SNiP 2.04.09-84
СНиП 2.04.09-84
|
|
Automatic fire protection systems
Пожарная автоматика зданий и сооружений
Status: Not effective - Superseded
Standards apply to the design of automatic fire extinguishing systems and fire alarms, as well as non-automatic deluge and gas fire extinguishing installations and manual fire detectors for buildings and structures for various purposes, including those built in areas with special climatic and natural conditions. The standards do not apply to the design of automatic fire extinguishing installations and fire alarm systems: buildings and structures designed according to special standards; technological installations located outside buildings; warehouse buildings with mobile racks; warehouse buildings for storing aerosol products; Warehouse buildings of varnishes, paints, resins, flammable liquids, liquids with the height of the storage of goods more than 5.5 m; warehouse buildings with a storage height of more than 16 m; warehouse buildings with a height of more than 10 m with a storage height of goods up to 5.5 m.
Нормы распространяются на проектирование автоматических установок пожаротушения и пожарной сигнализации, а также неавтоматических дренчерных и газовых установок пожаротушения и ручных пожарных извещателей для зданий и сооружений различного назначения, в том числе возводимых в районах с особыми климатическими и природными условиями. Нормы не распространяются на проектирование автоматических установок пожаротушения и пожарной сигнализации: зданий и сооружений, проектируемых по специальным нормам; технологических установок, расположенных вне зданий; зданий складов с передвижными стеллажами; зданий складов для хранения продукции в аэрозольной упаковке; зданий складов лаков, красок, смол, ЛВЖ, ГЖ с высотой складирования грузов более 5,5 м; зданий складов с высотой складирования грузов более 16 м; зданий складов высотой более 10 м с высотой складирования грузов до 5,5 м.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
12/29/1984
SKU: RUSS18819
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.21 Fire safety »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
к.40 Water supply and sewerage »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.20 Fire fighting equipment »
The Document is Replaced With:
NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules
As a Replacement Of:
SN 75-76: Instructions for the design of automatic fire extinguishing installations
The Document References:
GOST 10704-76: Electric welded longitudinal steel pipes. Assortment
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.026-76: Signal colors and safety signs
GOST 23511-79: Industrial radio frequency interference generated by domestic electrical appliances used in residential buildings, or connected to domestic power sources
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
NPB 22-96: Automatic gas fire fighting facilities. rules and regulations for designing and application
SN 543-82: Instructions for the design of electrical equipment of public buildings of mass construction
SN 75-76: Instructions for the design of automatic fire extinguishing installations
SN 85-74: Instructions for laying cables up to 110 kV
SNiP II-30-76: Internal water supply and sewerage of buildings
SNiP II-4-79: Natural and artificial lighting
SNiP III-34-74: Automation Systems
ST SEV 446-77: Fire Protection Standards for Building Design. Method of Determining Design Fire Loads
The Document is Referenced By:
GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies
GOST R 12.3.047-98: Occupational safety standards system. Fire safety of technological processes. General requirements. Methods of control
GOST R 50680-94: Automatic water fire fighting systems. General technical requirements. Test methods.
GOST R 50800-95: Automatic fire fighting foam systems General technical requirements Test methods
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
ITP 52-89: Instructions for the design of enterprises for the primary processing of flax
M788-1076: Fire Safety Design Manual for Electrical Rooms and Cable Structures Within Industrial Occupancies
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MGSN 4.06-96: Manual for MGSN 4.06-96 "Educational institutions"
Manual for MGSN 5.01-94*: Manual for MGSN 5.01-94 * "Parking of cars"
Manual for RD 78.145-93: Manual for the guiding document "Systems and complexes of security, fire and security-fire alarms. Rules for the production and acceptance of work"
Manual for SNiP 2.04.05-91: Benefit 5.91. Placement of ventilation equipment.
Manual for SNiP 2.04.05-91: Benefit 7.91. Duct layouts in a building
Manual for SNiP 2.04.05-91: Allowance 6.91. Fire resistant ducts.
