GOST 10062-75
ГОСТ 10062-75
|
|
Natural combustible gases. Method for determination of specific heat of combustion
Газы природные горючие. Метод определения удельной теплоты сгорания
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)
The standard applies to natural and enriched sand and gravel mixtures used: natural - for paving, the top layer of foundations for coatings, for draining layers and for other purposes in road construction in accordance with the requirements of the rules and regulations for the construction of roads; enriched (obtained from natural sand-gravel mixtures by enrichment) - in accordance with the requirements of building codes and regulations for the relevant types of construction work. The standard does not apply to natural sand and gravel mixtures used as a semi-finished product for subsequent processing by consumers.
Стандарт распространяется на природные и попутные горючие газы и устанавливает метод определения удельной теплоты сгорания. Сущность метода заключается в сжигании в калориметрической бомбе (при постоянном объеме) в среде сжатого кислорода определенного объема газа, обуславливаемого вместимостью данной бомбы, атмосферным давлением, температурой и остаточным давлением газа в бомбе, и определении количества тепла, выделившегося при сгорании газа, а также при образовании и растворении в воде азотной и серной кислот при испытании. Допускается определять удельную теплоту сгорания смеси природных и попутных горючих газов и искусственным (коксовый, газы крекинга и другие) при массовой доли природных горючих газов в смеси не менее 70 % и при низшей удельной теплоте сгорания смеси не менее 27210 кДж/м3 (6500 ккал/м3).
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
7/4/1975
SKU: RUSS19001
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.2 Oil, oil products and gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.060 Natural Gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.060 Natural Gas »
National Standards for KGS (State Standards Classification) »
Latest edition »
B Oil products »
B1 Liquid and gaseous fuel »
B19 Test methods. Packaging. Marking »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Combustible natural and artificial gas, gas condensate, helium, oil refining and pyrolysis gas, products of gas processing plants »
The Document is Replaced With:
GOST 35076-2024: Natural gas. Methods of determination of volumetric heat of combustion
As a Replacement Of:
GOST 10062-62: Combustible natural and associated gases. VTI method for determination of heat ratio by burning in a calorimetric bomb
The Document References:
GOST 12026-76: Filter paper for laboratory application
GOST 1277-75: Reagents. Silver nitrate. Specifications
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24104-88: General purpose and reference laboratory balances
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 28498-90: Liquid-in-glass thermometers
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 4108-72: Reagents. Barium chloride, 2-aqueous. Specifications
GOST 4233-77: Reagents. Sodium chloride. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 5583-78: Industrial and medical gaseous oxygen
GOST 6709-72: Distilled water. Specifications
The Document is Referenced By:
Decision 112: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including rules of sampling, necessary for the application and implementation of the requirements of technical regulation of the Eurasian Economic Union "On safety of combustible natural gas prepared for transportation and (or) use" (TR EAEC 046/2018) and conformity assessment of technical regulation
GOST 12.1.044-84: Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indicators and methods for their determination
GOST 27577-2022: Compressed natural fuel gas for internal combustion engines. Specifications
GOST 34867-2022: Natural gas prepared for transportation through the main gas pipelines. Technical conditions
GOST 34894-2022: Liquefied natural gas. Technical conditions
GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications
GOST 5542-87: Natural fuel gases for industrial and domestic use
GOST R 59417-2021: Biological safety. Determination of the biogas potential of municipal solid waste landfills with the pumping of biogas from vertical wells and utilization in a flare unit. General specifications
GOST R 8.577-2000: State system for assuring the uniformity of measurements. Volumetric heat (energy) of combustion of natural gas. General requirements to methods for determination
GOST R 8.668-2009: State system for ensuring the uniformity of measurements. Volumetric heat (energy) of combustion of natural gas. General requirements for methods for measurement
GOST R 8.816-2013: State system for ensuring the uniformity of measurements. Natural gas. Volumetric heat (energy) of combustion. Method for measurement using the bomb calorimeter
MI 2353-95: State system for ensuring uniformity of measurements. Calorimeter gas automatic model 66. Calibration method
R 50.2.043-2005: State system for ensuring uniformity of measurements. Volumetric heat (energy) of natural gas combustion. Expert assessment of the reliability of measurement results obtained using calorimeters and gas chromatographs
RD 153-34.0-04.202-98: Procedural Guidelines. Certification of Departments of Energy Facilities Performing Quantitative Chemical Analysis. Organization and Procedure
RD 153-34.1-11.320-00: Natural Gas. Methods for Measurement of Quality Ratings of Gaseous Fuel Supplied to Thermal Power Stations
RD 153-34.1-27.301-2001: Test methods for ash collecting plants of thermal power plants and boilers
RD 34.11.111-89: Methodology instructions. State analysis of metrological industrial support at energy providers and sectoral research institutes
RD 34.11.321-96: Standards for Error in Measurement of Process Parameters of Thermal Power Stations and Substations
SO 34.09.114-2001: Guidelines for quality control of solid, liquid and gaseous fuels for the calculation of specific fuel consumption at thermal power plants
SO 34.26.721: Guidelines for testing steam boilers for separate combustion of natural gas and fuel oil
SO 34.26.722: Guidelines for testing steam boiler superheaters
SO 34.44.223: Recommendations for fuel claim handling
VRD 39-1.10-064-2002: Equipment for liquefied natural gas (LNG). General technological requirements when operating storage, transportation and gasification
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.