GOST 22690-88
ГОСТ 22690-88
|
|
Concretes. Determination of strength by mechanical methods of nondestructive testing
Бетоны Определение прочности механическими методами неразрушающего контроля
Status: Not effective - Superseded. Registration information 1378-st dated 09/25/2015 (the official website of Rosstandart); IUS 3-2016
The standard applies to heavy and light concrete, and establishes methods for determining the compressive strength in structures by elastic-elastic displacement, impact impulse, plastic deformation, separation, spalling, and tearing off by chipping.
Стандарт распространяется на тяжелый и легкий бетоны и устанавливает методы определения прочности на сжатие в конструкциях по упругомуотскоку, ударному импульсу, пластической деформации, отрыву, скалыванию ребра и отрыву соскалыванием.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
9/23/1988
SKU: RUSS18578
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh19 Test methods. Packaging. Marking »
National Standards for OKSTU »
REINFORCED CONCRETE STRUCTURES AND PARTS (INCLUDING REINFORCED CONCRETE CONCRETE PRODUCTS) »
Control methods (testing, analysis, measurements) »
The Document is Replaced With:
GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing
As a Replacement Of:
GOST 21243-75: Сoncrete. Strengh design method of separation with spelling effect
GOST 22690.0-77: Heavy concrete. General requirements for methods for determining the strength without destroying, by the devices of mechanical action
GOST 22690.1-77: Heavy concrete. Methods for determining slope and plastic deformation strength
GOST 22690.2-77: Heavy concrete. Method for determining the strength with a standard Kashkarov hammer
GOST 22690.3-77: Heavy concrete. Method for determination of strength by separation
GOST 22690.4-77: Heavy concrete. Method for determining strength by cleavage of structure ribs
The Document References:
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10587-84: Uncured epoxy resins. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 18105-86: Concretes. Rules for the strength control
GOST 22783-77: Concretes. Method of accelerated determination of compressive strength
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8728-88: Plasticizers. Specifications
GOST R 53231-2008: Concretes. Rules for control and assessment of strength
Order 970: Administrative Regulations on rendering by the Federal Agency on Technical Regulation and Metrology of the state service on type approval of certified reference materials or type of measuring instruments
TU 6-09-5396-88: Reagents. Maleic anhydride pure for analysis
The Document is Referenced By:
GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications
GOST 12504-2015: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13579-78: Concrete blocks for walls of basements. Specifications
GOST 13580-85: Reinforced concrete slabs for strip foundations. Specifications
GOST 17079-88: Reinforced concrete blocks for ventilation. Specifications
GOST 17538-82: Reinforced concrete constructions and products for lift shafts of residential buildings. Specifications
GOST 17608-91: Footway concrete slabs. Specifications
GOST 17624-2012: Concrete. Ultrasonic method of strength determination
GOST 18048-80: Reinforced concrete sanitary cabins. Specifications
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 18105-86: Concretes. Rules for the strength control
GOST 18979-2014: Reinforced concrete columns for multi-storey buildings. Specification
GOST 18979-90: Reinforced concrete columns for multi-storey buildings. Specifications
GOST 18980-2015: Reinforced concrete collar beams for multistory buildings. Specifications
GOST 18980-90: Reinforced concrete collar beams for multi-storey buildings. Specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19330-91: Centrifugal reinforced concrete posts for railway line equipment. Specifications
GOST 19330-99: Centrifugal reinforced concrete posts for railway overhead line equipment. Specifications
GOST 19804.7-83: Two-console reinforced concrete pile-pillars for agricultural buildings. Construction and dimensions
GOST 19804-2012: Reinforced prefabricated concrete piles. Specifications
GOST 19804-91: Reinforced concrete piles. Specifications
GOST 20213-2015: Reinforced concrete roof trusses. Specifications
GOST 20213-89: Reinforced concrete roof trusses. Specifications
GOST 20372-2015: Reinforced concrete rafter and longitudinal beams. Specifications
GOST 20372-90: Reinforced concrete rafter and longitudinal beams. Specifications
GOST 21506-2013: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications
GOST 21506-87: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications
GOST 21924.0-84: Reinforced-Concrete Slabs for Urban Road Pavements. Specifications
GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing
GOST 25628-90: Reinforced concrete columns for single-storey industrial buildings. Specifications
GOST 25697-83: Reinforced concrete slabs for balconies and loggias. General specifications
GOST 25820-2014: Lightweight aggregates concretes. Specifications
GOST 25912.0-91: Reinforced concrete slabs for aerodrome pavement
GOST 25912-2015: Prestressed reinforced concrete slabs for aerodrome pavement. Specifications
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 26992-86: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications
