GOST 14249-89
ГОСТ 14249-89
|
|
Vessels and apparatus. Norms and methods of strength calculation
Сосуды и аппараты Нормы и методы расчета на прочность
Status: Effective - Supersedes. IUS 8-1989
The standard establishes norms and methods for calculating the strength of cylindrical shells, conical elements, bottoms and covers of vessels and apparatus made of carbon and alloyed steels used in chemical, petroleum refining and related industries operating under single and multiple loads under internal overpressure, vacuum or external overpressure and under the action of axial and transverse forces and bending moments, and also sets the values of permissible stresses, modulus longitudinally th elasticity and strength factors of welds.
Стандарт устанавливает нормы и методы расчета на прочность цилиндрических обечаек, конических элементов, днищ и крышек сосудов и аппаратов из углеродистых и легированных сталей, применяемых в химической, нефтеперерабатывающей и смежных отраслях промышленности, работающих в условиях однократных и многократных нагрузок под внутренним избыточным давлением, вакуумом или наружным избыточным давлением и под действием осевых и поперечных усилий и изгибающих моментов, а также устанавливает значения допускаемых напряжений, модуля продольной упругости и коэффициентов прочности сварных швов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
5/18/1989
SKU: RUSS18931
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
71 Chemical industry »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Documentation »
Welding regulations »
Main materials »
Steel, cast iron »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.2 Calculations »
8.2.1 Strength calculations »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.9 Equipment for centrifugal and gravity separation of liquid and non-uniform systems »
ISO classifier »
71 CHEMICAL INDUSTRY »
71.120 Equipment for chemical industry »
71.120.01 Equipment for chemical industry as a whole »
National standards »
71 CHEMICAL INDUSTRY »
71.120 Equipment for chemical industry »
71.120.01 Equipment for chemical industry as a whole »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G02 Norms of calculation and design »
As a Replacement Of:
GOST 14249-80: Vessels and apparatus. Norms and methods of strength calculation
The Document References:
GOST 14249-80: Vessels and apparatus. Norms and methods of strength calculation
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 24755-89: Vessels and apparatus. Norms and methods of strength calculation for openings reinforcement
GOST 24756-81: Vessels and apparatus. Norms and methods of strength calculation. Rated strength calculation of column-type apparatus from wind loads and seismic impact
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 25859-83: Steel vessels and apparatuses. Norms and methods of fatigue strength calculation under low-cyclic loads
GOST 25867-83: Vessels and apparatuses. Jacketed vessels. Norms and methods of strength calculation
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST R 51273-99: Vessels and apparatus. Norms and methods of strength calculation. Rated strength calculation of column type apparatus from wind loads and seismic influence
The Document is Referenced By:
ATK 24.200.04-90: Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
ATK 24.201.10-90: Inspection Windows for Steel Vessels and Apparatus. Types, Design, and Dimensions. Technical Requirements
ATK 24.201.18-91: Flanges, Covers, and Gaskets for Compact Chemical Apparatus. Design and Dimensions. Technical Specifications
ATK 24.218.04-90: Liquid mesh filters for pipelines. Design, dimensions and dimensions
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants
GOST 12.2.054-81: Acetylene installations
GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.2.233-2012: Occupational safety standards system. Refrigerating equipment of refrigerating capacity over 3,0 kW. Safety requirements
GOST 12619-78: Conical heads with knuckle, apex angles 60 and 90 degrees. Basic dimensions
GOST 12620-78: Conical heads without knuckle, apex angles 60, 90 and 120 degrees. Basic dimensions
GOST 12621-78: Conical heads without knuckle, apex angle 140 degrees. Basic dimensions
GOST 12623-78: Flat neads without knuckle. General dimensions
GOST 17032-2022: Horizontal steel tanks for petroleum products. Specifications
GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods
GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications
GOST 22161-76: Marine machines, mechanisms, steam boilers, vessels, apparatus. Norms and rules of hydraulic and air testing
GOST 24755-89: Vessels and apparatus. Norms and methods of strength calculation for openings reinforcement
GOST 25215-82: High-pressure vessels and apparatus. Shells and heads. Norms and methods of strength calculation
GOST 25859-83: Steel vessels and apparatuses. Norms and methods of fatigue strength calculation under low-cyclic loads
GOST 26303-84: High-pressure vessels and apparatus. Threaded studs. Methods of strength calculation
GOST 30549-98: Dump cars for 1520 mm railway gauge. Requirements safety
