imgalt

GOST 12.3.028-82

ГОСТ 12.3.028-82

Processes of treatment materials by abrasive and borazon tools

Система стандартов безопасности труда. Процессы обработки абразивным и эльборовым инструментом. Требования безопасности

Status: Not effective - Canceled in the Russian Federation. IUS 2-2009

The standard applies to abrasive and elborovy tools of all kinds and establishes safety requirements when working with specified tools with working speeds from 15 to 120 m

Стандарт распространяется на абразивный и эльборовый инструмент всех видов и устанавливает требования безопасности при работе указанным инструментами с рабочими скоростями от 15 до 120 м/с. Стандарт не распространяется на полировальные круги, изготолвенные из текстильных, войлочных, кожаных, синтетических материалов, имеющих на поверхности слой шлифовального материала.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 3/4/1982

SKU: RUSS18591

Price: $234.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.3 Safety requirements of production processes »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.20 Surface Treatment »

National standards » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.20 Surface Treatment »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »


As a Replacement Of:

GOST 12.2.001-74: Occupational safety standards system. Abrasive tool. Rules and norms of safe work

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.009-99: Metal-working machines. General safety requirements

GOST 12.2.010-75: Occupational safety standards system. Pneumatic Hand Machines. General safety requirements

GOST 12.3.023-80: Diamond tools, treatment processes of materials

GOST 21963-2002: Grinding wheels for cutting-off. Specifications

GOST 2270-78: Abrasive tool. Main dimensions of fixing elements

GOST 2424-83: Grinding wheels

GOST 380-2005: Common quality carbon steel. Grades

GOST 380-94: Normal quality carbon steel

GOST 9347-74: Board for gaskets and gaskets cut of it. Specifications

The Document is Referenced By:

GOST 12.2.009-80: Metalworking machines

GOST 12.2.009-99: Metal-working machines. General safety requirements

GOST 12.2.010-75: Occupational safety standards system. Pneumatic Hand Machines. General safety requirements

GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements

GOST 12.2.046-80: Occupational safety standards system. Equipment for foundry production. Safety requirements

GOST 12.3.008-75: Production of metallic and non-metallic inorganic coatings

GOST 12.3.023-80: Diamond tools, treatment processes of materials

GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements

GOST 12.3.027-2004: Foundry work. Safety requirements

GOST 16115-88: Diamond segment cut-off wheels of 1a1rss/c1 and1a1rss/c2 forms

GOST 21963-2002: Grinding wheels for cutting-off. Specifications

GOST 21963-82: Cutoff wheels

GOST 22776-77: Products, made of the abrasive paper

GOST 24106-80: Nitride bore grinding wheels

GOST 2424-83: Grinding wheels

GOST 2447-82: Mounted grinding wheels

GOST 24897-81: Solid magnetic deformed materials. Marks

GOST 30513-97: Abrasive and diamond tools. Test methods for safety

GOST 30676-2000: Circular grinding machines. Flanges for mounting of grinding wheels. Construction and dimensions

GOST 30677-2000: Circular grinding machines. Shields. Types and main dimensions

GOST 32694-2014: Plates for spike fastening of railway. Specifications

GOST 8692-88: Fiber grinding wheels

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST R 50786-2012: Metal-cutting household machine-tools. Safety requirements

GOST R 50786-95: Metal-cutting machine tools household. Safety requirements

IOT 11233753-001-2007: Instructions for labor protection for the installer of instruments and equipment for automatic control, regulation and control

Manual: Manual for impulse and low consumption fire extinguishing systems

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MRO 2-99: The method of calculating the amount of waste. Scrap abrasive products, metal abrasive dust

MU OT RM 02-99: Assessment of the safety of workplaces for their certification of working conditions

ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)

ONTP 14-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises (refinement of ONTP-14-93). Mechanical processing assembly shops

ONTP 1-85/Minstrojdormash: All-Union norms of technological design of engineering enterprises, instrument making metallo-processing. Metalwork shops (Stocking and welding production)

OST 108.030.30-79: Stationary structural steel boilers. General specifications.

OST 36-100.2.03-84: Occupational safety standards system. Labour saving tools. Installation tools and devices. General safety and ergonomics requirements.

OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.

OST 5 9137-83: Welding of casting defects in steel and cast iron. Technical requirements

PB: Safety regulations and industrial sanitation for loading and unloading operations on railway transport

PB: Safety regulations and industrial sanitation for the repair and maintenance of railway tracks and structures

POT R M-002-97: Intersectoral rules on labor protection in foundry

POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals

POT R M-006-97: Intersectoral labor protection rules for cold metal processing

POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products

POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings

POT R M-027-2003: Intersectoral rules on labor protection in road transport

POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars

POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry

POT R O-001-2002: Rules on labor protection for printing organizations

POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry

POT R O-14000-003-98: Rules for labor protection in the manufacture of boiler work and metal structures

POT R O-200-01-95: Rules on labor protection in automobile transport

POT R O-32-CV-400-96: Labor protection rules for the maintenance and repair of freight cars and refrigerated rolling stock

POT R O-32-TsT-668-99: Rules for labor protection during maintenance and current repair of traction rolling stock and cranes on the railway

POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery

POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport

POT RO-14000-002-98: Ordinance on Safety Assurance for Process Equipment

POT RO-32-TsP-652-99: Rules for labor protection during the maintenance and repair of railway tracks and structures

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface

RD 31.55.03.07-86: Restoration of cast-iron diesel pistons D100 surfacing. Typical Processes

RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.

RD 34.03.204: Safety rules when working with tools and accessories

Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)

ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements

TU 0921-057-01124328-98: New welded railway rails. Technical conditions

TU 0921-077-01124328-99: Old-fashioned repaired welded rails

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English
Price: $398.00
imgalt
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English
Price: $98.48
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $282.00
imgalt
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English
Price: $96.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Rails of types P38 and P42. Technical conditions
Language: English
Price: $109.00
imgalt
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $282.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!