GOST 10528-90
ГОСТ 10528-90
|
|
Geodetic levels
Нивелиры. Общие технические условия
Status: Effective
The standard applies to levels designed to determine the elevation method of geometric leveling on the vertical rails. The standard does not apply to laser levels.
Стандарт распространяется на нивелиры, предназначенные для определения превышений методом геометрического нивелирования по вертикальным рейкам. Стандарт не распространяется на лазерные нивелиры.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
6/22/1990
SKU: RUSS18698
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.5 Optical and optical-mechanical devices, light and electron microscopes »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.180 Optics and optical measurements »
17.180.30 Optical measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.180 Optics and optical measurements »
17.180.30 Optical measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P4 Optical and optomechanical devices, light and electron microscopes »
P42 Geodetic instruments and tools »
National Standards for OKSTU »
OPTICAL INSTRUMENTS AND EQUIPMENT »
Devices and instruments geodetic and mine surveying »
As a Replacement Of:
GOST 10528-76: Geodetic levels. General specifications
GOST 11158-83: Leveling slats. General specifications
The Document References:
GOST 11897-94: Tripods for geodetic instruments. General technical requirements and methods of tests
GOST 166-89: Vernier callipers. Specifications
GOST 2.601-95: Operational documents
GOST 23543-88: Geodesic instruments
GOST 29329-92: Balance for static weightings
GOST 7502-98: Measuring metal tapes. Specifications
The Document is Referenced By:
GKINP 03-010-03: Instructions for leveling classes I, II, III and IV
GOST 11897-94: Tripods for geodetic instruments. General technical requirements and methods of tests
GOST 13556-91: Building tower pillars building tower pillars
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 25251-82: Electric gantry cranes. Testing methods
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26433.2-94: System of ensuring geometric parameters accuracy in building. Rules for measuring parameters of buildings and works
GOST 26869-86: Nursery stock of decorative shrubs. Specification
GOST 30412-96: Road roads and airfields. Methods for measuring base irregularities and coatings
GOST 32869-2014: Automobile roads of general use. Requirements for conducting topographic and geodetic surveys
GOST 33101-2014: Automobile roads of general use. Road coating. Measuring flatness
GOST 33146-2014: Automobile roads of general use. Pipes for road culvert. Control methods
GOST 33383-2015: Public roads. Geometric elements. Methods for determination of parameters.
GOST 33687-2015: Machines and tools for surface treatment of soil. Methods of tests
GOST 34518-2019: Industrial furnaces and thermal units. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST 8.346-2000: State system for ensuring the uniformity of measurements. Steel horizontal cylindrical tanks. Calibration methods
GOST 8.570-2000: State system for ensuring the uniformity of measurements. Steel vertical cylindrical tanks. Calibration methods
GOST 8.600-2011: State system for ensuring the uniformity of measurement. Fuel tanks for liquid oil products. Checking methods.
GOST 8829-2018: Prefabricated reinforced concrete and concrete products. Load test methods. Rules for evaluating strength, stiffness and crack resistance
GOST 8829-85: Prefabricated reinforced concrete structures and elements. Methods of testing and estimation of strength, rigidity and resistance to cracking
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST R 52577-2006: General use highways. Methods for determination of parameters of highways geometric elements
GOST R 52752-2007: Formworks. Test methods
GOST R 52767-2007: Automobile roads of the general use. Road facilities. Methods for determination of parameters
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 54580-2011: Air transport. Requirements and procedures for measuring mass of the aircraft in the operational process. Main principles
GOST R 56925-2016: Automobile roads and airfields. Uneveness measurement methods for base courses and pavements
GOST R 57790-2017: Timber bearing structures. Methods of strength and deformability testing
GOST R 58349-2019: General automobile roads. Road clothes. Methods for measuring the thickness of pavement layers
GOST R 58900-2020: Bent steel sheet profiles with trapezoidal corrugations for construction. Load-bearing test method
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
GOST R 59864.2-2022: Public roads. Earth surface. Methods of measuring geometric parameters
GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters
GOST R 70566-2022: Land reclamation systems and structures. Rules of inspection and monitoring of technical condition
GOST R 8.569-98: State system for ensuring the uniformity of measurements. Vehicle tanks for oil product liquids. Methods of verification
GOST R 8.792-2012: State system for ensuring the uniformity of measurements. Measuring systems «Digital level - code surveyor's pole». Verification Procedure
ITOs 22-01-01: Instructions for the technical examination of cranes