GOST 30780-2002: Steel vessels and apparatus. Bellows-type expansion joints. Strength calculation methods
GOST 30872-2002: Air cooling machines. General specifications
GOST 31314.3-2006: Series 1 freight containers. Technical requirements and test methods. Part 3. Tank containers for liquids, gases and pressurized dry bulk
GOST 31512-2012: Medical monoplaced fixed barochambers. General technical requirements
GOST 31824-2012: Fibrous mist eliminators. Types and main parameters. Safety requirements. Methods of testing
GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing
GOST 31831-2012: Centrifugal dust collectors. Safety requirement and methods of testing
GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods
GOST 31837-2012: Abcorptive gas purifiers. Safety requirements and test methods
GOST 31838-2012: Columns. Technical requirements
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments
GOST 33211-2014: Freight cars. Requirements for strength and dynamic properties
GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications
GOST 33549-2015: Containers-tanks with a vessel of composite materials. Requirements and test methods
GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications
GOST 33965-2016: Stationary water-tube boilers. Calculation for the component basic dimensions selection. Strength factors and hole reinforcement
GOST 8.563.1-97: Measurement of liquids and gases flow rate and quantity by differential pressure method orifice plates, nozzles isa 1932 and ventury tubes inserted in circular cross-section filled conduits.
GOST R 12.2.142-99: Occupational safety standards system. Refrigerating equipment of refrigerating capacity over 3,0 kW. Safety requirements
GOST R 50821-95: Fibrous mist eliminators. Their types and main parameters. Safety requirements. Methods of testing
GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51274-99: Vessels and Plant Equipment Column-Type Vessels Strength Calculation Standards and Methods
GOST R 51316-99: Medical monoplaced fixed barochambers. General technical requirements
GOST R 51364-99: Air cooling apparatus. General specifications
GOST R 51562-2000: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
GOST R 51707-2001: Electrostatic precipitators. Safety requirement and methods of testing
GOST R 51708-2001: Centrifugal dust collectors. Safety requirement and methods of testing
GOST R 51753-2001: High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications
GOST R 51878-2002: Adsorptive gas cleaners. Safety requirements and test methods
GOST R 52076-2003: Series 1 freight containers. Technical requirements and test methods. Part 3. Tank containers for liquids, gases and pressurized dry bulk
GOST R 52400-2005: Air reservoirs for railway brakes. General specifications
GOST R 52445-2005: Absorptive gas purifiers. Safety requirements and test methods
GOST R 53291-2009: Portable and movable devices of fire extinguishing with high-velosity submission of fire quenching matter. General technical requirements. Test methods
GOST R 53323-2009: Flame arrestors and spark arrestors. General technical requirements. Test methods
GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements
GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 55085-2012: Cylinders steel welded on pressure 1,6 MPа for liquefied hydrocarbon gas, used as motor fuel on car transport facility. Specifications
GOST R 55260.1.5-2012: Hydro power plants. Part 1-5. Hydrotechnical constructions of hydroelectric power station. Requirements for projection in seismic areas
GOST R 55892-2013: Objects of low-tonnage liquefied natural gas production and consumption. General technical requirements
GOST R 55989-2014: Trunk gas pipelines. Design standard for pressure over 10 MPa. Principal requirements
GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes
I3-94: Instructions for diagnosing the technical condition of tanks of liquefied gas installations
ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries
ITNJe-93: Instruction on technical supervision and operation of pressure vessels not covered by the Rules of Gosgortechnadzor
NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods
NPB 254-99: Flame arrestors and spark arrestors. General technical requirements. Test methods.
NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods
NPB 54-2001: Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods
NPB 54-96: Automatic Gaseous Agent Fire Extinguishing Systems. Modular Components and Cylinders. General Technical Requirements. Test Methods
NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods
OMU 42-21-27-88: Hyperbaric oxygenation devices. Operation and repair rules
OST 108.031.09-85: Stationary boilers and steam and hot-water pipelines. Strength calculation norms. Methods of determination of wall thickness.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-01-102-70: Vessels and devices. Tenacity standards and testing. Correction coefficients set for standard allowable stress.
OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements
OST 26-02-910-80: Condensate expanders. Specifications
OST 26-1046-87: High-pressure vessels and devices. Norms and methods of endurance calculation.
