imgalt

GOST 8479-70

ГОСТ 8479-70

Structural carbon and alloy steel forgings

Поковки из конструкционной углеродистой и легированной стали

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to forgings of general purpose with a diameter of up to 800 mm from structural carbon, low alloyed and alloyed steel, produced by forging and hot stamping. The standard establishes groups of forgings and basic technical requirements for the acceptance and delivery of them. The standard does not replace the existing standards and technical conditions for certain types of forgings, which are subject to special requirements for the production method, surface quality, the use of special types of processing terms, etc.

Стандарт распространяется на поковки общего назначения диаметром до 800 мм из конструкционной углеродистой, низколегированной и легированной стали, изготовляемые ковкой и горячей штамповкой. Стандарт устанавливает группы поковок и основные технические требования к приемке и поставке их. Стандарт не заменяет действующие стандарты и технические условия на отдельные виды поковок, к которым предъявляются особые требования по способу производства, качеству поверхности, применению специальных видов терминов обработки т. п.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 1/15/1970

SKU: RUSS18664

Price: $79.00

English keywords: cast iron and steel forgings;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Standards for pipe fittings (TPA) » 10. Production » 10.2 Billets (forgings, stampings, rolling, castings, etc.) »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.1 Metals »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.85 Cast iron and steel forgings »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.85 Cast iron and steel forgings »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V03 Metal forming. Forgings »

National Standards for OKSTU » PRODUCTS FOR GENERAL ENGINEERING APPLICATIONS » Forgings and stampings from ferrous metals »


As a Replacement Of:

GOST 8479-57: Structural carbon and alloy steel forgings. Classification and technical requirements

The Document References:

GOST 1050-74: High-grade constructional carbon steel

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12344-78: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12345-80: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12361-82: Alloyed and high-alloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 1497-73: Metals. Tensile test methods

GOST 1497-84: Metals. Methods of tension test

GOST 18895-81: Steel. Method of photoelectric spectral analysis

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19281-73: Low alloyed sorted and shaped steel

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 22536.0-77: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-77: Carbon steel and unalloyed cast iron. Methods for determining aluminum content

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-77: Carbon steel and unalloyed cast iron. Determination of titanium concentration

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-77: Carbon steel and unalloyed cast iron. Method of determination of vanadium content

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.13-77: Carbon steel and unalloyed cast iron. Methods of spectral analysis

GOST 22536.1-77: Carbon steel and unalloyed cast iron. Methods for determining the content of total carbon and graphite

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-77: Carbon steel and unalloyed cast iron. Sulphur content determination method

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-77: Carbon steel and unalloyed cast iron. Method for the determination of phosphorus content

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-77: Carbon steel and unalloyed cast iron. Method for the determination of silicon content

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-77: Carbon steel and unalloyed cast iron. Methods for determination of content

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-77: Carbon steel and unalloyed cast iron. Method for determination of arsenic content

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-77: Carbon steel and unalloyed cast iron. Methods for determination of chromium content

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-77: Carbon steel and unalloyed cast iron. Methods of the determination of capper content

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-77: Carbon steel and unalloyed cast iron. Methods for determination of nickel content

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 380-71: Common quality carbon steel. Grades

GOST 380-94: Normal quality carbon steel

GOST 4543-71: Structural alloyed steel

GOST 7062-79: Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances

GOST 7062-90: Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances

GOST 7505-74: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7829-70: Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

The Document is Referenced By:

GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications

ATK 24.218.01-90: Bosses, Plugs, and Gaskets. Design, Dimensions, and General Technical Specifications

ATK 24.218.04-90: Liquid mesh filters for pipelines. Design, dimensions and dimensions

ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

ATK 26-18-10-94: Devices for Installation of Temperature Measuring Devices for Use at Nominal Pressure from 0.6 to 16.0 MPa. Plugs. General Technical Requirements

GOST 10037-83: Autoclaves for building industry

GOST 10272-77: Double entry centrifugal pumps. Specification

GOST 10411-74: Axles for diesel locomotives of narrow gauge railways. Technical requirements

GOST 10465-74: Pivoted core bit tongs

GOST 10674-2022: Tank wagons. General specifications

GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications

GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions

GOST 10935-2019: Cargo freight cars. General specifications

GOST 10935-2022: Covered freight cars. General specifications

GOST 11042-90: Construction steel hammers. Specifications

GOST 11435-75: Blacksmith's hand and hammer tools. Technical requirements

GOST 12393-77: Fittings for overhead system of electric railways. General specifications

GOST 12778-67: Strengthened straps and supports. Technical requirements

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 13276-79: Overhead line hardware. General specifications

GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)

GOST 13556-91: Building tower pillars building tower pillars

GOST 14245-79: Heat exchangers shell-and-tube with U-shaped tubes. Basic parameters and dimensions

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 16162-78: Reducers of general usage. General specifications

GOST 16162-85: Standard reducers. General specifications

GOST 17166-71: Accessory tool for metal-cutting machines. General technical requirements

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 17411-72: Hydraulic gears. General technical requirements