Manual for SNiP 2.04.05-91: Benefit 2.91. Calculation of the receipt of heat of solar radiation in the premises
Manual for SNiP 2.04.05-91: Allowance 13.91. Fire protection requirements for heating, ventilation and air conditioning systems
Manual for SNiP 2.04.05-91: Benefit 8.91. The number of personnel operating heating, ventilation and air conditioning systems
Manual for SNiP 2.04.05-91: Manual 10.91 Designing Corrosion Protection
Manual for SNiP 2.04.05-91: Manual 1.91 Calculation and Distribution of Supply Air
Manual for SNiP 2.04.05-91: Allowance 12.91. Recommendations for calculating outdoor air infiltration in one-story industrial buildings
Manual for SNiP 2.04.05-91: Benefit 9.91. Annual energy consumption by heating, ventilation and air conditioning systems
Manual for SNiP 2.04.05-91: Manual 4.91. Smoke protection in case of fire
Manual for SNiP 2.04.05-91: Allowance 14.91. New schemes and solutions for smoke protection of staircase elevators of multi-storey buildings
Manual for SNiP 2.04.05-91: Allowance 15.91. Smoke protection in case of fire and ventilation of underground car parks
Manual for SNiP 2.04.05-91: Benefit 3.91. Fan units
Manual for SNiP 2.08.02-89: Health Facility Design Guide
Manual for SNiP 2.08.02-89: Club Design
Manual for SNiP 2.08.02-89: Pool Design
Manual for SNiP 2.08.02-89: Design of educational complexes and centers
Manual for SNiP 2.08.02-89: Design of catering facilities
Manual for SNiP 2.08.02-89: Designing Higher Educational Institutions and Continuing Education Institutions
Manual for SNiP 2.08.02-89: Designing consumer services enterprises
Manual for SNiP 2.08.02-89: Design of warning and evacuation systems for people during fires in public buildings
Manual for SNiP 2.08.02-89: Design of vocational, secondary special educational institutions and educational combines
Manual for SNiP 2.08.02-89: Design of kindergartens
Manual for SNiP 2.08.02-89*: Retail Design
Manual for SNiP 2.08.02-89*: Theater Design
Manual for SNiP 2.08.02-89*: Design of gyms, facilities for fitness classes and indoor ice rinks with artificial ice
Manual for SNiP 21-01-97: Fire Prevention
MDS 11-3.99: Recommended Practice for Conformity Assessment of Feasibility Studies (Projects) for Construction of Nonindustrial Facilities
MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures
MDS 21-3.2001: Method for and Examples of Feasibility Study for Fire Protection Measures for SNIP 21-01-97*
MDS 80-8.2000: Recommended Practice for Development of Technical Part of Bidding Documentation and Bidder Offer
MGSN 3.01-01: Residential buildings
MGSN 3.01-96: Residential Buildings
NPB 104-95: Design of Public Fire Warning Systems in Buildings and Structures
NPB 108-96: Structures Occupied for Religious Purposes. Fire Protection Requirements
NPB 110-96: The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing and fire detection installation
NPB 110-99: The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing units and automatic fire alarm
NPB 111-98*: Gas stations. Fire safety requirements
NPB 21-94: Systems for aerosol fire-fighting. Temporary norms and standards for design and operation.
NPB 21-98: Automatic gas-aerosol fire extinguishing installations. Standards and Rules of design and application
NPB 22-96: Automatic gas fire fighting facilities. rules and regulations for designing and application
NPB 56-96: Automatic Impulse Dry Chemical Fire Extinguishing Systems. Interim Requirements for Design and Operation
NPB 78-99: Automatic gas fire extinguishing systems. Isothermal reservoirs. General technical requirements. Testing methods.
