PB 03-440-02
ПБ 03-440-02
|
|
Attestation rules for nondestructive inspection personnel
Правила аттестации персонала в области неразрушающего контроля
Status: Effective
The rules establish the procedure for certification of personnel performing non-destructive testing of technical devices, buildings and structures at hazardous production facilities.
Правила устанавливают порядок аттестации персонала, выполняющего неразрушающий контроль технических устройств, зданий и сооружений на опасных производственных объектах
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
1/23/2002
SKU: RUSS18673
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.1. Common to various hazardous production facilities »
Standards for pipe fittings (TPA) »
10. Production »
10.6 Non-destructive testing »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
I Industrial Safety Administration »
4 Education and training infield of industrial safety »
ISO classifier »
19 TESTS »
19.100 Non-destructive testing »
The Document References:
PB 03-246-98: Rules for audit of industrial safety
PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.
The Document is Referenced By:
GOST 31443-2012: Steel pipes for crafts pipelines. Specifications
GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 7370-2015: Railway frogs. Specifications
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications
GOST R 55430-2013: Detachable pipe joints. Evaluation of technical condition and methods of testing. Operation safety
GOST R 55999-2014: In-line inspection of gas pipelines. General requirements
GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications
GOST R 58778-2019: Gas distribution systems. Gas distribution networks and gas consumption. Category 1a high pressure gas pipelines
GOST R 58819-2020: Pipe fittings for trunk oil pipelines and oil product pipelines. Rules for assessing the technical condition and extension of assigned indicators
GOST R ISO 13534-2013: Petroleum and natural gas industries. Drilling and production equipment. Inspection, maintenance, repair and remanufacture of hoisting equipment. General technical requirements
GOST R ISO 13626-2013: Petroleum and natural gas industries. Drilling and production equipment. Drilling and well-servicing structures. General technical requirements
I 1.2.1.02.019.1121-2016: Determination of mechanical properties of metal of equipment of nuclear power plants by means of non-reference technique in terms of hardness characteristics. Instructions
Letter 09-00-06/1968: On regulatory legal acts in the field of welding and non-destructive testing
Model series 20.0027: Reinforced Concrete Supports for Joint Suspension of 10 kV Overhead Line Protected Wires and Self-Carrying Insulated Wires of Double-Chain 0.4 kV Overhead Line. Working drawings
MT-RTS-VIK-M-01-2017: Methods of visual and measuring control of trunnions and traverses of metal pouring ladles, hooks and extensions of hook suspensions of cranes transporting molten metal
MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)
MU 1198-00.008: Method for non-destructive testing of brake bands of drawworks and winches of units for underground and workover of wells
MU 1798-00.001: Methods of conducting non-destructive testing of the universal machine key UMK-1C
ODM 218.5.009-2008: Technology for magnetic diagnostics of prestressed reinforcement and assessment of the technical condition of reinforced concrete beams of bridge structures
Order 1155: Model program on the course "Industrial, Environmental, Energy Safety, Safety of Hydraulic Structures" for pre-certification (pre-examination) training of managers and specialists of organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision.
Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"
Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
Order 490: Federal norms and rules in the field of industrial safety "Basic requirements for non-destructive testing of technical devices, buildings and structures at hazardous production facilities"
Order 601n: On the approval of the professional standard "Specialist in the diagnosis of pipelines and technological equipment of the gas industry"
OST 26.260.14-2001: Pressure-operated vessels and devices. Leak check techniques.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 08-624-03: Safety Regulations for oil and gas industry
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants
PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.
R Gazprom: Temporary technical requirements for equipment for opening pipelines
RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.
RD 03-29-93: Instructional Guidelines For Engineering Certification of Steam and Hot-Water Boilers, Pressure Vessels, Steam and Hot-Water Pipelines
RD 03-606-03: Instructions for visual and measuring control
RD 08-95-95: Provision on the system for technical diagnostics of welded vertical cylindrical oil and petroleum products tanks
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 10-16-92: Procedural Guidelines for the Inspection of Facilities with Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot-Water Piping
RD 10-210-98: Procedural Guidelines for Technical Inspection of Metal Structures of Steam and Hot Water Boilers
RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.
RD 13-03-2006: Guidelines on the procedure for conducting eddy current testing of technical devices and structures used and operated at hazardous production facilities
RD 13-04-2006: Guidelines on the procedure for conducting thermal control of technical devices and structures used and operated at hazardous production facilities
RD 13-05-2006: Methodical recommendations on the procedure for conducting magnetic particle inspection of technical devices and structures used and operated at hazardous production facilities
RD 13-06-2006: Guidelines for the procedure for capillary control of technical devices and structures used and operated at hazardous production facilities
RD 15-09-2006: Guidelines for the degassing of coal mines
RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines
RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators
RD 15-16-2008: Procedure of the order of holding of industrial safety expertise of rubber-rope conveying belts applied in hazardous industrial facilities
RD EO 1.1.2.01.0086-2014: Quality Assurance in the Repair of Nuclear Power Plant Systems and Equipment. Main provisions
RD EO 1.1.2.01.0480-2009: Regulations on accreditation and audit of organizations for performance of work, provision of services for the repair of nuclear power plants of Energoatom Concern OJSC
RD EO 1.1.2.01.0713-2013: Provisions on acceptance and testing form conformity assessment for nuclear plants.
RD-15-15-2008: Guidelines on the procedure for conducting industrial safety expertise of mine electric locomotives
SDA 06-2008: Terms and definitions used in the unified conformity assessment system at facilities controlled by the Federal Service for Environmental, Technological and Nuclear Supervision
SDA 13: Requirements for independent bodies for staff certification
SDA 13-2008: Requirements for independent bodies for staff certification
SDA 13-2009: Requirements for independent bodies for staff certification
SDA 18: Requirements for organizations operating in the field of industrial safety for hazardous production facilities, safety of electric power facilities and construction
SDA 24-2009: Rules for assessment (certification) of testing laboratories personnel
SDA-06-2009: Terms and definitions used in the Unified system of conformity assessment in the field of industrial, environmental safety, safety in the energy sector and construction
SDOS-01-2008: Methodical recommendations about on the order of radiation control of technical devices and structures applied and operated on hazardous production objects
SDOS-07-2012: Methodological recommendations on the procedure for tightness control of technical devices and structures used and operated at hazardous production facilities
SDOS-08-2012: Guidelines on the procedure for conducting acoustic emission monitoring of metal structures of jib cranes
SDOS-11-2015: Guidelines on the procedure for conducting ultrasonic testing of metal structures of technical devices, buildings and structures
SO 34.20.514-2005: Guidelines for the operation of the gas economy of thermal power plants
SP 406.1325800.2018: Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation
SP 86.13330.2014: Main (Trunk) pipelines
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.