imgalt

GOST 11383-75

ГОСТ 11383-75

Thin-walled copper and brass tubes

Трубки медные и латунные тонкостенные

Status: Not effective - Superseded. Information about the registration of 881-st dated July 26, 2016 (official website of Rosstandart); IUS 1-2017

The standard applies to round drawn thin-walled tubes made of copper and brass, used in various industries.

Стандарт распространяется на круглые тянутые тонкостенные трубки из меди и латуни, применяемые в различных отраслях промышленности.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 12/31/1975

SKU: RUSS18835

Price: $398.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.15 Non-ferrous metal pipes »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.15 Pipes from non-ferrous metals »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V6 Pipes metal and pipe products » V64 Pipes from non-ferrous metals and alloys »

National Standards for OKSTU » ROLLED STEEL, NON-FERROUS METALS » Copper rolled metal »

National Standards for OKSTU » ROLLED STEEL, NON-FERROUS METALS » Rolled brass »


The Document is Replaced With:

GOST 11383-2016: Thin-walled copper and brass tubes. Specification

As a Replacement Of:

GOST 11383-65: Thin-walled copper and brass tubes

The Document References:

GOST 10006-80: Metal pipes

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 11383-65: Thin-walled copper and brass tubes

GOST 13938.10-78: Copper. Methods for the determination of antimony

GOST 13938.11-78: Copper. Method for the determination of arsenic

GOST 13938.12-78: Copper. Methods for the determination of bismuth

GOST 13938.13-77: Copper. Methods for the determination of oxygen mass portion

GOST 13938.1-78: Copper. Methods for determination of copper

GOST 13938.2-78: Copper. Methods for determination of sulphur

GOST 13938.3-78: Copper. Method for determination of phosphorus

GOST 13938.4-78: Copper. Methods for determination of iron

GOST 13938.5-78: Copper. Methods for determination of zinc

GOST 13938.6-78: Copper. Methods for the determination of nickel

GOST 13938.7-78: Copper. Methods for the determination of lead

GOST 13938.8-78: Copper. Methods for the determination of tin

GOST 13938.9-78: Copper. Methods for determination of silver

GOST 14192-77: Marking of cargoes

GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types

GOST 1652.10-77: Copper-zinc alloys. Methods for the determination of aluminium

GOST 1652.11-77: Copper-zinc alloys. Methods for the determination of nickel

GOST 1652.12-77: Copper-zinc alloys. Methods for the determination of silicon

GOST 1652.13-77: Copper-zinc alloys. Methods for the determination of phosphorus

GOST 1652.1-77: Copper-zinc alloys. Methods for the determination of copper

GOST 1652.2-77: Copper-zinc alloys. Methods for the determination of lead

GOST 1652.3-77: Copper-zinc alloys. Methods for the determination of iron

GOST 1652.4-77: Copper-zinc alloys. Methods for the determination of manganese

GOST 1652.5-77: Copper-zinc alloys. Methods for the determination of tin

GOST 1652.6-77: Copper-zinc alloys. Methods for the determination of antimony

GOST 1652.7-77: Copper-zinc alloys. Methods for the determination of bismuth

GOST 1652.8-77: Copper-zinc alloys. Methods for the determination of arsenic

GOST 1652.9-77: Copper-zinc alloys. Methods for the determination of sulphur

GOST 21140-88: Containers

GOST 24231-80: Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 25086-87: Nonferrous metals and their alloys. General requirements for methods of analysis

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 3560-73: Sealing tepe

GOST 6507-90: Micrometers. Specifications

GOST 8273-75: Packing paper

GOST 859-78: Copper. Grades

GOST 8695-75: Tubing (pipes). Flattening testing method

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 9557-87: Flat wooden pallets with dimensions 800ґ1200 mm

GOST 9569-79: Paraffin paper

GOST 9716.1-79: Copper-zinc alloys. Method of spectral analysis of metal standard specimens with photographic registration of spectrum

GOST 9716.3-79: Copper-zinc alloys. Method of spectral analysis of oxide specimens with photographic registration of spectrum

GOST 9717.2-82: Copper. Method of spectral analysis of metal standard specimens with photographic registration of spectrum

GOST 9717.3-82: Copper. Method of spectral analysis of oxide standard specimens

The Document is Referenced By:

GOST 11326.0-78: Radio-frequency cables

GOST 12644-80: Hollow and semi-hollow rivets. Specifications

GOST 13649-79: Spring lugs for the wrist watch cases. Design and sizes

GOST 17100-79: Caps for light sources. Specifications

GOST R 54857-2011: Buildings and structures. Determination of air change of rooms method of indicator gas

MI 184-79: State system for ensuring uniformity of measurements. Methods of calibration of gas analyzers for hydrogen fluoride

OST 108.271.101-76: Delivery water low-pressure heaters for thermal power plants, heating-industrial and heating boiler houses. Types. Main data. Design and dimensions. Technical requirements.

OST 39-195-86: Oil. Method of determining flood displacement efficiency factor in laboratory.

OST 39-228-89: Water for flooding of oil reservoirs. Assessment of compatibility of injected water with formation water and productive stratum rock.

RD 34.40.503-94: Model Guidelines for Operation System Water Heating Units at Thermal Power Stations and Condensing Electric Power Generating Stations

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!