GOST 24211-91

ГОСТ 24211-91

Concrete additives. General technical requirements

Добавки для бетонов. Общие технические требования

Status: Not effective - Superseded

The standard applies to additives based on inorganic and organic substances for heavy and light concrete, which are bonded for the preparation of which are portland cement clinker-based cements, and establishes requirements for the appointment of additives for concrete, their reliability, resistance to external influences, environmental protection, transportability, and safety with them. The standard does not apply to mineral supplements.

Стандарт распространяется на добавки на основе неорганических и органических веществ для тяжелых и легких бетонов, вяжущим для приготовления которых являются цементы на основе портландцементного клинкера, и устанавливает требования назначения добавок для бетонов, их надежности, стойкости к внешним воздействиям, охраны природы, транспортабельности, безопасности работы с ними. Стандарт не распространяется на минеральные добавки.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 17

Approved: State Committee of the Council of Ministers of the USSR for Construction, 10/9/1991

SKU: RUSS18863

Price: $169.29




The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.10 Cement. Gypsum. Lime. Building mixture »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.10 Cement. Gypsum. Lime. Building mixture »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh12 Cementing materials »

National Standards for OKSTU » CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS » Natural chalk. Raw materials for the production of binding materials, limestone and dolomite flour and raw gypsum »


The Document is Replaced With:

GOST 24211-2003: Additives for concretes and mortars. General specifications

As a Replacement Of:

GOST 24211-80: Concrete additives. Classification

The Document References:

GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications

GOST 10690-73: Technical potassium carbonate (potash). Technical conditions

GOST 10834-76: Hydrophobizing liquid 136-41. Specifications

GOST 10935-82: Freight box cars of mainline railways, gauge 1520 mm, technical requirements

GOST 11159-76: Ferric chloride technical

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 12.4.028-76: Respirators шб-1 "lepestok"

GOST 12.4.029-76: Special aprons

GOST 12.4.072-79: Special, rubber, molded boots protecting from water, petroleum oils, and mechanical effects

GOST 12.4.099-80: Women's overalls for protection against non-toxic substances, mechanical damage and general industrial contamination

GOST 12.4.100-80: Man's overalls for protection against non-toxic dust, mechanical effects and general industrial contaminations. Specifications

GOST 12.4.121-83: Industrial filtering gas-masks

GOST 12.4.131-83: Women’s smock-frocks

GOST 12.4.132-83: Overalls for men

GOST 12.4.133-83: Chamber gloves

GOST 12.4.153-85: Occupational safety standards system. Goggles. Nomenclature of quality indices

GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications

GOST 13830-91: Edible salt

GOST 13950-91: Welded and folded steel barrels

GOST 14192-77: Marking of cargoes

GOST 17811-78: Polyethylene bags for chemical products. Specifications

GOST 18573-86: Wooden boxes for the production of chemical industry

GOST 18677-73: Seals. Design and dimensions

GOST 18896-73: Steel thick-walled drums for chemical products. Specifications

GOST 19433-88: Dangerous goods. Classification and marking

GOST 19906-74: Sodium nitrite technical. Technical conditions

GOST 201-76: Trisodium phosphate. Technical conditions

GOST 2081-92: Carbamide

GOST 21089-75: Quick detachable pushers for chill moulds with fluid cooling. Construction and dimensions

GOST 21398-89: Trucks. General technical requirements

GOST 2226-88: Paper bags

GOST 26155-84: Barrels from corrosion-resistant steel

GOST 2651-78: Sodium bichromate technical. Technical conditions

GOST 2652-78: Potassium bichromate technical. Technical conditions

GOST 27574-87: Women’s suits for protection against general industrial pollution and mechanical effects

GOST 27575-87: Men's suites for protection from general occupational pollution and mechanical effects

GOST 27651-88: Women's suits for protection against mechanical damage, water and alkalis

GOST 27652-88: Men's acid-protection overalls

GOST 27653-88: Costumes mens for protection against mechanical effects, water and alkalis

