GOST 17366-80
ГОСТ 17366-80
|
|
Welded thick-walled steel barrels for chemical products
Бочки стальные сварные толстостенные для химических продуктов
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)
The standard applies to steel welded thick-walled barrels designed for packing, transporting and storing dangerous goods belonging to GOST 19433-81 to classes 6 and 8, as well as low-boiling liquid chemical products that create an overpressure of up to 0.33 MPa at 60 ° C (3.3 kgf
Стандарт распространяется на стальные сварные толстостенные бочки, предназначенные для упаковывания, транспортирования и хранения опасных грузов, относящихся по ГОСТ 19433-81 к классам 6 и 8, а также низкокипящих жидких химических продуктов, создающих при температуре 60 °С избыточное давление до 0,33 МПа (3,3 кгс/см¤), изготовляемые для нужд народного хозяйства и для поставки на экспорт.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
2/20/1980
SKU: RUSS18722
The Product is Contained in the Following Classifiers:
Welding regulations »
Documentation »
ISO classifier »
55 PACKAGING AND DISTRIBUTION OF GOODS »
55.140 Barrels. Drums. Canisters »
National standards »
55 PACKAGING AND DISTRIBUTION OF GOODS »
55.140 Barrels. Drums Canisters »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D8 Metal containers »
D82 Metal barrels and drums »
National Standards for OKSTU »
OTHER AND NON-CONDITIONED METAL PRODUCTS »
Barrels, drums, metal »
As a Replacement Of:
GOST 17366-71: Barrels, steel, thick-walled for chemical products
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 103-76: Hot-rolled steel strip. Dimensions
GOST 11371-78: Washers. Specifications
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 1412-85: Flakish graphite cast iron
GOST 14192-77: Marking of cargoes
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15979-70: Canned beans
GOST 18425-73: Complete, filled transport packages. Vertical impact test by dropping
GOST 18573-86: Wooden boxes for the production of chemical industry
GOST 19433-88: Dangerous goods. Classification and marking
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 19906-74: Sodium nitrite technical. Technical conditions
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
GOST 26319-84: Dangerous cargoes
GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2930-62: Measuring instruments. Characters and signs
GOST 3242-79: Welded joints
GOST 380-88: Common quality carbon steel. Grades
GOST 4366-76: Grease synthetic solidol. Specifications
GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications
GOST 503-81: Cold-rolled low-carbon steel strip. Specifications
GOST 6009-74: Hot-rolled steel strip. Specifications
GOST 6745-79: Enamel ГФ-1426. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.402-80: Metal surface preparation for painting
GOST 9087-81: Welding melted fluxes
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
The Document is Referenced By:
GOST 12844-74: Technical epichlorhydrine. Specifications
GOST 14189-81: Pesticides. Rules for acceptance, methods of sampling, packing, marking, handling and storage
GOST 159-52: Cooling cryogenic liquid
GOST 1639-2009: Non-ferrous metals and alloys scrap and waste. General specifications
GOST 1639-93: Non-ferrous metals and alloys scrap and waste. General specifications
GOST 16485-87: Dimethyldichlorsilan purified. Specifications
GOST 16756-71: Butyl methacrylate. Specifications
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 1928-79: Coal solvent. Specifications
GOST 19652-89: Synthetic primary fatty alcohols, C7-C9 fractions. Specifications
GOST 20015-88: Chloroform. Specifications
GOST 20370-74: Methyl methacrylate. Specifications
GOST 2168-83: Technical dimethylaniline. Specifications
GOST 2184-2013: Sulphuric acid for industrial use. Specifications
GOST 2263-79: Sodium hydroxide for industrial use. Specifications
GOST 25821-83: Fluid PGV. Specifications
GOST 26371-84: Ethyl silicate-40. Specifications
GOST 2768-84: Acetone technical. Specifications
GOST 28471-90: Microbiological products. Packing, marking, transportation and storage
GOST 33341-2015: All-season antifreeze compositions and liquid coolants for heat-exchange systems. Specifications
GOST 33872-2016: Denatured bioethanol fuel. Specifications
GOST 450-77: Calcium chloride technical. Technical conditions
GOST 4-84: Carbon tetrachloride for industrial use. Specifications
GOST 8313-88: Technical ethylcellosolve. Specifications
GOST 902-76: Sodium bisulfite technical (water solution). Technical conditions
GOST 9069-73: Essential oils, aromatics and their intermediates, cosmetic raw material. Packing, marking, transportation and storage
GOST 9805-84: Isopropyl alcohol. Specifications
GOST 9875-88: Technical diethylamine. Specifications
GOST 9966-88: Technical triethylamine. Specifications
GOST R 51999-2002: Technical rectified and denatured synthetic ethyl alcohol. Specifications
GOST R 52574-2006: Technical and denatured synthetic ethyl alcohol. Specifications
GOST R 53200-2008: Denatured fuel bioethanol. Specifications
GOST R 53789-2010: Unconcentrated nitric acid. Specifications
GOST R 54564-2011: Non-ferrous metals and alloys scarp and waste. General specifications
GOST R 54564-2022: Non-ferrous metals and alloys scrap and waste. General technical conditions
GOST R 55064-2012: Sodium hydroxide for industrial use. Specifications
GOST R 55878-2013: Rectified hydrolytic technical ethyl alcohol. Specifications
GOST R 57234-2016: Microbiological products. Packing, marking, transportation and storage
GOST R 57252-2016: Technical furfural. Specifications
Zh3-197: Recommendations on water treatment technology with complexons in closed heating systems at coolant temperatures up to 115 degrees Celsius
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.