imgalt

GOST 16349-85

ГОСТ 16349-85

Cyclic mixers for building materials

Смесители цикличные для строительных материалов

Status: Effective - Supersedes. IUS 3-1986; The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to cyclic mixers for building materials performed by U2 according to GOST 15150 for operation at a temperature not lower than 5 ° С, intended for the preparation of mortar and concrete mixes on mineral binders, dense and porous aggregates. The standard does not apply to concrete mixers, laboratory mixers, mortar mixers such as PH, household mixers and mixers designed for the preparation of cellular, acid-resistant, alkali-acid, heat-resistant, very heavy and other types of special concrete mixes. The standard establishes requirements for mixers manufactured for the needs of the national economy and export.

Стандарт распространяется на цикличные смесители для строительных материалов в исполнении У2 по ГОСТ 15150 для работы при температуре не ниже 5 °С, предназначенные для приготовления растворных и бетонных смесей на минеральных вяжущих, плотных и пористых заполнителях. Стандарт не распространяется на автобетоносмесители, лабораторные смесители, растворосмесителе типа РН, бытовые смесители и смесители, предназначенные для приготовления ячеистых, кислостойких, щелочекислых, жаростойких, особо тяжелых и других видов специальных бетонных смесей. Стандарт устанавливает требования к смесителям, изготовляемым для нужд народного хозяйства и экспорта.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 12/13/1985

SKU: RUSS18954

Price: $201.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 91 Building materials and construction »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.7 Machines and equipment for construction industry »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.220 Construction equipment »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.220 Construction equipment »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G45 Machines and equipment for industry of building materials, construction, road and earthworks and public utilities »

National Standards for OKSTU » CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS » Equipment for the preparation of building mixtures »


As a Replacement Of:

GOST 16349-70: Cyclic concrete mixers

GOST 6508-81: Mortar batch mixers, cyclical. Specification

The Document References:

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10181.0-81: Concrete mixtures. General requirement to test methods

GOST 10181.1-81: Concrete mixture. Test method of determination of workability

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10354-82: Polyethylene film Specifications

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.011-75: Construction and road machines

GOST 12.4.026-76: Signal colors and safety signs

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 14192-96: Cargo marking

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.

GOST 15846-79: Products for transportation to the areas of the far north and remote regions

GOST 16349-70: Cyclic concrete mixers

GOST 17.2.2.03-87: Nature protection. Atmosphere. Rates and methods of measuring carbon monoxide and hydrocarbons content in exhaust gases of petrol-engine vehicles. Safety requirements

GOST 17168-82: Octave and one-third-of-octave electronic filters

GOST 17187-81: Noise meters

GOST 18105-86: Concretes. Rules for the strength control

GOST 18374-79: Enamels XB-110 and XB-113. Specifications

GOST 19024-79: Enamels AC-182. Specifications

GOST 2.601-95: Operational documents

GOST 20519-75: System of standardization of products for export. Exhibits for fairs and exhibitions. General requirements

GOST 22783-77: Concretes. Method of accelerated determination of compressive strength

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 23941-79: Noise of machines. Methods for determination of noise characteristics. General requirements

GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 29329-92: Balance for static weightings

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5802-86: Mortars. Test methods.

GOST 6465-76: Enamels PF-115. Specifications

GOST 6508-81: Mortar batch mixers, cyclical. Specification

GOST 7473-94: Ready-mixed concrete. Specifications

GOST 7502-89: Measuring metal tapes. Specifications

GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST 9.402-80: Metal surface preparation for painting

GOST 9754-76: Enamels MЛ-12 type. Specifications

GOST ED1 16349-88: Concrete mixers cyclical. Technical conditions

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

The Document is Referenced By:

GOST 27338-93: Concrete mixing plant

GOST 34885-2022: System of dry construction waterproofing mixtures based on cement binder for sealing static joints (cracks) in building structures. Technical conditions

GOST 7473-85: Ready-mixed concrete. Specification

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!