon and low alloy steels for steam and hot water pipelines
TU 26-01-355-80: Electrolyzers. Type of SPP with component equipment
TU 26-02-1089-88: Type 1-AVG horizontal air coolers Technical conditions
TU 26-02-1098-89: Heat exchangers, shell and tube made of titanium. Technical conditions
TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing
TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions
TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions
TU 3612-013-00220302-99: Shell-and-tube heat exchangers for special purposes. Evaporators with steam space and tube bundles to them
TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
TU 4834-020-01297858-2006: P1 Welded Composite Coupling
VSN 50-83: Design Guidelines for Piping for Liquid Products of Air Separation
ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
Pin AE 5.6: Norms of structural design of nuclear power plants with reactors of different types
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 2-97: Regulations on the system for the technical diagnosis of autoclaves in the production of building materials
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
TU 3615-018-00217320-2006: Spherical tanks. Technical specifications
TU 3615-132-00220302-2008: Ball tanks for liquefied petroleum gases. Specifications
TU 3680-001-04698606-04: Pipe Support
TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications
Customers Who Viewed This Item Also Viewed:
Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Construction in seismic regions of Ukraine
Aviation turbine fuels and kerosine. Determination of smoke point
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Aviation gas turbine fuels. Method for determining thermal oxidative stability
Hazard classification of chemical products. General requirements
Warning labeling of chemical products. General requirements
Safety data sheet for chemical products. General requirements
Hoisting cranes. Rules and test methods
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Aviation turbine fuel. Determination of acidity
Petroleum products. Determination of color by Saybolt chromometer
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Aviation fuels. Calculating net calorific value
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.