NPB 79-99: Automatic gas fire extinguishing systems. Distribution valves. General technical requirements. Test methods
NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules
NTP 53-91: Norms of technological design of production of mayonnaise
NTP-APK 1.10.03.001-00: Engineering Design Standards for Sheep Breeding Facilities
NTP-APK 1.10.05.001-01: Engineering Design Standards for Poultry Raising Facilities
NTP-APK 1.10.12.001-02: Engineering Design Standards for Facilities for Storage and Processing of Potatoes and Fruit and Vegetable Products
NTP-APK 1.10.13.001-03: Norms of technological design of warehouses of solid mineral fertilizers and chemical ameliorants
NTP-APK 1.10.13.002-03: Technological design norms for warehouses of liquid matters for chemicalization
NTP-APK 1.10.13.003-03: Technological design standards for pesticide stores
NTP-APK 1.10.14.001-01: Standards for technological design of astrakhan preprocessing centers
NTPD-90: Norms of technological design of diesel power plants
ONTP 01-86: All-Union standards for the technological design of engineering, instrument-making and metal-working enterprises. Forge and press shops
ONTP 02-85: National Engineering Design Standards for Lumbering Facilities
ONTP 08-96: Sectoral norms of technological design of enterprises in the automotive industry. Workshops for the repair of sanitary and heat power equipment
ONTP 10-99: Classification of buildings and premises of enterprises by explosion and fire hazards. Fire safety requirements
ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)
ONTP 14-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises (refinement of ONTP-14-93). Mechanical processing assembly shops
ONTP 1-86: All-union regulations of technological engineering of liquefied petroleum gas extraction plants
ONTP 2-87: All-Union standards for technological design of plastics processing facilities. II part
OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval
PB 05-351-00: Rules for the examination of industrial safety of projects of fire protection of coal mines, hazardous production facilities of the coal industry
PB 08-83-95: Requirements for the Organization and Safe Operation of Underground Storage Facilities for Natural Gas in Salt Deposits
POT R M-013-2000: Industry-Wide Occupational Safety and Health Requirements for Chemical Cleaning and Washing
POT R M-017-2001: Inter-Industry Occupational Safety and Health Regulations for Painting Operations
POT R M-026-2003: Intersectoral rules on labor protection during the operation of gas facilities of organizations
POT R M-027-2003: Intersectoral rules on labor protection in road transport
POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
POT R O-112-001-95: Rules for labor protection during the operation of oil depots and gas stations
POT R O-200-01-95: Rules on labor protection in automobile transport
POT R O-97300-05-95: Rules for labor protection in food concentrate and vegetable drying industries of the food industry
PPB 0-148-87: Fire Safety Regulations for Sporting Facilities
PPB-153-90: Fire Safety Regulations for Refugee Camps
PPBO-07-91: Fire Safety Regulations for Health Care Facilities
PPBO-105-87: Fire Safety Regulations for Institutions, Organizations, and Companies Administered by the USSR Academy of Sciences
PPBO-157-90: Fire Safety Regulations in the Timber Industry
R 78.36.001-99: Recommended Practices for Using Modern Fire Alarm Systems to Protect Churches
R 78.36.003-99: Recommended Practices for Equipping Banks, Currency Exchanges, Firearms Stores, Jewelry Stores, Commercial and Other Companies and Organizations with Integrated Security Equipment, Video Surveillance Equipment, and Complete Facility Protection Systems. T
R 78.36.007-99: Selection and Use of Security and Fire Alarm Systems and Equipment for Facility Protection. Recommended Practice
R 78.36.008-99: Design and Installation of Security Intercom and Closed Circuit Television Systems. Recommended Practice
R 78.36.010-2000: Engineering and technical protection of non-telephone objects
R 78.36.011-2000: Organization of work of points of centralized protection
RD 009-01-96: Automatic Fire Protection Systems. Maintenance Requirements
RD 05-365-00: Instructions for the development of a project of coal mine fire protection
RD 05-366-00: Instructions for the design of fire-irrigation water supply
RD 09-241-98: Methodological guidelines for inspection of technical condition and operational safety of ammonia refrigerating plants.
RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities
RD 153-39.4-056-00: Main crude pipeline. Operations rules.