GOST 27654-88: Women wear for acid protection

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 4142-77: Reagents. Calcium nitrate tetrahydrate. Specifications

GOST 4147-74: Reagents. Ferric chloride hexahydrate. Specifications

GOST 4148-78: Reagents. Ferrous (II) sulphate 7-aqueous. Specifications

GOST 450-77: Calcium chloride technical. Technical conditions

GOST 5044-79: Thin-walled steel drums for chemical products

GOST 5494-71: Pegmentary aluminium powder

GOST 5799-78: Flasks for paints and varnishes. Specifications

GOST 6128-81: Metal cans for chemical products

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 6318-77: Sodium sulfate technical. Technical conditions

GOST 8429-77: Borax. Technical conditions

GOST 8433-81: Auxiliary substances OП-7 and OП-10. Specifications

GOST 9338-80: Plywood drums. Specifications

GOST 9485-74: Reagents. Ferric sulphate 9-aqueous. Specifications

GOST 9980.3-86: Paint materials. Packing

GOST 9980.5-86: Paint materials. Transportation and storage

The Document is Referenced By:

GOST 17608-91: Footway concrete slabs. Specifications

GOST 24211-2003: Additives for concretes and mortars. General specifications

GOST 25820-2000: Lightweight aggregates concretes. Specifications

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 28013-89: Mortars. General specifications

GOST 30459-96: Concrete additives

GOST 6133-99: Concrete wall stone. Specifications

GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications

GOST R 51263-99: Concrete with polysterene aggregates. Specifications

Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities

Manual for SNiP 3.09.01-85: Manual for heliothermal processing of concrete and reinforced concrete products using SVITAP coatings

Manual for SNiP 3.09.01-85: Manual for heliothermal treatment of concrete and reinforced concrete products using film-forming compounds

Manual for SNiP 3.09.01-85: Manual on the use of chemical additives in the production of precast concrete structures and products

Manual for SNiP 3.09.01-85: Manual for the heat treatment of precast concrete structures and products

Manual for SNiP 3.09.01-85: The technology of manufacturing reinforced concrete pressure pipes with a steel core

Manual for SNiP 3.09.01-85: Manual for the heat treatment of reinforced concrete products with natural gas combustion products

Manual for SNiP 3.09.01-85: Production of prefabricated self-reinforced concrete structures and products

Manual for SNiP 3.09.01-85: Reinforced concrete molding technology manual

MGSN 2.08-01: Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings

OSN-APK 2.10.32.001-04: Instructions for the use of chemical additives in concrete and mortars for rural construction

RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities

RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures

RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet

RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber

SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules

SNiP 82-02-95: Federal (standard) element cement consumption rates at manufacture of concrete and reinforced concrete products and structures

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 82-101-98: Preparation and use of masonry mortars. To replace SN 290-74. Letter № AB-20-218 / 12 dated 06.17.98.

STB 1081-97: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Technical conditions

TR 121-01: Technical recommendations for mastic waterproofing of the internal surfaces of the underground part of buildings and structures

TR 122-01: Technical recommendations on plastering technology inside buildings

TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures

TSN 52-302-2003: Corrosion Protection of Concrete and Reinforced Concrete Structures of Transport Facilities

TU 102-264-81: Weighted reinforced concrete modular ring. UTK type for main pipelines

TU 102-421-86: Concrete wading weights type 1 UBKM

TU 102-737-95: Concrete marsh weighting compounds wedge-shaped for pipes with a diameter of 426, 325, 219 (ZUBKm)

TU 5741-004-18576628-99: Stones concrete wall

TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab

TU 5745-001-42806964-97: Dry Non-Shrink Mixture Monofleks-A

TU 5760-160-00284807-96: Polystyrene Concrete Thermal Insulating Slabs. Technical Specifications

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

VSN 46-96: Instruction on preparation and use of concrete with sodium nitrite additive in winter conditions

VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures

VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation

VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Hot-rolled sheet. Range
Language: English
Price: $72.27
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!