OST 26-11-04-84: Steel vessels and devices. Allowable stress.
OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements
OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
RD 03-29-93: Instructional Guidelines For Engineering Certification of Steam and Hot-Water Boilers, Pressure Vessels, Steam and Hot-Water Pipelines
RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure
RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases
RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
RD 153-34.1-39.502-98: Guidelines for Operation and Procedure and Schedule for Checking safety Devices for Vessels, Apparatus, and Piping Systems of Thermal Power Stations
RD 2082-18-2005: Technical diagnosis and design life prolongation program for cryogenic tank.
RD 24.200.17-90: Vessels and apparatuses made of titanium. Norms and methods of strength calculation.
RD 24.200.21-91: Vessels and Apparatus. Strength Standards and Methods for Strength Analysis of Air-Floated Head Elements of Shell-and-Tube Heat Exchangers
RD 24.207.04-90: Pipe fittings. Enclosures and covers. Guidelines for the calculation of permissible stresses and methods for assessing the strength
RD 26.260.004-91: Procedural Guidelines. Prediction of Remaining Service Life of Equipment According to the Change in its Operational Parameters During Operation
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 26.260.09-92: Vessels and apparatuses. Standards and methods for calculating the strength of cylindrical shells and convex bottoms in the places of connection of fittings with external static loads
RD 26.260.12-99: Service life extension of liquid carbon dioxide vessels. Instructional guidelines.
RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities
RD 26-01-168-88: Fixed metal seals for vessels and apparatus at pressures above 10 to 100 MPa (over 100 to 1000 kgfs/cm2). The method of calculation of strength and density
RD 26-01-55-84: Evaporating devices. Norms of calculation for durability.
RD 26-01-87-86: Fin Heat Exchangers. Methods of Strength Analysis and Leak Testing
RD 26-02-62-98: Stressing calculation of vessels and apparatus components, operating in aggressive corrosive hydrogen sulphide-containing medium.
RD 26-14-88: Vessels and devices. Tenacity standards and testing. Heat exchange elements.
RD 26-15-88: Vessels and apparatus. Norms and methods of strength and tightness calculation for flanged joints.
RD 2-97: Regulations on the system for the technical diagnosis of autoclaves in the production of building materials
RD 302-07-210-93: Metals used in the valve industry
RD 51-0220570-2-93: Safety valves. Selection, installation and design
RD ROSEK 04-010-98: Guidelines for the technical diagnosis and extension of the service life of pressure chambers
RD RTM 26-01-44-78: Piping Components for Use at Pressure Above 10 to 100 MPa. Strength Standards and Calculation Methods
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
RM 4-266-93: Embedded devices in pipelines and equipment for installation of instruments and automation equipment. Guide to the choice of means of strengthening holes
RTM 26-02-65-83: Stressing calculation of high-pressure aerial cooler apparatus components.
SA 03-004-07: Calculation of the strength of vessels and apparatus
SA-03-003-07: Stressing and vibration calculation of steel industrial pipelines.
SO 153-34.17.439-2003: Instruction for prolongation of exploitation term of pressure vessels
SP 43.13330.2012: Structures for industrial installations
ST RK 1357-2005: Pressure vessels. Basic design requirements
ST RK 1420-2005: Road vehicles for transportation and fuelling of petroleum products. Types, parameters and general technical requirements
ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure
ST RK GOST R 52076-2006: Series 1 freight containers. Specification and testing methods Part 1. Tank containers for liquids, gases and bulk freights under pressure
ST TsKBA 003-2003: Pipe fittings. Enclosures and covers. Rationing static strength
ST TsKBA 005.2-2004: Pipe fittings. Metals used in the valve industry. Part 2. Reference data on the properties of materials
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 024-2006: Pipe fittings. Determination of residual life and reliability indicators
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
STP 09-04-02(001-STP/A): Calculations for the strength and vibration of steel process pipelines
STP 10-04-02: Calculation of the strength of vessels and apparatus. Volume 1. Calculation of vertical and horizontal vessels
TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications
VNTP 81-85: Norms of technological design for petroleum-refining and organic synthesis products manufacture enterprises
VSP 34-01-03 MO RF: Guidelines for the calculation and design of metal tanks and pipelines in the fuel depots of the Ministry of Defense of the Russian Federation
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.