MI 02-00: Methods of the Institute. Reiki leveling. Methods of verification
MI 2220-13: Recommendation. State system for ensuring uniformity of measurements. Consumption and volume of waste liquid. Measurement technique in free-flow conduits by filling level with preliminary calibration of the measuring section
MI 2406-97: State system for ensuring uniformity of measurements. Liquid flow in open channels of water supply and sewage systems. Measurement Technique Using Standard Weirs and Trays
MI 2724-2002: State system for ensuring uniformity of measurements. Steel vertical cylindrical heat-insulated tanks. Method of verification by the geometric method
MI BGEI 01-89: Guidelines. Comparator MK-1. Methods and means of metrological certification and verification
MI BGEI 07-90: Levels. Methods of verification
MI BGEI 19-92: Methods of the Institute. Geodetic laser systems. Methods and means of verification
MI BGEI 34-00: Base unit BP-1. Method of measurement of check bases
ODM 218.3.004-2010: Guidelines for the thermal profiling of asphalt concrete pavements
PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters
PNST 338-2018: General automobile roads. Subgrade. Methods for determining geometric and physical parameters
R 50.2.023-2002: National System for Standardization of Measurements. Levels. Verification Technique
RD 10-112-97: Guidelines for conducting a survey of the technical condition of lifts (towers) with an expired service life in order to determine the possibility of their further operation. Part 9. Lifts and aerial platforms
RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes
RD 22-28-36-01: Lifting cranes. Typical program and test procedure. Standard testing programs and procedures.
RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 34.21.322-94: Procedural Guidelines for Organization and Execution of Inspections of Settling of Foundations and Deformations of Buildings and Structures Under Construction and in Service at Thermal Power Stations
RD 34.21.621-95: Guidelines for straightening crane tracks in the main buildings of thermal power plants
RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
RD 50-156-79: Guidelines. Determination of the capacity and graduation of reinforced concrete cylindrical tanks with a precast wall with a capacity of up to 30,000 cubic meters by the geometrical method
RD 68-8.17-98: Local calibration schemes (LPS) for measuring instruments (SI) for topographic-geodetic and cartographic purposes
RD BGEI 05-89: Metrological support. Collection of sets of calibration tools for geodetic measuring instruments
RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2
RMG 105-2010: State system for ensuring the uniformity of measurements. Vertical steel cylindrical tanks with thermal insulation. Procedure of verification bi geometrical method
RMG 110-2010: State system for ensuring the uniformity of measurements. Cylindrical reinforced-concrete tanks with precast wall with capacity up to 30 000 m3. Procedure of verification by geometrical method
RTM 68-8.20-93: Geodesic polygons. General specifications
RTM 68-8.24-01: Standardized metrological characteristics of measuring means of topographic-geodesic designation
SP 12-103-2002: Tracks for ground rail cranes. Design, installation and operation
SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules
ST RK 1219-2003: Motor roads and airfields. Measurement procedure for bases and coatings
ST RK 1279-2013: Highways and airfields. Methods for determining the roughness of the road surface and friction coefficient for the vehicle wheels to the road surface
ST RK 1293-2004: Motor roads and airfields. Methods for determination of flexible road pavement elastic modulus and their classification
ST SSFZhT TsP 058-99: Special rolling stock. Machines for compaction and stabilization of ballast. Typical test methods for determining the indicators of functional and occupational safety in the area of the working bodies
ST SSFZhT TsP 059-99: Special rolling stock. Machines for bearing, tamping and leveling path. Typical test methods to verify the functional indicators related to traffic safety and safety indicators in the area of working bodies
STB 1566-2005: Roads automobile. Test methods
STB 2158-2011: Construction. Device bridges and pipes. The nomenclature of controlled quality indicators. Quality control of work
TR 94.03.1-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 94.03.1: Installation of Precast Concrete and Reinforced Concrete Structures for Sub-Grade P
TR 94.03.2-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 03.2: Construction of Super-Structures Made from Precast Reinforced Concrete Elements
TR 94.04-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 04: Construction of Brick Buildings
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
TSN 50-302-96: Construction of Foundations for Civil Buildings and Structures Located in the Metropolitan Area Administered by the City of St. Petersburg
TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type
VSN 411-88: Installation of Lubricating, Hydraulic, and Pneumatic Systems for General Industrial Applications
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