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD 153-39.4-087-01: Automation and Telemetry Systems for Petroleum Trunk Pipelines. Basic Provisions
RD 153-39.4-113-01: Standards for technological design of main pipelines
RD 25.952-90: Automatic fire extinguishing, fire, burglar and security alarm systems. Procedure for technical design assignment development
RD 31.3.05-97: Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 3112199-1069-98: Fire safety requirements for companies operating vehicles on compressed natural gas
RD 34.20.161: Standards for Design of Process Section of Hydroelectric Generating Stations and Hydroelectric Pumped Storage Power Plants
RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97
RD 34.49.104-91: Recommendations for the design of automatic water extinguishing systems for oil power transformers
RD 39-135-94: Norms for technological design of gas-processing plants
RD 45.120-2000: Engineering standards. Urban and rural telephone networks. НТП 112-2000.
RD 45.162-2001: Complexes of cellular and satellite mobile communication public networks.
RD 78.143-92: Security alarm systems and sets elements of technical reinforcement of sites, design standards
RD 78.145-93: Guiding document systems and complexes of security, fire and security and fire alarm rules for execution and acceptance of work
RD 78.147-93: Common requirements to technical strengthening and alarm equipment of guarded objects
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RM 25 951-90: APCS. Tasks for the general designer to design in adjacent parts of the automation project. Part 3. Premises for automated process control systems and automation systems. Cable facilities. Openings and embedded devices
RM 78.36.001-99: Engineers' and Electricians' Guide to Security Alarm and Fire Alarm Systems
RM 78.36.002-99: Procedure for Inspection of Facilities to be Placed Under Security. Procedural Manual
RMG 116-2011: State system for ensuring the uniformity of measurements. Tanks of main oil lines and oil storage depots. Maintenance operations and metrological assurance under operating conditions
RND 73-45-89: Temporary design guide for fire alarm systems and people evacuation control in case of fire of facility of national economy
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
SNiP 2.11.01-85: Storage buildings
SNiP 2.11.03-93: Storage of petroleum and petroleum products. Fire safety norms.
SNiP 2.11.06-91: Timber Storage Facilities. Fire Protection Design Standards
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
SO 34.20.514-2005: Guidelines for the operation of the gas economy of thermal power plants
SO 34.23.501-2005: Guidelines for the operation of fuel oil facilities of thermal power plants
SP 11-107-98: Procedure of Development and Composition of the “Engineering and Technical Measures of Civil Defense. Measures for Prevention of Emergencies” Section of Construction Projects
SP 12-95: Instructions for the design of objects of internal affairs bodies (police) of the Ministry of Internal Affairs of Russia
SP 21-104-98: Design of the systems of fire protection for tank farms
SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85
STA 25.03.02-2004: Combined security system
STN Ts 01-95: 1520-mm Gauge Railways
TSN 12-310-97 SO: Underground facilities
TSN 21-301-2001: Passenger Motor Vehicle Parking Facilities
TSN 21-301-96: Passenger Vehicle Parking Facilities
TSN 21-302-2000: Requirements for Installation and Operation of Fire Alarm Devices and Electric Power Emergency Disconnect Means. Design of Refuse Removal Systems and Automatic Fire Suppression Systems for Refuse Chutes in Residential, Public, and Utility Occupancies
TSN 31-304-95: Many-function building and complexes
TSN 31-306-96: General education institutions
TSN 31-307-96: Preschool institutions
TSN 31-309-98: Car parks. Design Standards. Nizhny Novgorod
TSN 31-310-98: Mass-Application Physical Education and Health Improvement Facilities
TSN 31-311-98: Buildings for Social Security Institutions
TSN 31-312-98: Local construction normatives. Bank buildings
TSN 31-314-98: Educational Institutions for Orphans and Children Without Parental Care
TSN 31-315-99: Relail trade enterprises
TSN 31-316-99: Local construction normatives. Hotels
TSN 31-317-99: Cultural and entertainment facilities
TSN 31-319-99: Consumer services enterprises
TT 78.36.001-99: Standard requirements for technical resistance against burglary and equipment of trading enterprises with alarm system
