imgalt

SNiP 2.01.14-83

СНиП 2.01.14-83

Determination of design hydrologic characteristics

Определение расчетных гидрологических характеристик

Status: Not effective - Superseded

Standards apply to the definition of the calculated hydrological characteristics in the design of river hydraulic structures, railways and roads, buildings of land-improvement systems, water supply systems, planning and building settlements, general plans of industrial and agricultural enterprises, as well as in the development of measures to combat flooding. These standards do not apply to the determination of the calculated hydrological characteristics during engineering surveys and the design of facilities to be built on the estuarine sections of rivers located in the zone of influence of tides and ebbs, as well as on mudflow rivers.

Нормы распространяются на определение расчетных гидрологических характеристик при проектировании речных гидротехнических сооружений, железных и автомобильных дорог, сооружений мелиоративных систем, систем водоснабжения, планировки и застройки населенных пунктов, генеральных планов промышленных и сельскохозяйственных предприятий, а также при разработке мероприятий по борьбе с наводнениями. Настоящие нормы не распространяются на определение расчетных гидрологических характеристик при инженерных изысканиях и проектировании объектов, подлежащих строительству на устьевых участках рек, находящихся в зоне влияния морских приливов и отливов, а также на селеопасных реках.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction), 7/15/1983

SKU: RUSS19017

Price: $741.00

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 3. Normative documents on urban planning, buildings and constructions » к.33 Hydrotechnical and meliorative constructions »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 4 Ensuring environmental safety during subsoil use » 4.2 Use and protection of subsoil » 4.2.1 General requirements for use of subsoil »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.120 Protection of buildings, inside and out » 91.120.01 Protection of buildings inside and outside as a whole »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.200 Construction technology » 91.200.20 Engineering surveys for construction »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.020 Earthworks. Excavation. Foundation construction. Underground work » 93.020.60 Protection of territories from ground and surface waters »


The Document is Replaced With:

SP 33-101-2003: Determination of design hydrological performance

As a Replacement Of:

SN 435-72: Guidelines for Determining Calculated Hydrological Characteristics

The Document is Referenced By:

GOST R 70567-2022: Land reclamation systems and structures. Pumping stations on polder systems. Design standards

Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"

Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)

Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)

Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"

Manual for SNiP 2.05.03-84: Guide to SNiP 2.05.03-84 "Bridges and pipes" for the survey and design of railway and road bridge crossings through waterways (PMP-91)

Manual for SNiP 2.05.07-85: Hydraulic Vehicle Design Guide

Manual for SNiP 2.05.07-85: A guide to determining the integrated technical and economic indicators of the cost of construction for comparing options and choosing types of industrial transport

Manual for SNiP 2.05.07-85: Guide for the design of conveyor transport. Conveyor belts

Manual for SNiP 2.05.07-85: Design Guide for Industrial Rail Stations

Manual for SNiP 2.05.07-85: Manual on the design of railways and roads of industrial enterprises in permafrost areas (to SNiP 2.05.07-85)

Manual for SNiP 2.05.07-85: Cable Car Design Toolkit

Manual for SNiP 2.05.07-85: Guide for the design of subgrade and drainage of railways and roads of industrial enterprises

MDS 11-5.99: Procedure Guidelines On The Expert Appraisal of Engineering Survey for the Feasibility Study (Projects, Draft Projects) of the Construction Units

ND p.4.2 SPPNAE-93: Basic Requirements for Development of Feasibility Studies for Nuclear Power Plant Construction - Ordinance on Procedure for Selection of Construction Site

NTP 1.30.03.01-06: Norms of technological design of irrigation systems using livestock runoff

NTP 1.30.03.02-06: Norms of technological design of irrigation systems using waste water

ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)

PNAE 4.1-87: Basic Provisions on Scope and Volume of Surveys for Selection of a Nuclear Power Plant Site (SPPNAE-87 Section 4.1)

PNAE G-05-035-94: Considerations external actions of natural and anthropogenic nature on nuclear and radiation hazardous objects

RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.

RD 31.31.50-88: Recommendations for the design and construction of coastal sailings and the formation of artificial territories by sea dredging. Minmorflot, Soyuzmorniiproekt, 1988

RD 51-2.4-007-97: Protection of Soils against Water Erosion in Locations of Linear Sections of Pipelines

RD 52.24.508-96: Guidelines. Organization and functioning of the subsystem for monitoring the state of transboundary surface land waters

RD 95.10531-96: Guidelines for the hydrological justification of feasibility studies and NPP projects

RSN 76-90: Engineering survey for construction. Technical requirements for the performance of hydro-meteorological works

RSN-88: Design and Construction of Roads and Highways in Non-Chernozem Areas of the RSFSR

SNiP 1.02.07-87: Engineering Research for Construction

SNiP 2.01.15-90: Engineering protection of territories, buildings and structures from hazardous geological phenomenon. Principal provisions of design

SNiP 2.06.01-86: Hydraulic facilities. basic provisions of design activities

SNiP 2.06.03-85: Irrigation and Drainage Systems and Structures

SNiP 2.06.15-85: Inundation & under-flooding. Area protection engineering

SNiP 32-01-95: Railroads with 1520-mm Track. Construction Norms and Regulations

SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)

SP 11-103-97: Code of practice. Engineering hydrometeorological survey for construction

SP 119.13330.2011: Railways with 1520 mm track

SP 32-104-98: Design of earthwork for railways with 1520 mm track

SP 33-101-2003: Determination of design hydrological performance

ST RK 1399-2005: Motor roads. Engineering surveys for construction, reconstruction, and capital repairs. Requirements for scope of work

STN Ts 01-95: 1520-mm Gauge Railways

Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction

VNTP 13-1-86/MChM SSSR: Standards for technological design of open-pit mining enterprises of ferrous metallurgy

VNTP 13-2-93: Norms of technological design of mining enterprises of metallurgy with underground mining method

VNTP 2-92: Temporary norms for the technological design of coal and shale pits

VSN 163-83: Design Considerations for the Deformation of River Beds and Shorelines of Water Bodies at Underwater Petroleum and Natural Gas Trunk Pipeline Crossings

VSN 206-87: Parameters of Wind Loads Applied to Slopes of River Transportation Structures

VSN 210-91: Design, construction and operation of anti-landing structures and devices

VSN 214-93: Standards for design and production of hydraulic works in transport construction

VSN 33-2.2.12-87: Irrigation and Drainage Systems and Structures. Pumping Stations. Design Standards

VSN 84-89: Motor road survey, design, and construction in permafrost areas

VSN-APK 2.30.05.001-2003: Melioration. Guidance on protection of acres violated by water-erosion. Mesh structures of soil-saving installations

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Sponge titanium. Specifications
Language: English
Price: $79.00
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Packaging. Determination of formaldehyde concentration in water and model environments
Language: English
Price: $217.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!