GOST 1757-76: Hoes. Specification

GOST 18126-72: Bolts, studs and nuts with thread diameter over 48 mm. Specifications

GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications

GOST 18578-89: Builders axes. Specifications

GOST 19354-74: Shaft line flange joints. Construction and dimensions

GOST 19740-74: Vertical centrifugal pumps

GOST 20572-83: Two-screw pumps and pump units. Specification

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 20791-83: Centrifugal glandless electric pumps. Technical requirements

GOST 2105-75: Forged and swaged hooks. Technical requirements

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21546-88: Hammer dies for die forging

GOST 2224-93: Steel eye rings for wire cables

GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 22956-83: Chain slings, mechanized, for securing cargo on vehicles. Specification

GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage

GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications

GOST 23762-79: Shell-and-tube heat exchangers for high temperatures and pressures. Basic parameters and dimensions

GOST 24599-87: Rope grab buckets for bulk cargoes

GOST 25084-89: Universal dies with replaceable built-up tool sets

GOST 25496-82: Anchors with high holding power. Specifications

GOST 25573-82: Freight handling rope slings for construction

GOST 26546-85: Chain variators. General specifications

GOST 26686-2022: Flatcars. General specifications

GOST 26725-2022: Open wagons. General technical conditions

GOST 26957-86: Variator with wide angle belt pulleys. General specifications

GOST 26957-97: Variators with wide-angle belt pulleys. General specifications

GOST 28433-90: Retrievers

GOST 28434-90: Overhead travelling stacker cranes

GOST 30632-99: Brake block holder and key for 1520 mm main-line locomotives. General specifications

GOST 30765-2001: Metal transport packagings. General specifications

GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications

GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 30894-2003: Production well head equipment. General technical requirements

GOST 31.0151.01-90: Universal and special-purpose setters

GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 31.121.42-84: Elements and assemblies of universal built-up and re-adjustable equipment for metal-cutting machines

GOST 31.2031.02-91: Readjusted collapsible devices for part assembly under welding

GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31592-2012: Machine reducers. General specifications

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32216-2013: Special railway rolling stock. General technical requirements

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32578-2013: Cranes. Metal structures. Requirements for materials

GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements

GOST 32601-2022: Centrifugal pumps for oil, petrochemical and gas industry. General technical requirements

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 32885-2014: Automatic coupler model SA-3 and its components. Design and dimensions

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications

GOST 33796-2016: Railway multiple units. Durability and dynamics requirements

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34075-2017: Brake block holder and key for railway rolling stock. General specifications

GOST 34233.1-2017: Vessels and apparatus. Norms and methods of strength calculation. General requirements

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications

GOST 34625-2019: Gear lever brake traction rolling stock. General specifications

GOST 34697-2020: End and release valves. General specifications

GOST 34939-2023: Locomotives. Requirements for strength and dynamic qualities

GOST 5.1553-72: Pulse full height angular steel valve Di 20 mm with electromagnetic drive. Quality requirements for certified products

GOST 5.403-70: Steel-teeming ladles. Quality requirements for certified products

GOST 5006-83: Toothed clutches. Specifications

GOST 5332-75: Rollers and spacings of roll tables of rolling mills. General specifications

GOST 5465-75: Ball joints for floating and soil pressure pipelines

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5761-74: Valves for nominal pressure

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications

GOST 5973-2022: Dumper cars. General specifications

GOST 6490-2017: Line suspension disk insulators. General specifications

GOST 6899-75: Manual hoists and trolleys. General specifications

GOST 7062-90: Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances

GOST 7140-98: Industrial explosives. Test methods in methane air and dust air mixtures

GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 765-85: Anchor shackles. Specifications

GOST 766-74: Anchors. General specifications

GOST 7829-70: Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances

GOST 8059-83: Universal joints with sliding liners for rolling mill equipment

GOST 8483-81: Fishing taps and overshots for prospecting

GOST 8497-78: Matrosov's anchor. Specifications

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8565-81: Exploration bell sockets

GOST 8838-81: Shaftline conical joints. Types, construction and dimensions

GOST 8889-88: Gears of turbine and compressor machines. Technical requirements. Control methods

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9652-68: Shutoff Devices of level indicators of liquids for Pd up to 40 kgf / cm2. Specification

GOST 9690-71: Lanyard stoppers

GOST R 50891-96: Machine reducers. General specifications

GOST R 50895-96: Toothed clutches. Specifications

GOST R 51047-97: Cutters for shearers and entry-driving machines. General specifications

GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications

GOST R 51177-2017: Overhead line hardware. General technical requirements

GOST R 51177-98: Overhead line hardware. General specifications

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications

GOST R 52277-2004: Tamping picks of ballast tampers for levelling and lining railway tracks. Specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53628-2009: Metal roller bearing parts for bridge building. Specifications

GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 53978-2010: Special railway rolling stock. General technical requirements

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements

GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

GOST R 55819-2013: Brake block holder and key for railway rolling stock. General specifications

GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 58201-2018: Mining drilling for pneumatic and hydraulic anchorage installers. General specifications

GOST R 58518-2019: Steel construction hammers. Technical conditions

GOST R 58753-2019: Cargo rope slings for construction. Technical specifications

GOST R 59620-2022: Public roads. Spherical (spherical segmental) combined bearing parts for bridge structures. General specifications

GOST R 70352-2022: Fittings for overhead power lines up to 1 kV with self-supporting insulated wires. General specifications

MI 1069-85: State system for ensuring uniformity of measurements. Methodical instructions. Machine-oriented data recording system for metals (alloys)

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

OST 108.004.109-80: Welded joint seams of CHP plant power equipment. Magnetic-particle control method.