TT 78.36.002-99: Standard Requirements for the Protection with Equipment and Alarm Systems of Buildings Used for Amusement, Entertainment, and Recreation Purposes and Have No Historical and Architectural Landmark Status
VNP-001-95: Departmental design standards. Buildings of institutions of the Central Bank of the Russian Federation
VNTP 01/87/04-84: Objects of gas and oil industry, made with the use of block and block-complete devices. Engineering Design Standards
VNTP 01-86: Industrial-Specific Engineering Design Standards for Distribution Warehouses and Storage Facilities
VNTP 02-92: Norms of technological design of bakery industry enterprises. Part II Bakeries
VNTP 02-92: Norms of technological design of bakery industry enterprises. Part I. Bakeries
VNTP 03/170/567-87: Fire Safety Standards In Designing Oil and Gas Production Facilities of West- Siberian Sector
VNTP 03-86: Industry-Specific Engineering Design Standards for Cold-Storage Distribution Warehouses
VNTP 03-91: Departmental standards of technological design of sugar beet factories. Volume 2, Part 1. Appendices
VNTP 04-94: Engineering Design Standards for Wine Bottling Plants
VNTP 10-91: Engineering Design Standards for Breweries
VNTP 10M-93: Engineering Design Standards for Microbreweries
VNTP 11-93: Engineering Design Standards for Facilities for the Production of Barley Brewer's Malt
VNTP 12-94K: Engineering Design Standards Facilities of the Canned Fruits and Vegetables Industry
VNTP 13-2-93: Norms of technological design of mining enterprises of metallurgy with underground mining method
VNTP 18-93: Standards for technological design of margarine production
VNTP 20m-93: Engineering Design Standards for Small-Capacity Facilities for the Production of Vegetable Oil, Sunflower Oil, and Rapeseed Oil Produced by Pressing
VNTP 21-92: Standards for technological design of enterprises of the confectionery industry
VNTP 26-94: Standards for technological design of sparkling wine factories (production of Soviet champagne using a continuous tank method)
VNTP 311-98: Departmental standards of technological design. Postal facilities
VNTP 34-93: Engineering Design Standards for Alcohol Industry Facilities
VNTP 35-93: Engineering Design Standards for Alcoholic Beverage Plants/Distilleries
VNTP 36-92: Standards of technological design of enterprises of the food concentrate industry
VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
VNTP 40-91: Engineering Design Standards for Nonalcoholic Beverage Plants (Shops)
VNTP 51-1-88: Industry norms of technological design of Installations for Production and Storage of Liquefied Natural Gas, Isothermal Storages and Gas Filling Stations
VNTP 52-91: Departmental norms of technological design of warehouses of vegetable oils and fats of oil and fat enterprises
VNTP 5-95: Norms of technological design of enterprises for provisioning with petroleum products (petroleum storage depots)
VNTP 81-85: Norms of technological design for petroleum-refining and organic synthesis products manufacture enterprises
VNTP-88: Departmental norms of technological design of washing and steaming stations
VSN 01-91: Railway stations for passengers of direct communication. Design Standards
VSN 12-87/MMF: Crude oil and oil product handling berth facilities. Fire protection. Design practice
VSN 13-94: Instructions for the design of fire and explosion hazardous production of alcohol, alcoholic beverage and brandy enterprises of the food industry
VSN 21-02-01/MO RF: Automatic gas fire extinguishing installations of the armed forces of the Russian Federation. Norms and design rules
VSN 25-09.67-85: Execution and Acceptance Requirements. Automatic Fire Suppression Systems
VSN 25-09.68-85*: Regulations for execution and acceptance of works. Installations of security, fire and security-fire alarm systems
VSN 33-2.2.12-87: Irrigation and Drainage Systems and Structures. Pumping Stations. Design Standards
VSN 47-85/USSR Ministry of Energy: Design standards for automatic water fire extinguishing installations for cable structures
VSN 52-89: Industry-Specific Design Standards for Office and Accessory Buildings and Rooms for Livestock and Poultry Raising Businesses
VSN 60-89: Communications Devices, Alarm and Remote Control Systems for Building Services Equipment Used in Residential and Public Buildings. Design Standards
VSN 64-064-88: Instructions for the construction design of the medical and microbiological industry
VSN AV-PAS-94: Bus stations and passenger bus stations
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.