Nondestructive testing. Welded joints. Radiography method
Контроль неразрушающий Соединения сварные Радиографический метод
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)
The standard establishes a method of radiographic inspection of welded joints from metals and their alloys, made by fusion welding, with the thickness of elements to be welded from 1 to 400 mm, using x-ray, gamma and bremsstrahlung radiation and radiographic film.
Стандарт устанавливает метод радиографического контроля сварных соединений из металлов и их сплавов, выполненных сваркой плавлением, с толщиной свариваемых элементов от 1 до 400 мм, с применением рентгеновского, гамма- и тормозного излучений и радиографической пленки.
Format: Electronic (pdf/doc)
Page Count: 32
Approved: USSR State Committee for Standards,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
25 Mechanical Engineering »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding regulations »
Non-destructive control »
Welding regulations »
Welding regulations »
Main materials »
Non-ferrous metals »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
Standards for pipe fittings (TPA) »
10. Production »
10.6 Non-destructive testing »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.40 Welds and welding »
National standards »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.40 Welds and welding »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V09 Test methods. Packaging. Marking »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
One-piece connections (welding, riveting, soldering, etc.) »
As a Replacement Of:
GOST 7512-75: Non-destructive check. Normal and high precision renewable jig bushes. Radiographic method
The Document References:
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 15843-79: Accessories for industrial radiography. Main dimensions
GOST 20426-82: Radiation methods of defectoscopy
GOST 23734-79: Industrial tractors. Test methods
GOST 23764-79: Gamma-defectoscopes. General technical specifications
GOST 24034-80: Radiation non-destructive testing. Terms and definitions
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
OSP-72/87: Basic sanitary rules for working with radioactive substances and other sources of ionizing radiation
The Document is Referenced By:
DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants
GOST 10037-83: Autoclaves for building industry
GOST 10580-74: Foundry equipment. General specifications
GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications
GOST 11004-84: Principal ventilation mine blowers
GOST 12367-85: Tube mills of grinding units. General technical specifications
GOST 1561-75: Air reservoirs for railway car automatic brakes. Specifications
GOST 15860-84: Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1.6 MPa.
GOST 17366-80: Welded thick-walled steel barrels for chemical products
GOST 17441-84: Electrical contact connections. Acceptance and methods of tests
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 20426-82: Radiation methods of defectoscopy
GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods
GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications
GOST 22045-89: Overhead travelling single-beam cranes. Specifications
GOST 22584-96: Electric rope hoists
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 23118-2012: Building steel structures. General specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export
GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications
GOST 23691-79: Joints of tubes with tube-plates and collectors of heat exchangers. Compression of tubes by sources of impulse pressure. General
GOST 25997-83: Fusion welding of metals. Statistical quality evaluation by non-destructive testing results
GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications
GOST 26582-85: Food (manufacturing) industry machines and equipment
GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications
GOST 27614-2016: Cement carriers. General specifications
GOST 27614-93: Cement carriers
GOST 27947-88: Non-destructive testing. Tv radiographic method. General requirements
GOST 28277-89: Non-destructive testing. Welded joints. Electroradiography method. General requirements
GOST 28433-90: Retrievers
GOST 28434-90: Overhead travelling stacker cranes
GOST 29025-91: Non-destructive testing. X-ray television flaw detectors with X-ray electronic optical transducers electric radiographic flaw detectors. General technical requirements
GOST 30243.1-97: Open hopper wagons of 1520 mm gauge for the loose materials. General specifications
GOST 30767-2002: Gas lift well use equipment. Safety requirements and test methods
GOST 30768-2001: Control head oil field equipment. Test methods
GOST 30776-2002: Oil field mobile pumping units. General specifications
GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines
GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding
GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing
GOST 31831-2012: Centrifugal dust collectors. Safety requirement and methods of testing
GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods
GOST 31837-2012: Abcorptive gas purifiers. Safety requirements and test methods
GOST 3242-79: Welded joints
GOST 32504-2013: Petroleum and natural gas industries. Downhole equipment. Sand screens liquid centrifugal separators. General technical requirements
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements
GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications
GOST 33005-2014: Oil and gas industry. Drilling and production equipment. Connections of marine drilling risers. General specifications
GOST 33146-2014: Automobile roads of general use. Pipes for road culvert. Control methods
GOST 33172-2014: Electric chain hoists. Safety requirements.
GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications
GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements
GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 34070-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Technical requirements
GOST 34181-2017: Trunk pipelines for oil and oil products transportation. Technical diagnosis. Main principles
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications
GOST 34587-2019: Hoisting cranes. Metal constructions. Manufacturing requirements
GOST 34601-2019: Automobile vehicles powered by liquefied natural gas. Cryogenic power systems. Technical requirements and test methods
GOST 34670-2020: Gas distribution systems. Gas reduction points. Basic Provisions
GOST 7075-80: Manual Traveling Underrunning Cranes Specifications
GOST 7890-84: Travelling single-girder suspended cranes. Specifications
GOST 7890-93: Travelling single girder suspended cranes. Specifications
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST R 50.05.07-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Radiographic examination
GOST R 50059-92: Travelling single-girder suspended cranes. Specifications
GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating
GOST R 51127-98: Liquid filters periodic action, working under pressure. Safety requirements and test methods
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 51365-99: Control head oil field equipment. General specifications
GOST R 51562-2000: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
GOST R 51707-2001: Electrostatic precipitators. Safety requirement and methods of testing
GOST R 51708-2001: Centrifugal dust collectors. Safety requirement and methods of testing
GOST R 51878-2002: Adsorptive gas cleaners. Safety requirements and test methods
GOST R 52220-2004: Monorail transport system electrical rolling stock. General safety requirements
GOST R 52232-2004: Light rail cars. General specifications
GOST R 52264-2004: Pressure diving chambers. General specifications
GOST R 52400-2005: Air reservoirs for railway brakes. General specifications
GOST R 52445-2005: Absorptive gas purifiers. Safety requirements and test methods
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control
GOST R 53682-2009: Fired heaters for refineries. General technical requirements
GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST R 55085-2012: Cylinders steel welded on pressure 1,6 MPа for liquefied hydrocarbon gas, used as motor fuel on car transport facility. Specifications
GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST R 55249-2012: Air transport. Airports. Technical means for screening. General technical requirements
GOST R 55850-2013: Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 2. Surface-drive systems. General technical requirements
GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification
GOST R 56467-2015: Space systems. Powder metal and metal composite materials. Classification. Nomenclature of indices
GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R 58423-2019: Gas pressure regulators for inlet pressure not higher than 10 MPa
GOST R 58623-2019: The main pipeline transport of oil and oil products. Vertical cylindrical steel tanks. Technical Operation Rules
GOST R 58778-2019: Gas distribution systems. Gas distribution networks and gas consumption. Category 1a high pressure gas pipelines
I3-94: Instructions for diagnosing the technical condition of tanks of liquefied gas installations
IG-93: Instructions for use, technical supervision, methods of audit, rejection and repair of wet gas tanks
ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries
ITNJe-93: Instruction on technical supervision and operation of pressure vessels not covered by the Rules of Gosgortechnadzor
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 3.05.02-88: Manual on technology and organization of the construction of pipelines for gas supply systems in rural areas of the Non-chernozem zone of the RSFSR
Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction
MDK 4-04.2002: Model Guidelines for Operation of Hot Water Storage Tanks in Public Piped Heat Supply Systems
MDS 12-31.2007: Guidelines for technical certification of removable load-handling devices
MDS 53-1.2001: Recommended Practice for Installation of Steel Structural Elements
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
MSN 42-01-2011: Gas distribution systems
MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life
OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments
OST 102-51-85: Non-destructive testing. Welded pipe joints. Radiographic method.
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 108.030.30-79: Stationary structural steel boilers. General specifications.
OST 24.050.34-84: Wagon steel structures design and production. Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-01-1183-82: Aluminium vessels and devices. General technical specifications.
OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.
OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.
OST 26-11-10-93: Welded joints. X-Ray TV testing method.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements
OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.
OST 36-26-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (≈ 25 kg/cm2). General technical requirements.
OST 36-49-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Technical conditions.
OST 36-58-81: Steel building structures. Welding. Basic requirements.
OST 36-60-81: Welding at installation of steel building constructions. Main provisions.
OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.
OST 95 10575-2002: Equipment and pipelines of separation plants. Weld joints and deposits. Control rules
OST 95 227-92: Non-standardized products of general machine-building applications. General technical requirements.
