GOST 2283-79
ГОСТ 2283-79
|
|
Cold-rolled tape made of tool steel and spring steel
Лента холоднокатаная из инструментальной и пружинной стали
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard applies to cold-rolled steel strip intended for the manufacture of springs, measuring tapes and other products.
Стандарт распространяется на стальную холоднокатаную ленту, предназначенную для изготовления пружин, измерительных лент и других изделий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
3/16/1979
SKU: RUSS18737
The Product is Contained in the Following Classifiers:
Welding regulations »
Main materials »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.25 Spring steel »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.25 Spring steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V34 Tapes »
National Standards for OKSTU »
METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) »
Cold-rolled steel strip (except for stainless steel and transformer) »
As a Replacement Of:
GOST 2283-69: Steel cold rolled band from tool steel and spring steel
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 10396-84: Crepe cable paper
GOST 10877-76: Preservative oil K-17
GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips
GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12345-88: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15162-82: Artificial leather and synthetic and film materials. Methods for the determination of frost proof in static conditions
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 18617-83: Wooden cases for hardware. Specifications
GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 20435-75: Universal metallic closed container of nominal gross mass 3,0 tn. Specifications
GOST 20799-75: Industrial oils. Specifications
GOST 20799-88: Industrial oils Specifications
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 2283-69: Steel cold rolled band from tool steel and spring steel
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 27809-88: Steel and cast iron. Methods of spectroorganic analysis
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 29329-92: Balance for static weightings
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3560-73: Sealing tepe
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4381-87: Lever-type micrometers. General specifications
GOST 4543-71: Structural alloyed steel
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 6507-90: Micrometers. Specifications
GOST 7566-94: Metal products
GOST 8233-56: Steel. Microstructure standards
GOST 8273-75: Packing paper
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9569-79: Paraffin paper
The Document is Referenced By:
GOST 10110-87: Circles diamond
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 10670-77: Log band saws. Technical conditions
GOST 11507-78: Petroleum bitumen. Method for determination of brittle point
GOST 13568-75: Power transmission
GOST 13944-86: Retaining spring flat rings and grooves for them. Specifications
GOST 14225-83: Wooden cases
GOST 14229-78: Spring pins. Specification
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 17020-78: Clamps, holders and belts for fixing of pipelines and cables. Design and sizes
GOST 22358-87: Racing and hockey skates. General specifications
GOST 26455-85: Semifixed disk couplings. Main parameters and dimensions
GOST 26455-97: Semifixed disk couplings. Parameters, design and dimensions
GOST 28244-89: Reinforced wires and cords. Specifications
GOST 3057-90: Disk springs. Specifications
GOST 33143-2014: Public roads. Bitumen of petroleum viscous for road building. The method of determining the fracture temperature by Fraas method
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 33529-2015: Band saws with cutting elements, welded stellate. Specification
GOST 33532-2015: Saws frame and tare with cutting elements, welded with stellate, for vertical sawmills. Specification
GOST 3634-89: Access manhole covers and storm-flow Receivers for manholes Technical requirements
GOST 5524-75: Saws for vertical gang mills
GOST 6532-77: Band saws for sawing of wood. Specifications
GOST 9533-81: Trowels, tuck pointing tools. Specifications
GOST R 53843-2010: Engines of vehicles. Piston rings. Technical requirements and test methods
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 58515-2019: Trowel, shovels and cuts. Technical conditions
ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads
ODM 218.7.003-2008: Recommendations on the Fraas viscous oil road bitumen fragility temperature method
ODM OS-711-r: Method for determining the long-term strength (fracture strength under repeated tension) of organic binders
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 3-98-80: Constructional and spring refining steel. Technical requirements.
PI 249-2000: Riveting of metal structures. application
PNST 5-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of the Fraass breaking point
RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI
RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions
ST RK 1229-2003: Bitumens and bituminous binders. Method for determination a Fraas brittle point
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.