GOST 15.005-86

ГОСТ 15.005-86

Creation of articles manufactured individually or in small batches and assembled at the place of operation

Создание изделий единичного и мелкосерийного производства, собираемых на месте эксплуатации

Status: Effective - Introduced for the first time. The limitation of effectiveness has been lifted: Decree of the State Standard No. 2390 of 07.17.89

The standard establishes the order of development, coordination and approval of technical specifications, technical documentation, as well as the procedure for manufacturing, monitoring, installation, acceptance and commissioning of single and small-scale production and their components, the final assembly, commissioning, testing and development of which only on-site as part of a specific production facility. The standard does not apply to these products, developed by order of the Ministry of Defense of the USSR.

Стандарт устанавливает порядок разработки, согласования и утверждения технического задания, технической документации, а также порядок изготовления, контроля, монтажа, приемки и сдачи в эксплуатацию изделий единичного и мелкосерийного производства и их составных частей, окончательная сборка, наладка, испытания и доводка которых могут быть проведены только на месте эксплуатации в составе конкретного производственного объекта. Стандарт не распространяется на указанные изделия, разрабатываемые по заказам Министерства обороны СССР.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: USSR State Committee for Standards, 10/15/1986

SKU: RUSS18713

Price: $77.22

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 01 General. Terminology. Standardization. Documentation »

PromExpert » SECTION I. TECHNICAL REGULATION » III Quality » 2 Product quality assurance » 2.1 Ensuring product quality at stage of technical preparation of production » 2.1.2 Technological preparation of production »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.110 Technical product documentation »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.110 Technical product documentation »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T52 Design Documentation System »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Development and launch of products for production »

As a Replacement Of:

GOST 16348-80: Furnaces induction vacuum melting. General technical requirements

GOST 23196-78: Superchargers centrifugal for coke production. The main parameters

The Document References:

GOST 15.012-84: System of product development and launching to manufacturing. Patent pattern.

The Document is Referenced By:

GOST 10580-74: Foundry equipment. General specifications

GOST 12.2.100-84: Occupational safety standards system. Machines and equipment for manufacturing clay and lime brick, ceramic and asbestos cement products. General safety requirements

GOST 12.2.100-97: Machines and equipment for manufacturing clau and lime brick, ceramic and asbestos cement products. General safety requirements

GOST 12997-84: SSI Products. General specifications

GOST 20680-2002: Mechanical mixing devices (agitated vessels). General specifications

GOST 22522-91: Radioisotope fire detectors

GOST 23118-2012: Building steel structures. General specifications

GOST 23118-99: Steel construction structures General Technical Specifications

GOST 24277-91: Stationary steam turbines for nuclear power plants. General specifications

GOST 24444-87: General assembly and technological requirements

GOST 26.205-88: Telemechanics complexes and devices

GOST 26646-90: Stationary distillation desalinization units

GOST 26980-95: Single bucket excavators. General specifications

GOST 28269-89: High-power stationary steam boilers

GOST 30605-98: Digital voltage and current measuring converters. General specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 34396-2018: Oil and oil products custody transfer metering systems. General specifications

GOST R 50.06.01-2017: Conformity assessment system for the use of nuclear energy. Сonformity assessment of products in the form of acceptance. The procedure of

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 52348-2005: Shooting-galleries. Armoured protection and technical resistance to burglary. Acceptance rules and methods of testing

GOST R 52931-2008: Instruments for process monitoring and control. General specifications

GOST R 53704-2009: Complex and integrated security systems. General technical requirements

GOST R 54982-2012: Gas distribution systems. Objects of liquid petroleum gases. General requirements for operation. Operational documentation

GOST R 55165-2012: Mining equipment. Rotary bucket quarry excavators. General technical requirements and test methods

GOST R 55166-2012: Mining equipment. Rotary bucket quarry excavators. General technical requirements and test methods

GOST R 55260.2.1-2012: Hydro power plants. Part 2-1. Hydrotreaters. Procurement specification

GOST R 55260.3.1-2013: Hydro power plants. Part 3-1. Hydraulic turbines. Procurement specification

GOST R 55610-2013: Oil measuring systems. General specifications

GOST R 55734-2013: Mining equipment. Quarry spreaders. General technical requirements and test methods

GOST R 58125-2018: Space systems. System of technical support of space hardware development and production. Organization and operation of technological preparation of production

OST 24.030.46-74: Stationary steam boilers. Procurement. General Specifications.

