Construction Of Main And Field Pipelines Welding
Строительство магистральных и промысловых трубопроводов. Сварка
Status: Partially effective. The document is not valid only in the gas industry.
Departmental building codes apply to the welding of annular joints of seamless, electrically welded longitudinal and spiral pipes of hot rolled, including controlled rolling, normalized and thermally strengthened low carbon and low alloyed steels with a standard value of temporary tensile strength up to 588 MPa (60 kgf
Ведомственные строительные нормы распространяются на сварку кольцевых стыков бесшовных, электросварных прямошовных и спиральношовных труб из горячекатаных, в том числе с контролируемой прокаткой, нормализованных и термически упрочненных низкоуглеродистых и низколегированных сталей с нормативным значением временного сопротивления на разрыв до 588 МПа (60 кгс/мм2) и термоупрочненных до 637 МПа (65 кгс/мм2) диаметром от 57 до 1420 мм с толщиной стенок 5 - 32 мм, предусмотренных проектом. ВСН регламентируют: ручную электродуговую сварку штучными электродами; автоматическую сварку под флюсом; сварку порошковой проволокой с принудительным формированием шва; автоматическую и полуавтоматическую сварку в защитных газах; ручную аргонодуговую сварку корневого шва; стыковую сварку оплавлением; сварку вращающейся магнитоуправляемой дугой; индукционную пайку; разделительную и поверхностную резку трубопроводов. ВСН не распространяются на сварку трубопроводов специального назначения (аммиакопроводов, этиленопроводов, этанопроводов и т.д.), а также трубопроводов, предназначенных для транспорта коррозионно-активных продуктов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Minneftegazstroy,
3/14/1989
SKU: RUSS18994
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of oil and gas industry facilities »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Installation and special construction works »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Soldering »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Main materials »
Polymers »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.2 Calculations »
8.2.1 Strength calculations »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.4 For pipeline transport of oil and gas »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.4 Environmental safety requirements in design, installation and operation of submarine cables and pipelines »
ISO classifier »
71 CHEMICAL INDUSTRY »
71.020 Manufacture in chemical industry »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.020 Production and processing of oil and natural gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
2003.200.13 Pipelines and their components »
As a Replacement Of:
VSN 167-84: Instructions on welding technology when performing special installation work on the construction of pipelines
VSN 184-85: Technology of automatic welding of non-rotary joints of pipelines with a diameter of 530 mm or more cored wire with forced formation
VSN 186-85: Instructions on pipe cutting technology in route conditions
VSN 202-86: Welding at the stage of construction of technological holes in main pipelines
VSN 2-124-80: Instructions for welding technology pipelines
VSN 2-139-82: Instructions on the technology of butt welding of small-diameter pipes with large wall thicknesses
VSN 2-72-82: Instructions on the technology of butt welding of electric contact reflow of main pipelines of steel with a tensile strength of up to 60 kgf
VSN 505-87: Technical requirements (installation) to the engineering of oil refining and petrochemical industry objects with the use of units (automation system)
The Document References:
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 12.2.007.8-75: Devices for electric welding and plasma treatment
GOST 12.3.004-75: Occupational safety standards system. Heat treatment of metals. General safety requirements
GOST 14792-80: Parts and work pieces made by oxygen and plasma arc cutting. Cut face accuracy and quality
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 17379-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Elliptical pipe seals. Design and dimensions
GOST 2246-70: Welding steel wire. Specifications
GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8050-85: Carbon dioxide,
GOST 9087-81: Welding melted fluxes
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
VSN 005-88: Construction of field steel pipelines Technology and arrangement
VSN 012-88: Main pipeline and flowline construction. Quality control and commissioning of works
VSN 505-87: Technical requirements (installation) to the engineering of oil refining and petrochemical industry objects with the use of units (automation system)
The Document is Referenced By:
Manual for SNiP 3.05.02-88: Manual on technology and organization of the construction of pipelines for gas supply systems in rural areas of the Non-chernozem zone of the RSFSR
RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.
RD 153-112-014-97: Guidelines on Accident Response and Repair at Petroleum Product Trunk Pipelines
RD 153-39.1-561-08: Instructions for the construction, operation and repair of pipelines from metal-plastic pipes
RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.
RD 153-39.4-044-99: Rules of total overhaul of main oil product pipelines laid in the cities, settlements and entering the territory of tank farms and pumping stations
RD 153-39.4-056-00: Main crude pipeline. Operations rules.
RD 153-39.4-058-00: Standard plan for the organization and technology of work on the elimination of accidental spills of petroleum products in case of accidents and damage to crossings of oil pipelines through major water barriers
RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.
RD 153-39.4-114-01: Rules for accident response and trouble shooting on trunk oil pipelines.
RD 39-00147105-015-98: Rules of total overhaul of main oil pipelines
RD 39-110-91: Main pipeline accident and damage elimination instructions
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 558-97: Guidance Document for Pipe Welding Technology in Repair and Renovation of Gas Pipelines
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SP 105-34-96: Code of regulations on construction of trunk gas pipelines. Welding works and quality control of welding joints
SP 108-34-97: SPSMG. The construction of underwater passages. RAO "Gazprom", 01/08/98
SP 109-34-97: SPSMG. The construction of crossings under roads and railways
SP 34-112-97: Construction of Trunk Pipelines and Flowlines. Integrated Technology and Organization
SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines
SP 422.1325800.2018: Pipelines trunk and field for oil and gas. Construction of underwater crossings and work control
SP 86.13330.2014: Main (Trunk) pipelines
STN 51-4-92: Construction of Underwater Crossings of Pipelines by Trenchless Method
TR 101-07: Technical recommendations for the design and construction of non-pressure underground pipelines for domestic and rainwater sewage from polyethylene pipes with a two-layer profiled wall "Korsis"
VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines
VRD 39-1.10-049-2001: Правила распространяются на эксплуатацию, реконструкцию и ремонт магистральных, межпромысловых и промысловых конденсатопродуктопроводов и отражают специфику транспорта стабильеого, нестабильного, деэтанизированного конденсата, широкой фракции легких углев
VRD 39-1.11-014-2000: Procedural Guidelines for Inspection and Identification of Steel Pipes for Gas and Petroleum Pipelines
VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)
VSN 012-88: Main pipeline and flowline construction. Quality control and commissioning of works
VSN 013-88/Minneftegazstroj: Construction of main and field pipelines in permafrost
VSN 39-1.8-008-2002: Design of electrical insulating inserts for main and field pipelines
VSN 51-1-97: Work Execution Requirements for Overhaul of Trunk Pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