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.

OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.

OST 24.070.01-86: Products of mining machinery. General technical requirements.

OST 24.090.39-83: Shell stacker cranes. General specifications.

OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.

OST 24.149.03-89: Cogwheels for traction rolling stock of mainline railways. Technical conditions.

OST 24.191.02: Crane drums. Connection between the gear and the drum. Design and dimensions

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 24.895.03: Wedge jacks, mechanical and hydraulic. Parameters, basic dimensions, technical requirements

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.460-99: Lobes, locks and pads. Design, dimensions and general technical requirements.

OST 26.260.462-99: Devices for installation of instruments measuring the temperature for PN from 0.6 to 16 MPa. Types, design, dimensions and general technical requirements

OST 26.260.472-2000: devices for installation of pressure gauges and pressure selection. General technical requirements.

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26-01-1159-75: Pipe input-outputs of steel welded containers and devices. Technical requirements.

OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.

OST 26-01-144-81: Studs, nuts, washers, threaded sockets, protective caps for vessels and apparatus for pressure over 9.81 up to 98.1 MPa (over 100 up to 1000 kgf/cm2). General technical requirements. Acceptance rules. Test methods. Marking.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-01-86-88: fixed metal seals for vessels and apparatus for pressure over 10 to 100 MPa (100 to 1000 kgf / cm2). Types. Design and dimensions. Technical requirements . Acceptance rules. Control methods.

OST 26-02-2053-79: Adapter and hatches made of double-layer steel. Technical requirements .

OST 26-02-376-78: Technological units of gas and oil industry. General technical requirements.

OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.

OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.

OST 26-17-01-83: Heat exchangers and standard air cooling devices. Technical requirements to a bead forming with torque limiting.

OST 26-18-3-86: liquid mesh filter for piping. Design, parameters and dimensions.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.

OST 34 001-73: Lifting equipment. Requirements for materials

OST 34 002-73: Equipment and general-purpose machines. Requirements for materials

OST 34-13-910-86: Cargo rope slings for construction. Technical conditions

OST 34-13-946-87: Staples for overhead power lines. Technical conditions

OST 34-13-947-87: Mount junctions. Technical conditions

OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.

OST 36-62-81: Hoisting equipment. General technical requirements.

OST 37.002.0444-77: Assembly units and fastening parts of overhead conveyors to the supporting metal structures. Construction and dimensions

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations

PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNST 364-2019: Automatic coupling device with automatic coupling sa-3t of freight cars of railways of 1520 mm gauge. Technical conditions

RD 102-002-88: Machines, tools and equipment for pipeline construction. Designing and manufacturing.

RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 22-207-88: Lifting machines. General requirements and production standards

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 26.260.007-92: Pipelines and pipeline parts for pressure of 250 MPa (2500 kgf/cm2) of polyethylene production. Basic technical requirements, certification, operation and repair

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-3-597-81: Guidelines for the application of the magnetic treatment method for oil-gas-water mixtures "MUPS-AzNIPIneft"

RD 50-534-85: Guidelines. System of standards for tooling. Adaptations to metal-cutting machine tools. Information retrieval system of choice. Information array of equipped technological operations. Rules of formation

RDI 26-15-80: Instructions for making inner vessels of isothermal tanks for liquefied carbon dioxide

Resolution: Rules for the design and safe operation of steam and hot water boilers

RTM 108.020.33-86: Labyrinth packings of stationary steam and gas turbines and compressors. Design and calculation

RTM 108.022.106-86: Gas turbine plants. Strength calculation of discs and rotors

RTM 24.020.33-75: Stationary steam and gas turbines, compressors. Labyrinth seals, type selection and leakage calculation

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

Safety Guide: Recommendations on arrangement and safe operation of process pipelines

Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 494.1325800.2020: Spatial metallic coatings. Design rules

SP 53-101-98: Manufacturing and quality control of steel structures for construction

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 005.2-2004: Pipe fittings. Metals used in the valve industry. Part 2. Reference data on the properties of materials

ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications

TU 26-01-355-80: Electrolyzers. Type of SPP with component equipment

TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions

TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions

TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3615-018-00217320-2006: Spherical tanks. Technical specifications

TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases

TU 3615-132-00220302-2008: Ball tanks for liquefied petroleum gases. Specifications

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

TU 3742-011-34390194-2003: Check valves DN 100-1400 PN 8, 0 MPa; PN 12, 5 MPa; PN 16, 0 MPa. Technical conditions

UO 38.12.007-87: Centrifugal compressors. General technical conditions for repairs

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!