imgalt

SanPiN 2.2.4.1191-03

СанПиН 2.2.4.1191-03

Physical factors of the production environment. Electromagnetic fields in production environment

Физические факторы производственной среды. Электромагнитные поля в производственной среде

Status: Not effective - No longer valid. By the Decree of the Chief State Sanitary Doctor of the Russian Federation of June 21, 2016 No. 81 "On approval of SanPiN 2.2.4.3359-16" Sanitary and epidemiological requirements for physical factors in the workplace "

Sanitary regulations establish sanitary and epidemiological requirements for the conditions of industrial effects of EMF, which must be observed in the design, reconstruction, construction of production facilities, in the design, manufacture and operation of domestic and imported technical means that are sources of EMF

Санитарные правила устанавливают санитарно-эпидемиологические требования к условиям производственных воздействий ЭМП, которые должны соблюдаться при проектировании, реконструкции, строительстве производственных объектов, при проектировании, изготовлении и эксплуатации отечественных и импортных технических средств, являющихся источниками ЭМП

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Chief State Sanitary Doctor of the Russian Federation, 1/30/2003

SKU: RUSS18910

Price: $295.00

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of supervisory authorities » Normative documents of State Committee for Sanitary and Epidemiological Supervision and Ministry of Health of Russian Federation »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » I Environmental-legal and economic-legal mechanisms for environmental protection » 1 Management infield of environmental protection and environmental management » 1.5 Environmental monitoring and control »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 6 Protection against electromagnetic radiation » 6.1 Non-ionizing electromagnetic fields and radiation »

ISO classifier » 33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT » 33.100 Electromagnetic Compatibility (EMS) » 33.100.20 Security »


The Document is Replaced With:

SanPiN 2.2.4.3359-16: Sanitary and epidemiological requirements for physical factors in the workplace

As a Replacement Of:

SanPiN 2.2.4.723-98: Power frequency magnetic field (50 Hz) in occupational environment

SanPiN 2.2.4/2.1.8.055-96: Physical Factors of the Industrial Environment. Physical Factors of the Ambient Medium Radiofrequency electromagnetic radiation (rf emr) Radiofrequency electromagnetic radiation (rf emr) under occupational and living conditions

The Document References:

GOST 12.1.002-84: Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control

GOST 12.1.045-84: Occupational safety standards system. Electrostatic fields. Tolerance levels and methods of control at working places

GOST 12.4.023-84: Protective face shields

GOST 12.4.124-83: Occupational safety standards system. Means of static electricity protection. General technical requirements

GOST 12.4.154-85: Occupational safety standards system. Screening devices for protection from power frequency fields. General technical requirements. Basic parameters and dimensions

GOST 12.4.172-87: Individual screening set for protection from power frequency fields

GOST R 51070-97: Voltages instruments of electrical and magnetic fields. General technical requirements and methods of tests

POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations

R 2.2.755-99: Hygienic Criteria for Evaluation and Classification of Labor Conditions by Indexes of Harmfulness and Danger of Industrial Environment and Working Process Difficulty and Intensity

SanPiN 2.2.2.542-96: Hygienic requirements to videodisplay terminals, personal electronic computers and work organization. Sanitary rules and norms

SanPiN 2.2.4.723-98: Power frequency magnetic field (50 Hz) in occupational environment

SanPiN 2.2.4/2.1.8.055-96: Physical Factors of the Industrial Environment. Physical Factors of the Ambient Medium Radiofrequency electromagnetic radiation (rf emr) Radiofrequency electromagnetic radiation (rf emr) under occupational and living conditions

The Document is Referenced By:

GOST 32320-2013: Anti-theft protection technical means and systems. General requirements and test methods

GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection

GOST R 12.4.292-2013: Occupational safety standards system. Shielding set for personal protection from radiofrequency electromagnetic field exposure. General technical requirements

GOST R 53237-2008: Fiber glass. General requirements for safety in the course of Production and Application

GOST R 53624-2009: Information technology. Software. Quality management systems. Requirements

GOST R 54964-2012: Conformity assessment. Ecological requirements for estate properties

GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications

GOST R 55260.2.1-2012: Hydro power plants. Part 2-1. Hydrotreaters. Procurement specification

GOST R 55815-2013: Safety of and facilities. Methods of investigations and electromagnetic radiation level estimation in the context of communication objects designing

GOST R 56000-2014: Petroleum and natural gas industry. Offshore production units. Operations in arctic conditions. General requirements

GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes

GOST R 58215-2018: Oil and gas industry. Arctic operations. Work environment

GOST R 8.629-2007: State system for ensuring the uniformity of measurements. Nanometre range relief measures with trapezoidal profile of elements. Methods for verification

GOST R 8.630-2007: State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Methods for verification

GOST R 8.631-2007: State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for verification

GOST R 8.635-2007: State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for calibration

GOST R 8.636-2007: State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for calibration

GOST R 8.697-2010: State system for ensuring the uniformity of measurements. Interpenar spacings in crystals. Method for measurement by means of a transmission electron microscope

GOST R 8.700-2010: State system for ensuring the uniformity of measurements. Method of surface roughness effective height measurements by means of scanning probe atomic force microscope

Letter 11218/05-SM: On the application of regulatory and methodological documents

Manual: Manual for impulse and low consumption fire extinguishing systems

MR 02.007-06: The use of ultra-high frequency electromagnetic radiation to disinfect infected medical waste

MUK 4.3.2491-2009: Hygienic assessment of electric and magnetic fields of industrial frequency (50 Hz) under production conditions

POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive

PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Applications

PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)

R 2.2.2006-05: Guide on Hygienic Assessment of Factors of Working Environment and Work Load. Criteria and Classification of Working Conditions

RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg

SanPiN 2.1.3.2630-10: Sanitary and epidemiological requirements for organizations engaged in medical activities

SanPiN 2.1.8/2.2.4.1383-03: Hygienic requirements for allocation and exploitation of transmitting radio communication equipment

SanPiN 2.1.8/2.2.4.2489-09: Hypogeomagnetic fields in industrial, residential and public buildings, and facilities

SanPiN 2.2.4.1329-03: Requirements for Protection of Personnel Against the Effect of Pulsed Electromagnetic Fields

SanPiN 2.4.6.2553-09: Sanitary and epidemiological requirements for the safety of working conditions for workers under the age of 18

SanPiN 2.5.2/2.2.4.1989-06: Electromagnetic fields on floating facilities and offshore structures. Hygienic safety requirements

SNiP 32-02-2003: Subways

SP 120.13330.2011: Subways

SP 120.13330.2012: Subway systems

SP 151.13330.2012: Engineering site investigations for nuclear power plants construction

SP 2.2.1.1312-03: Occupational hygiene enterprise designing building reconstruction and maintenance. Hygienic requirements to the designing of new and reconstructible industrial enterprises

SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument

SP 225.1326000.2014: Station buildings, structures and devices

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English
Price: $79.00
imgalt
Armour clothes. Classification and general technical requirements
Language: English
Price: $189.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $169.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Hotels design
Language: English
Price: $1,698.24
imgalt
Railroad rails. General specifications
Language: English
Price: $1,813.00
imgalt
Potassium chloride
Language: English
Price: $159.00
imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!