imgalt

GOST 10181-2000

ГОСТ 10181-2000

Concrete Mixtures Test method

Смеси Бетонные Методы испытаний

Status: Not effective - Superseded. Registration information 1972-st dated 12/12/2014 (Rosstandart official website) (IUS 7-2015)

This standard applies to concrete mixes for the preparation of heavy, fine-grained and lightweight concrete, and establishes the rules for sampling and methods for determining workability, medium density, porosity, stratification, temperature and persistence properties of concrete mix.

Настоящий стандарт распространяется на бетонные смеси для приготовления тяжелого, мелкозернистого и легкого бетонов и устанавливает правила отбора проб и методы определения удобоукладываемости, средней плотности, пористости, расслаиваемости, температуры и сохраняемости свойств бетонной смеси.Стандарт не распространяется на смеси для приготовления крупнопористых бетонов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of Russia, 12/14/2000

SKU: RUSS18916

Price: $558.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.10 Cement. Gypsum. Lime. Building mixture »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.10 Cement. Gypsum. Lime. Building mixture »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh19 Test methods. Packaging. Marking »

National Standards for OKSTU » CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS » Control methods (testing, analysis, measurements) »

National Standards for OKSTU » REINFORCED CONCRETE STRUCTURES AND PARTS (INCLUDING REINFORCED CONCRETE CONCRETE PRODUCTS) » Concrete and mortars »


The Document is Replaced With:

GOST 10181-2014: Concrete mixtures. Methods of testing

As a Replacement Of:

GOST 10181.0-81: Concrete mixtures. General requirement to test methods

GOST 10181.1-81: Concrete mixture. Test method of determination of workability

GOST 10181.2-81: Concrete mixture. Test method of determination of density

GOST 10181.3-81: Concrete mixture. Test method of determination of porosity

GOST 10181.4-81: Concrete mixtures. Test methods of determination of segregatability

The Document References:

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10181.0-81: Concrete mixtures. General requirement to test methods

GOST 10181.4-81: Concrete mixtures. Test methods of determination of segregatability

GOST 13646-68: Glass mercury thermometers designed for precise measurements

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 22685-89: Moulds for making control specimens of concrete. Specifications

GOST 23932-90: Laboratory glassware and equipment. General specifications

GOST 24104-88: General purpose and reference laboratory balances

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 310.2-76: Cements. Methods of grinding fineness determination

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 7473-94: Ready-mixed concrete. Specifications

GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST 8735-88: Sand for construction work. Testing methods

GOST 9533-81: Trowels, tuck pointing tools. Specifications

GOST 9758-86: Non-organic porous aggregates for construction work

Order 970: Administrative Regulations on rendering by the Federal Agency on Technical Regulation and Metrology of the state service on type approval of certified reference materials or type of measuring instruments

The Document is Referenced By:

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications

GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications

GOST 17079-88: Reinforced concrete blocks for ventilation. Specifications

GOST 17608-91: Footway concrete slabs. Specifications

GOST 18105-86: Concretes. Rules for the strength control

GOST 20910-90: Refractory concretes. Specifications

GOST 21506-2013: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications

GOST 21924.0-84: Reinforced-Concrete Slabs for Urban Road Pavements. Specifications

GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements

GOST 25697-83: Reinforced concrete slabs for balconies and loggias. General specifications

GOST 25820-2000: Lightweight aggregates concretes. Specifications

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 27215-2013: Reinforced concrete ribbed floor slabs of 400 mm depth for industrial buildings. Specifications

GOST 27339-2016: Truck mixer. General specifications

GOST 28042-2013: Reinforced concrete roofing slabs for industrial buildings. Specifications

GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency

GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency

GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications

GOST 31357-2007: Dry bulding cement binder mixes. General specifications

GOST 31358-2007: Dry building flooring cement binder mixes. Specifications

GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST 31914-2012: High-strength heavy-weight and fine-grane concrete for situ-casting structures. Rules for control and quality assessment

GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 32415-2013: Pressure thermoplastic pipes and their fittings for water supply and heating systems. General specifications

GOST 32488-2013: Exterior wall panels of claydite-concrete for residential and public buildings. Specificatiоns

GOST 32499-2013: Reinforced concrete multihollow slabs for floors in buildings for span to 9 m stand moulding. Specifications

GOST 32803-2014: Self-stressing concrete. General specifications

GOST 32956-2014: Public roads. Trays for road drainage. Methods of control

GOST 33370-2015: Staple chemical fibres for reinforcement of building materials and structures. General specifications

GOST 5802-86: Mortars. Test methods.

GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications

GOST 7473-2010: Fresh concrete. Specifications

GOST 7473-94: Ready-mixed concrete. Specifications

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST 9758-86: Non-organic porous aggregates for construction work

GOST ISO 18650-2-2016: Building construction machinery and equipment. Concrete mixers. Part 2. Method for testing the effectiveness of mixing

GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods

GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications

GOST R 51263-99: Concrete with polysterene aggregates. Specifications

GOST R 52541-2006: Refractory castables. Preparation of test pieces

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications

GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications

GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications

Instruction 23-02: Instruction on transportation and pouring of concrete in monolithic constructions by means of transit concrete mixers and concrete pumpers

Manual: Manual for impulse and low consumption fire extinguishing systems

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3

MI 2488-98: Recommended Practice. National Measurement Standards. Method for Accelerated Determination of Water-to-Cement Ratio and Prediction and Monitoring Strength of Cement From its Shrinkage

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

ODM 218.2.023-2012: Recommendations for the use of fast-hardening materials for the repair of cement concrete pavements

ODM 218.2.035-2013: Recommendations for the use of fly ash in concrete foundations of roads

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

ODM 218.3.012-2011: Cements for concrete coatings and road foundations

ODM 218.3.015-2011: Guidelines for the construction of cement concrete pavements in sliding forms

ODM 218.3.028-2013: Guidelines for the repair and maintenance of cement concrete pavements of roads

ODM 218.3.036-2013: Recommendations for the technology of rehabilitation of cracks and seams in existing road surfaces

ODM 218.3.037-2014: Recommendations for monitoring the strength of cement concrete pavements and foundations of roads by sample

ODM 218.3.039-2014: Recommendations for testing film-forming materials for the care of freshly laid concrete

ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete

ODM 218.4.003-2009: Recommendations for joining metal beams with a monolithic slab by means of continuous comb stops in steel concrete bridges

R 392-80: Recommendations on the composition and technology of the preparation of very heavy concrete for pipeline weights

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

Recommendations 102-04: Recommendations on concreting of the structures by means of concrete pump when transportation of concrete mixture by concrete mixer trucks

RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings

RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas

RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings

R-NP SRO SSK 02-2015: Recommendations for concrete works in winter period

RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures

RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet

RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber

RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire

RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules

SP 37.13330.2012: Industrial transport

SP 45.13330.2012: Earth structures, bases and foundations

SP 46.13330.2012: Bridges and pipes

SP 50-102-2003: Design and construction of soil bases and foundations for buildings and structures

SP 52-104-2006: Steel fibre reineorced concrete structures

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 78.13330.2012: Automobile roads

STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics

Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement

TR 134-03: Technical recommendations for the installation and commissioning of pavements, taking into account the requirements of international standards for evenness

TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings

TU 102-271-80: Constructions of fine-grained (sandy) concrete for series 123 residential buildings

TU 102-46-75: Weights prefabricated cantilever type UKS

TU 218 RSFSR 620-90: Hard concrete mixes for the construction of cement concrete pavements and foundations of roads and airfields

TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab

TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions

VSN 126-90: Anchored Cast-In-Place Concrete Tunnel Lining for Transportation Tunnels and Subways. Design and Execution Standards

VSN 146-68: Technical Guidelines for the Installation of Shield-Driven Cast-In-Place Concrete Lining

VSN 81-80: Instructions for the manufacture, construction and filling of precast concrete and reinforced concrete culverts

VSN 85-68: Technical Guidelines for the Design and Erection of Span Structures of Road and Urban Street Bridges with Pavement Constructed of Reinforced Concrete Slabs Without Applied Waterproofing

VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation

VSP 32-02-03 MO RF: Rules for the production and acceptance of work in the repair of rigid airfield pavements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!