GOST 7350-77

ГОСТ 7350-77

Plate, corrosion-resistant, heat-resistant, and high-temperature steel

Сталь толстолистовая коррозионно-стойкая, жаростойкая и жаропрочная

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to plate, hot-rolled and cold-rolled corrosion-resistant, heat-resistant and heat-resistant steel produced in sheets.

Стандарт распространяется на толстолистовую, горячекатаную и холоднокатаную коррозионностойкую, жаростойкую и жаропрочную сталь, изготовляемую в листах.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: State Committee of Standards of the Council of Ministers of the USSR, 7/21/1977

SKU: RUSS18660

Price: $87.12

English keywords: high grade steel;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V33 Sheets and Stripes »


As a Replacement Of:

GOST 7350-66: High-quality thick stainless steel and heat-proof steel. Technical requirements

The Document References:

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 14019-2003: Metallic materials. Bend test method

GOST 1497-84: Metals. Methods of tension test

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 19904-90: Cold-rolled steel sheets. Dimensions

GOST 20072-74: Heat-resistant steel

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

The Document is Referenced By:

ATK 24.218.04-90: Liquid mesh filters for pipelines. Design, dimensions and dimensions

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications

GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions

GOST 14245-79: Heat exchangers shell-and-tube with U-shaped tubes. Basic parameters and dimensions

GOST 15119-79: Shell-and-tube evaporators with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions

GOST 15120-79: Shell-and-tube chillers with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions

GOST 15121-79: Shell-and-tube condensers with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions

GOST 15518-83: Plated heat exchangers. Type, basic parameters and dimensions. Technical requirements

GOST 23309-78: Boxes radiation-protective. General technical requirements

GOST 23702-85: Non-destructive check. Ultrasonic transducers. Methods basic parameters measurement

GOST 23702-90: Non-destructive testing. Ultrasonic transducers. Test methods

GOST 23762-79: Shell-and-tube heat exchangers for high temperatures and pressures. Basic parameters and dimensions

GOST 26155-84: Barrels from corrosion-resistant steel

GOST 28759.8-90: Metal gaskets of octagonal cross-section

GOST 30765-2001: Metal transport packagings. General specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32020-2012: Elastomeric bearings for bridge building. Specifications

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 34205-2017: Insulators sectional for the contact network of railways. General technical conditions

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking

GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications

GOST R 52153-2003: Radiation-protective boxes. General specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54908-2012: Heat-resistant steel metal products. Specifications

GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications

GOST R 55064-2012: Sodium hydroxide for industrial use. Specifications

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements

GOST R 55649-2013: Section insulation for catenary of railways. Specifications

GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

L8-508-524: Supports and suspensions of pipelines Dn less than 89 mm. Working drawings

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts

OST 108.030.45-82: Tubular air heaters for stationary boilers. General Specifications.

OST 108.275.39-80: Bodies of pipe supports of thermal and nuclear power plants. Design and dimensions.

OST 108.275.40-80: Bodies of pipe supports of thermal and nuclear power plants. Design and dimensions.

OST 153-34.0-1002-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Gasket Design and dimensions

OST 153-34.0-1002-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The laying. Design and dimensions.

OST 153-34.0-980-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Pillows and stops. Design and dimensions

OST 153-34.0-980-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Pads and fixed stops. Design and dimensions.

OST 153-34.0-986-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit clamp for horizontal pipelines. Design and dimensions

OST 153-34.0-986-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Saddle block of a hang for horizontal pipelines. Design and dimensions.

OST 153-34.0-989-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit clamp for vertical pipelines. Design and dimensions

OST 153-34.0-989-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Saddle block of a hang for vertical pipelines. Design and dimensions.

OST 153-34.0-994-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Eye. Design and dimensions

OST 153-34.0-994-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The lug. Design and dimensions.

OST 153-34.0-997-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Cover plate. Design and dimensions

OST 153-34.0-997-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The lining pad. Design and dimensions.

OST 153-34.0-998-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Fin. Design and dimensions

OST 153-34.0-998-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The stud. Design and dimensions.

