GOST 14955-77
ГОСТ 14955-77
|
|
Quality round steel with a special surface finish
Сталь качественная круглая со специальной отделкой поверхности
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)
The standard applies to round quality steel with a diameter of from 0.20 to 50 mm with a special surface finish.
Стандарт распространяется на круглую качественную сталь диаметром от 0,20 до 50 мм со специальной отделкой поверхности.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
9/2/1977
SKU: RUSS18952
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.20 Stainless steels »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.20 Stainless steels »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V32 Rolled and shaped steel »
As a Replacement Of:
GOST 14955-69: Round steel with special surface finish - silver
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10396-84: Crepe cable paper
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 14253-83: Unwoven stitched wiping rags. Specifications
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14955-69: Round steel with special surface finish - silver
GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 16295-82: Packing anticorrosive paper. Specifications
GOST 16295-93: Anticorrosion paper
GOST 166-89: Vernier callipers. Specifications
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 18477-79: Universal containers
GOST 19265-73: Bars and strips out of high-speed steel. Specifications
GOST 20259-80: Universal containers
GOST 20799-75: Industrial oils. Specifications
GOST 20799-88: Industrial oils Specifications
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 2216-84: Adjustable smooth snap gauges
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3560-73: Sealing tepe
GOST 4543-71: Structural alloyed steel
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 5950-73: Bars and strips from a toolhouse steel alloy
GOST 6009-74: Hot-rolled steel strip. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7566-81: Rolled stock and products for further treatment
GOST 7566-94: Metal products
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9569-79: Paraffin paper
The Document is Referenced By:
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10831-80: Paint rolls specification
GOST 10831-87: Paint rolls specification
GOST 11177-84: Hand tapered reamers with cylindrical shank, taper 1:50. Basic dimensions
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 1435-74: Non-alloyed tool steel. Specification
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 1452-2003: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 14803-85: Rivets (high precision). General specifications
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 14963-78: Doped steel spring wire
GOST 17024-82: End mills
GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel
GOST 19265-73: Bars and strips out of high-speed steel. Specifications
GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel
GOST 20072-74: Heat-resistant steel
GOST 21022-75: Chromic steel for precise bearings. Specifications
GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications
GOST 28393-89: PM bars and strips of high-speed steel. General specifications
GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications
GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties
GOST 33186-2014: Clamp of spring rod for mounting rails. Specifications
GOST 3449-84: Taps. Specifications
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4543-71: Structural alloyed steel
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 5950-73: Bars and strips from a toolhouse steel alloy
GOST 6476-80: Files for sharpening wood saws. Specifications
GOST 801-2022: Rolled bearing steel. Technical conditions
GOST 801-78: Bearing steel. Specifications
GOST 8831-79: Longitudinal turning machines. Automatics. Standards of accuracy
GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods
GOST R 50703-94: Heading machines having cutter heads mounted on booms. Test methods
GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications
GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties
GOST R 54908-2012: Heat-resistant steel metal products. Specifications
GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications
GOST R 56299-2014: Rolled products from bearing steel. Specifications
GOST R 58517-2019: Paint rollers. Technical conditions
GOST R 59136-2020: Main pipeline transportation of oil and oil products. Welding materials. General specifications
MI 1069-85: State system for ensuring uniformity of measurements. Methodical instructions. Machine-oriented data recording system for metals (alloys)
OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.
PNST 13-2012: Nanostructured screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
PNST 14-2012: Machine nanostructured springs. Specifications
RD 31.55.08.01-89: Iron casting. Materials charge and auxiliary. Consumption rates
RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI
RST RSFSR 580-77: Bows. General technical conditions
RST RSFSR 92-83: Musical wind instruments. General technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.