Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Инструкция по проектированию технологических стальных трубопроводов Ру до 10 МПа
Status: Reference materials, MP, TPR
Establishes the requirements for the design of technological steel pipelines with a diameter of up to 1,400 mm, intended for the transportation of liquid and gaseous substances with different physicochemical properties (raw materials, semi-finished products, reagents, intermediate and final products obtained or used in the process, etc.), pressure up to 10 MPa and temperature from minus 70 to plus 450 degrees Celsius.
Устанавливает требования проектирования технологических стальных трубопроводов с диаметром до 1400 мм, предназначенных для транспортирования жидких и газообразных веществ с различными физико-химическими свойствами (сырье, полуфабрикаты, реагенты, промежуточные и конечные продукты, полученные или использованные в технологическом процессе, и др.), с давлением до 10 МПа и температурой от минус 70 до плюс 450 градусов Цельсия.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
8/4/1980
SKU: RUSS19006
The Product is Contained in the Following Classifiers:
Construction (Max) »
Reference documents »
Reference guidelines to SNiP »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
The Document References:
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 1412-85: Flakish graphite cast iron
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements
SNiP 2.01.01-82: Construction climatology and geophysics
The Document is Referenced By:
IM 14-51-94, v.2: Guidelines and explanations on topical issues of development of automation systems. Release 2. General questions of application of standard drawings
IN 4-7-92: Index of regulatory and technical documents (as of 01.03.92)
ITP 31-87: Instructions for the technological design of enterprises for the production of perfumery products
Manual to SN 527-80: Manual to SN 527-80. On the strength design of the technological steel pipelines at Py up to 10 Mpa
NTP 24-94: Norms of technological design of hydrogen production by the method of water electrolysis
NTPD-90: Norms of technological design of diesel power plants
ONTP 1-86: All-union regulations of technological engineering of liquefied petroleum gas extraction plants
ONTP 51-1-85: National Engineering Design Standards. Trunk Pipelines. Part I: Gas Pipelines
OPV 88: General Explosion Safety Requirements for Explosion-Hazardous Chemical, Petrochemical, and Petroleum Refining Processes
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 95 511-85: Rules of formatting the detailed drawings of technological pipelines (KTD)
PB 03-110-96: Safety regulations on pressurized storage of liquefied petroleum gas and highly inflammable liquids
PB 08-83-95: Requirements for the Organization and Safe Operation of Underground Storage Facilities for Natural Gas in Salt Deposits
PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries
PB 09-592-03: Rules for arrangement and safe operation of refrigerating systems
PB 11-219-98: Safety Requirements in Coke Byproducts Operations
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
PPBO-157-90: Fire Safety Regulations in the Timber Industry
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants
RD 153-39.4-113-01: Standards for technological design of main pipelines
RD 210.006-90: Rules for the technological design of nuclear power plants (with VVER reactors)
RD 26-4-87: Rules. Equipment for balloonless supply of enterprises with carbon dioxide. Selection and application
RD 31.3.05-97: Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)
RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95
RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97
RD 34-10.030-89: Rules for quality control of welded joints of pipelines of nuclear power plants
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 39-135-94: Norms for technological design of gas-processing plants
RD 95 10541-98: Equipment for working with radioactive media. Classification
RM 4-23-93: Automation systems. Pipeline diagrams for measuring pressure, flow and level. Building rules
RM 4-266-93: Embedded devices in pipelines and equipment for installation of instruments and automation equipment. Guide to the choice of means of strengthening holes
RM 4-6-92: Process automation systems. Design of electrical and pipe wiring. Part 3. Guidelines for the implementation of the documentation. Allowance for RTM 36.22.7-92
RTM 36.22.13-90: Automation systems. Assembly and technological requirements for design
RTM 38.001-94: Guidelines for the calculation of strength and vibration of technologically steel pipe.
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
SN 542-81: Instructions for the design of thermal insulation of equipment and pipelines of industrial enterprises
SNiP 2.05.13-90: Oil-product pipelines laid on the territories of cities and other settlements
SNiP 3.05.05-84: Processing equipment and process pipelines
SNiP 3.05.07-85: Automated systems
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
SZK 4-4-90: Instruments for measuring and regulating the level. Installation of embedded structures on tanks. Knots and details. Part II
VNTP 03-86: Industry-Specific Engineering Design Standards for Cold-Storage Distribution Warehouses
VNTP 03-91: Departmental standards of technological design of sugar beet factories. Volume 2, Part 1. Appendices
VNTP 04-94k: Standards for technological design of enterprises for processing potatoes for starch
VNTP 12-92 KD: Interim Engineering Design Standards for Facilities for Production of Canned Foods for Child Nutrition
VNTP 12-94K: Engineering Design Standards Facilities of the Canned Fruits and Vegetables Industry
VNTP 2-86: Engineering design standards for crude oil transmission pipelines
VNTP 36-92: Standards of technological design of enterprises of the food concentrate industry
VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
VNTP 41-85: Standards for the technological design of hydroelectric and pumped storage power plants
VNTP 51-1-88: Industry norms of technological design of Installations for Production and Storage of Liquefied Natural Gas, Isothermal Storages and Gas Filling Stations
VNTP 52-91: Departmental norms of technological design of warehouses of vegetable oils and fats of oil and fat enterprises
VNTP 5-95: Norms of technological design of enterprises for provisioning with petroleum products (petroleum storage depots)
VNTP 81-85: Norms of technological design for petroleum-refining and organic synthesis products manufacture enterprises
VNTP-88: Departmental norms of technological design of washing and steaming stations
VPNRM 476-89: Industry-Specific Specified Quantity Allowances for Materials Used in Installation Practices and Military Construction. Fabrication of Assemblies and Parts for Process Piping
VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)
VSN 07/02/34 Russian Defense Ministry: Design of fuel depots of the Ministry of Defense of the Russian Federation
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 12-87/MMF: Crude oil and oil product handling berth facilities. Fire protection. Design practice
VSN 362-87: Disinfections and Etching of Pipelines
VSN 458-85: Compendium of Industry-Specific Specified Quantity Allowances for Materials Used in Installation Practices and Military Construction. Volume 1: Installation of Process Piping
VSN 459-85: The collection of departmental production norms for the consumption of materials for installation and special construction work. Issue 1. Installation of technological equipment of the enterprises of the chemical, petrochemical and petrochemical industrie
VSN 462-85: Use of Cast Polyurethane Foam for Thermal Insulation of Piping and Equipment
VSN 500-87: Installation Requirements for Modular Design of Petroleum Refineries and Petrochemical Facilities -Thermal Insulation
VSN 51-3-85: Design of field steel pipelines
VSN 64-064-88: Instructions for the construction design of the medical and microbiological industry
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