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-110-96: Safety regulations on pressurized storage of liquefied petroleum gas and highly inflammable liquids
PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding
PB 03-278-99: Process rules for qualification tests of welders and welding production specialists
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 08-258-98: Rules for the Construction and Safe Operation of the Main Pipeline for the Transportation of Liquid Ammonia
PB 10-11-92: Installation and Safe Operation Requirements for Hoists (Hoisting Towers)
PB 10-14-92: Codes for installation and safe operation of lifting cranes
PB 10-157-97: Installation and Safe Operation Requirements for Pipe-Laying Machine Safety
PB 10-256-98: Regulations on design and safe operation of hoists (derricks)
PB 10-257-98: Rules for the installation and safe operation of crane manipulators
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
PB 10-77-94: Installation and Safe Operation Requirements for Escalators
PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys
PNAE G-10-032-92: Requirements for welding seal element control of nuclear plant confining safety systems
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
PNAE G-7-017-89: Unified technique of inspection of base materials (semifinished products), welded joints and deposits of equipment and pipelines of atomic power plants. Ultrasonic inspection
PNAE G-7-023-90: Equipment and pipelines of nuclear power units. Welded joints of aluminium alloys. Control rules
PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters
R 265-77: Guidance on the technology and organization of construction of trunk pipelines with a diameter of 1220-1420 mm by the flow method of factory-insulated pipes
R 498-83: Recommendations for the production of works during the construction of trunk pipelines with a diameter of 1220-1420 mm using a flow method of non-lifting installation
R Gazprom: Temporary technical requirements for equipment for opening pipelines
RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.
RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure
RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.
RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.
RD 12-253-98: Procedural Guidelines for Inspection of Gas Supply Facilities
RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines
RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 153-34.1-21.530-99: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 2: Metal Structures
RD 153-39.1-059-00: Technique of technical diagnostics of gas control points
RD 153-39.4-056-00: Main crude pipeline. Operations rules.
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD 22-207-88: Lifting machines. General requirements and production standards
RD 22-28-36-01: Lifting cranes. Typical program and test procedure. Standard testing programs and procedures.
RD 22-326-97: Self-propelled jib cranes and loader cranes. Overhaul. General technical conditions
RD 24.020.11-93: Welded joints of stationary steam, gas and hydraulic turbines. Testing rules and quality evaluation standards.
RD 24.090.97-98: Materials handling equipment. Requirements for construction, repair and reconstruction of steel structures of cranes.
RD 24.942.02-90: Electroslag welding of chemical and petroequipment from low-alloyed and heat-resistant steels
RD 26.260.004-91: Procedural Guidelines. Prediction of Remaining Service Life of Equipment According to the Change in its Operational Parameters During Operation
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities
RD 26.260.225-2001: Bodies of cylindrical vessels and devices. Technology, quality assurance
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
RD 26-17-78-87: Pulsed-arc welding of chemical oil equipment from stainless steels with a consumable electrode in argon
RD 2-97: Regulations on the system for the technical diagnosis of autoclaves in the production of building materials
RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 31.44.06-89: Low loader semi-trailers. Repair Specifications
RD 31.52.23-89: Ship diesel engines. Restoring cylinder covers using welding. Typical Processes
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34 10.068-91: Welded joints of heat power plant equipment. Radiographic control.
RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)
RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities
RD 34.17.310-96: Welding, Heat Treatment, and Inspection During In-Service Repair of Welded Joints in Boiler Tubing Systems and Steam Lines
RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements
RD 34.17.435-95: Methodological instructions. Technical diagnostics of boilers with working pressure up to 4.0 MPa inclusive.
RD 34.21.526-95: Model Guidelines for Operation of Metal Tanks for Storage for Liquid Fuel and Hot Water
RD 34.39.501: Model Guidelines for Operation, Repair, and Inspection of System Water Station Piping Systems
RD 34.40.601-97: Procedural Guidelines for Inspection of Hot Water Storage Tanks
RD 34-10.030-89: Rules for quality control of welded joints of pipelines of nuclear power plants
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 3689-001-00220302/31-2004: Radiant pipes and components for reaction pipe furnaces. Requirements for design, production and delivery.
RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
RD EO 188.8.131.52.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants
RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications
RD ROSEK 04-010-98: Guidelines for the technical diagnosis and extension of the service life of pressure chambers
RD ROSEK-01-002-96: Hoisting machines. Metal structures. Radiation control. Key Points
RD RosJeK 05-014-98: Guidelines for expert examination of pipelines of steam and hot water of category IV, supervised by the Gosgortekhnadzor of Russia
RD RosJeK 10-KM-03: Rules for the design, construction and manufacture of hoisting cranes
RD RosJeK 10-KR-01: Rules for the design, construction and manufacture of hoisting cranes
RD RosJeK 10-PV-02: Rules for the design, construction and manufacture of hoists (towers)
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
Resolution: Rules for the design and safe operation of steam and hot water boilers
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
RTM 26-07-133-93: Pipeline fittings. Welding and a building-up of details from titanic alloys. Technical requirements and quality control.
RTM 36.16-89: Guidelines for Application of the X-Ray Video Method for Inspection of Welded Joints in Rolled Stock for Tanks
RTM 36.2-87: Guide to the Use of Photographic Paper and Magnifying Screens for Quality Control of Welded Joints in Organizations Administered by USSR Minmontzhspetststroy
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
SDOS-01-2008: Methodical recommendations about on the order of radiation control of technical devices and structures applied and operated on hazardous production objects
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.05.03-85: Heat networks
SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing
SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)
SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.
SNiP III-29-76: Gas supply. Internal devices. External networks and facilities
SP 105-34-96: Code of regulations on construction of trunk gas pipelines. Welding works and quality control of welding joints
SP 129.13330.2019: External networks and water supply and sewerage facilities
SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines
SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling
SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines
SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation
SP 378.1325800.2017: Offshore pipelines. Design and construction rules
SP 406.1325800.2018: Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation
SP 46.13330.2012: Bridges and pipes
SP 53-101-98: Manufacturing and quality control of steel structures for construction
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 86.13330.2014: Main (Trunk) pipelines
ST CKBA 125-2020: Pipe fittings. Types of control and testing
ST RK 1358-2005: Pressure vessels. Requirements for welding steels
ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure
ST TsKBA 013-2007: Pipe fittings. Welding of fittings to the pipeline. Technical requirements
ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments
ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STB 1428-2003: Non-destructive testing. Welded connections of pipes and steel structures. Radiographic method
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TR 94.13-01: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 13: Installation Quality Control of Building Services Systems
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)
TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa
TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines
TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist
TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions
TU 34 10.10055-97: Vertical cylindrical steel tanks. Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 3615-018-00217320-2006: Spherical tanks. Technical specifications
TU 3615-132-00220302-2008: Ball tanks for liquefied petroleum gases. Specifications
TU 36-26-11-4-89: Steel building construction, vertical cylindrical tanks for oil and petroleum products with a volume of 100 to 50,000 m3. Technical conditions
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
VPNRM 484-86: Industry-Specific Specified Quantity Allowances for Materials Used in Installation Practices and Military Construction. Quality Control and Thermal Treatment of Welded Joints
VSN 005-88: Construction of field steel pipelines Technology and arrangement
VSN 006-89: Construction Of Main And Field Pipelines Welding
VSN 012-88: Main pipeline and flowline construction. Quality control and commissioning of works
VSN 171-84: Instructions on welding technology and quality control of welded joints of field pipelines
VSN 2-148-82: Instructions on the procedure for marking radiographic images and drawing up conclusions on the quality of welding
VSN 311-89: Erection of Upright Cylindrical Steel Tanks With Capacities of 100 to 50,000 Cubic Meters for Storage of Petroleum and Petroleum Product
VSN 347-75: Model Guidelines for Occupational Safety in the Fabrication of Steel Structures
VSN 362-87: Disinfections and Etching of Pipelines
VSN 39-87: Ordinance for Planned Preventive Maintenance and Operation of Production Equipment at Construction Industry Companies Administered by the USSR Gosagprom. Part 1
Customers Who Viewed This Item Also Viewed:
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Foundation bolts. Structure and dimensions
Pipeline valves. Leakage rates of valves
Steel welded vessels and apparatus. General technical conditions
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Billet of rotor shafts and rings of turbine generators
Steel building structures. General specifications
Fencing constructions for translucent buildings and structures. Design rules
Electromagnetic compatibility of multimedia equipment. Emission requirements
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Hot-rolled sheet. Range
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Reinforcing rolled products for reinforced concrete constructions. Specifications
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Unified system for design documentation. Exploitative documents
Hexagon head bolts. Product grades A and B
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.