OST 45.51-96: Automatic container telephone stations. Acceptance Rules

OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval

OST 95 18-2001: Scientific-research and experimental-design procedures. General provisions.

P SSFZhT 45/ISO 9001-2003: The certification system on the federal railway transport of the Russian Federation. Quality Management System. Requirements

PB 10-77-94: Installation and Safe Operation Requirements for Escalators

PNST 165-2016: Electric generating sets for nuclear plants with internal combustion engines. General specifications. Рlacement requirements

R 50-54-104-88: Recommendations. Production systems are flexible. Scope of work and documentation

R 50-54-74-88: Recommendations. Production systems are flexible. Test methods and reliability control

R 50-601-10-89: Recommendations. System development and production of products. Application of GOST 15.001-88

R 50-601-12-89: Recommendations. System development and production of products. Modernization, modification and improvement of products

RD 09-167-97: Instructions for Arranging and Carrying out the Inspection in Design and Manufacture of Hazardous Production Facilities in the Chemical, Petrochemical and Oil Refining Industries

RD 14-06-2007: Instructions on the procedure for the implementation of supervision and control over compliance with industrial safety requirements in the manufacture of technical devices and their use in fire and explosion hazardous, special and chemically hazardous ind

RD 153-34.2-31.401-2002: Standard Technical Requirements Hydraulic Turbine Equipment Delivered to Hydroelectric Power Plants by Manufacturers

RD 31.30.13-89: Standard of detailed design (project) for construction of a seaport. Ministry of Marine Fleet, Soyuzmorniiproekt 1989

RD 34.26.103: Procedural Guidelines for Preliminary Approval of the Use of Electric Boilers and Other Heat-Generation Electric Devices

RD 52.18.617-2015: Organization and order of conducting the monitoring

RG Coordination of technical tasks and technical conditions for equipment and cable products necessary for the construction of power units of nuclear power plants of Rosenergoatom Concern. Regulations

RG Regulations for the interaction of Concern Rosenergoatom OJSC and the Engineering Company (NPP General Designer) upon approval of technical documentation for NPP equipment

RG Regulation of the interaction of Rosenergoatom Concern OJSC and Engineering Company (NPP General Designer) in the coordination of technical specifications and specifications for NPP equipment

RST RSFSR 779-91: System development and production of products. Means of mechanization for enterprises of the textile industry

RTM Stages of development and composition of documentation for the electric drive and automation systems

RTM 36.21-90: Technical Installation Requirements for the Design, Manufacture, and Delivery of Equipment for Process Complexes of Ferrous Metallurgy Facilities Using Factory-Assembled Ready-to-Use Sets. Procedural Guide

SP 162.1330610.2014: Safety requirements for production, storage, transportation and use of liquid hydrogen

STO The procedure for organizing and conducting the modernization of systems and equipment

STO 95 12006-2017: Objects of use of atomic energy. Pre-voltage system of the protective shell of the reactor compartment of the nuclear power plant. General requirements

VSN 398-87: Installation of Process Equipment for Blast-Furnace Plants

VSN 406-87: Installation of Process Equipment for Ore Dressing and Sintering Plants

VSN 513-88: Planning of Installation Areas for Modular Factory-Assembled Mine Transport Machinery at Open-Pit Coal Mines. Technical Requirements

GOST R 50.04.08-2019: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of tests. Order of conduct

GOST R 58787-2019: Electric generating sets with internal combustion engines for nuclear power plants. General technical conditions. Accommodation

Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)

Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)

Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"

Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"

OT Quality assurance program in the development and manufacture of products supplied to nuclear power plants. Content and Development Requirements

RD EO Provisions on acceptance and testing form conformity assessment for nuclear plants.

Resolution: Rules for the design and safe operation of steam and hot water boilers

RG Coordination of technical specifications and specifications for equipment and cable products used at nuclear power plants. Regulations

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Hot-rolled sheet. Range
Language: English
Price: $72.27
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96
Hexagon head bolts. Product grades A and B
Language: English
Price: $203.94


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!