GOST 27215-2013: Reinforced concrete ribbed floor slabs of 400 mm depth for industrial buildings. Specifications
GOST 28042-2013: Reinforced concrete roofing slabs for industrial buildings. Specifications
GOST 28042-89: Reinforced concrete roofing for enterprises buildings. Specifications
GOST 28737-90: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications
GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31358-2007: Dry building flooring cement binder mixes. Specifications
GOST 31914-2012: High-strength heavy-weight and fine-grane concrete for situ-casting structures. Rules for control and quality assessment
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications
GOST 32499-2013: Reinforced concrete multihollow slabs for floors in buildings for span to 9 m stand moulding. Specifications
GOST 32803-2014: Self-stressing concrete. General specifications
GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements
GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods
GOST 32956-2014: Public roads. Trays for road drainage. Methods of control
GOST 32962-2014: Automobile roads of general use. Kerb units. Control methods
GOST 33126-2014: Expanded clay concrete blocs. Specifications
GOST 33146-2014: Automobile roads of general use. Pipes for road culvert. Control methods
GOST 33147-2014: Automobile roads of general use. Reinforced concrete slabs. Methods of testing
GOST 379-2015: Silicate bricks, stones, blocks and partition blocks. General specifications
GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications
GOST 6785-80: Reinforced concrete window boards. Specifications
GOST 6786-80: Reinforced concrete parapet slabs for production buildings. Specifications
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 8020-90: Concrete and reinforced concrete structures for sewage, water and gas supply pipeline manholes. Technical specifications.
GOST 948-84: Reinforced concrete lintels for brick wall buildings. Specifications
GOST 9561-91: Reinforced concrete multihollow panels for floors in buildings. Specifications
GOST 9574-90: Gypsum concrete panels for partitions. Specifications
GOST 9818-2015: Reinforced concrete flights of steps and stair landings. General specifications
GOST 9818-85: Reinforced concrete flights of steps and stair landings. Specification
GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 53231-2008: Concretes. Rules for control and assessment of strength
GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications
GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements
GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements
GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual AV-22-r: Guidelines for technical diagnostics of road tunnels
Manual for MGSN 2.07-01: Inspection and monitoring during the construction and reconstruction of buildings and underground structures
Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities
MDS 11-17.2004: Rules for the inspection of buildings, structures and complexes for liturgical and auxiliary purposes
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work
MDS 12-52.2009: In situ pile construction
MDS 12-65.2014: Project production work. Concreting of reinforced concrete structures of a building (structure) using concrete pumps
MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide
MDS 13-24.2010: Recommendations on the rules of geotechnical support of high-rise construction and adjacent space
MI 2016-03: GSE. The strength of concrete in structures and products. Methods of measurement in situ testing method of digging anchor
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
MRR 3.2.84-14: The collection of basic prices for work on the inspection of the technical condition of bridge structures, carried out with the involvement of the budget of the city of Moscow
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.023-2012: Recommendations for the use of fast-hardening materials for the repair of cement concrete pavements
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
ODM 218.3.008-2011: Recommendations for monitoring and inspection of retaining walls and retaining structures on landslide roads
ODM 218.3.012-2011: Cements for concrete coatings and road foundations
ODM 218.3.015-2011: Guidelines for the construction of cement concrete pavements in sliding forms
ODM 218.3.027-2013: Recommendations for the use of fabric composite materials in the repair of reinforced concrete structures of bridge structures
ODM 218.3.028-2013: Guidelines for the repair and maintenance of cement concrete pavements of roads
ODM 218.3.037-2014: Recommendations for monitoring the strength of cement concrete pavements and foundations of roads by sample
ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways
ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete
ODM 218.4.001-2008: Guidelines for the organization of inspection and testing of bridge structures on highways
ODM 218.4.002-2008: Guidelines for monitoring the status of existing bridge structures
OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments
OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications
OST 35-26.0-86: Ceramsite concrete room units for transport construction. General technical requirements.
RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure
RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases
RD 03-420-01: Guidelines for Inspection of Reinforced Concrete Tanks for Petroleum and Petroleum Products
RD 153-34.0-21.529-98: Method for Inspection of Reinforced Concrete Tanks for Liquid Fuel Storage
RD 153-34.1-21.324-98: Method for Inspection of Wall Enclosures of Buildings and Structures at Thermal Power Stations
RD 153-34.1-21.326-2001: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 1: Reinforced Concrete and Concrete Structures
RD 153-34.1-21.523-99: Guidelines for Operation of Reinforced Concrete and Brick Smokestacks and Gas Flues at Thermal Power Stations
RD 153-34.2-31.604-2002: Recommendations on technological issues of repair and reconstruction of the chambers of impellers of hydraulic units in order to increase their operational reliability
RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 31.31.38-86: Instructions for strengthening and reconstruction of mooring facilities.
RD 34.21.323-95: Procedural Guidelines for Inspection of Foundations Of Turbine Generator Units
RD 34.21.363-95: Procedural Guidelines for Inspection of Production Buildings and Structures at Thermal Power Plants Under Rehabilitation
RD 34.21.621-95: Guidelines for straightening crane tracks in the main buildings of thermal power plants
RD 34.21.622-96: Procedural Guidelines for Inspection of Roof Structures of Main Buildings of Thermal Power Stations
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2
RD EO 1.1.2.05.0697-2006: Guide to the construction and commissioning of reinforced concrete tower cooling towers of nuclear power plants
RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants
RD-15.01.07: Collection of prices for the main types of work carried out during the scientific and technical support of construction
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
R-NP SRO SSK 02-2015: Recommendations for concrete works in winter period
RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures
RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet
RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities
SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SO 34.21.343-2005: Rules for assessing the physicomechanical characteristics of concrete in hydraulic structures in use
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
SP 164.1325800.2014: Strengthening of reinforced concrete structures by FRP composites. Rules for design
SP 52-103-2007: Reinforced concrete monolithic building structures
SP 52-104-2006: Steel fibre reineorced concrete structures
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 78.13330.2012: Automobile roads
ST RK 1409-2005: Reinforced concrete road signs supports. Specification
STB 1081-97: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Technical conditions
ST-NP SRO SSK-03-2013: Rules for monitoring and assessing the strength of concrete in monolithic structures
ST-NP SRO SSK-04-2013: Temperature-strength control of concrete during the construction of monolithic structures in the winter
STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization
Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement
TR 141-03: Technical recommendations on the construction technology of collector tunnels without secondary lining
TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow
TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab
TU 5831-001-54735376-2004: Specifications. Three-layer reinforced concrete panels with flexible fiberglass connections for exterior walls of Styrod system buildings
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
TU 67-1003-88: Lattice arched beams prestressed with a span of 12 m
VSN 31-83: Execution Requirements for Concrete Work for Construction of Hydraulic Structures
VSN 36-86: Installation of Lining in Underground Hydraulic Structures Constructed in Rocky Permafrost Soils
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSN-1-90: Technological rules for the manufacture of centrifuged racks of contact network supports, communication lines and self-locking
VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements
VSP 32-02-03 MO RF: Rules for the production and acceptance of work in the repair of rigid airfield pavements
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.