OST 24.030.10: Vessels and apparatus for water treatment plants. General technical conditions

OST 24.125.20-89: Units with diaphragms for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-01-342-71: Parts of pipelines. Viewing portholes with flat glass. Design and dimensions

OST 26-02-601-72: Support lattices under ring packing. Main dimensions and technical requirements.

OST 26-02-602-72: Supporting beams for ring fillings. Design, main dimensions and technical requirements.

OST 26-04-1037-74: Holders and fasteners of cold pipes to each other. Construction and dimensions.

OST 26-04-1040-74: Support for t warm-air pipelines with diameter from 100 to 325 mm. Design and dimensions.

OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-11-04-84: Steel vessels and devices. Allowable stress.

OST 26-17-01-83: Heat exchangers and standard air cooling devices. Technical requirements to a bead forming with torque limiting.

OST 26-18-3-86: liquid mesh filter for piping. Design, parameters and dimensions.

OST 26-18-6-88: Vessels, Apparatus and Process Units, Operating at Temperature Below Minus 70°C. Technical requirements

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 34-10-424-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Welded sheet transitions. Construction and dimensions.

OST 34-10-425-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges. Construction and dimensions.

OST 34-10-426-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges to webbings. Construction and dimensions.

OST 34-10-428-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flanged plugs with a joggle. Construction and dimensions.

OST 34-10-511-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Transitional welded tees.

OST 34-10-512-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Internal flush-jointed welded tees with a cover plate.

OST 34-10-733-93: Lug with lining. Design and dimensions.

OST 34-10-734-93: Fin with cover plate. Design and dimensions.

OST 34-10-735-93: Clip for horizontal pipelines. Design and dimensions.

OST 34-10-736-93: Clip for vertical pipelines. Design and dimensions.

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNST 248-2017: On-board cryogenic tanks for locomotives on liquefied natural gas. General specifications

R 585-85: Recommendations for the design of gas pipelines transporting cooled gas

RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 153-34.1-24.505-98: Recommended Practice for Selection of Injectors for Supplying Water Spray in Fuel Pulverizing Systems in Order to Quickly Reduce the Temperature of the Dust-Gas-Air Mixture in Emergencies

RD 26-02-63-87: Technical requirements for designing and manufacturing of vessels, vehicles and technological blocks installations of oil and gas, operating environments, causing hydrogen sulphide stress corrosion cracking.

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 34.40.201-91: Procedural Guidelines for Modernization of Atmospheric-Pressure and Elevated-Pressure Deaeration Columns

RD 3689-001-00220302/31-2004: Radiant pipes and components for reaction pipe furnaces. Requirements for design, production and delivery.

RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements

RTM 108.020.126-80: Method of calculation and design of oil coolers for oil supply systems of turbine units

RTM 108.020.39-81: Sealed oil coolers for steam and gas turbines of thermal power plants. General technical requirements

RTM 26 123-73: Calculation of forces on the rolls of three- and four-roll plate bending machines

ST RK 1358-2005: Pressure vessels. Requirements for welding steels

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications

TR 88-98: Technical recommendations on the installation technology of polymer concrete pipes for microtunnel laying of sewers with an internal diameter of 300-1200 mm

TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing

TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions

TU 26-02-1158-95: Horizontal air coolers

TU 26-18-38-90: Parts of seamless welded pipelines from steel grades 15Х5М, 12Х1МФ, 12Х18Н10Т, 08Х22Н6Т

TU 3612-013-00220302-99: Shell-and-tube heat exchangers for special purposes. Evaporators with steam space and tube bundles to them

TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges

ODM 218.2.076-2019: Recommendations on the use of composite structures for areas with extreme temperature conditions (below minus 40 degrees Celsius and above plus 40 degrees Celsius)

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Aviation gas turbine fuels. Method for determining thermal oxidative stability
Language: English
Price: $473.36
Hazard classification of chemical products. General requirements
Language: English
Price: $356.40
Warning labeling of chemical products. General requirements
Language: English
Price: $613.80
Safety data sheet for chemical products. General requirements
Language: English
Price: $121.77
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!