imgalt

GOST 10434-82

ГОСТ 10434-82

Electric contact connections. Classification. General technical requirements

Соединения контактные электрические. Классификация. Общие технические требования

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)

The standard applies to collapsible and non-separable electrical contact connections of tires, wires or cables (hereinafter - conductors) made of copper, aluminum and its alloys, steel, alumo-copper wires with electrical equipment leads, as well as contact connections of conductors with each other from 2.5 A. For contact connections of electrical devices for currents less than 2.5 A, the requirements of the standard are recommended. The requirements of the standard regarding the permissible value of electrical resistance and resistance of contact connections with through currents also apply to contact connections in the circuits of grounding and protective conductors of steel. The standard does not apply to electrical contact connections for special-purpose electrical devices.

Стандарт распространяется на разборные и неразборные электрические контактные соединения шин, проводов или кабелей (далее - проводников) из меди, алюминия и его сплавов, стали, алюмомедных проводов с выводами электротехнических устройств, а также на контактные соединения проводников между собой на токи от 2,5 А. Для контактных соединений электротехнических устройств на токи менее 2,5 А требования стандарта являются рекомендуемыми. Требования стандарта в части допустимого значения электрического сопротивления и стойкости контактных соединений при сквозных токах распространяются также на контактные соединения в цепях заземляющих и защитных проводников из стали. Стандарт не распространяется на электрические контактные соединения электротехнических устройств специального назначения.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Product Quality and Standards Management, 2/3/1982

SKU: RUSS19019

Price: $183.00

English keywords: connecting devices;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 29 Electrical Engineering »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Metal structures »

Welding regulations » Documentation »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Welding work » Soldering »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

ISO classifier » 29 ELECTRICAL ENGINEERING » 29.120 Electrical fittings » 29.120.20 Connecting devices »

National standards » 29 ELECTRICAL ENGINEERING » 29.120 Electrical fittings » 29.120.20 Connecting devices »

National Standards for KGS (State Standards Classification) » Latest edition » E Power and electrical equipment » E7 Electrical apparatus and fittings » E78 Armature for various purposes »

National Standards for OKSTU » ELECTRICAL EQUIPMENT AND MATERIALS » Electrical devices for controlling electrical installations (except for electromagnetic contactors, electromagnetic starters, control and protection relays) »


As a Replacement Of:

GOST 10434-76: Electrical contact connections. General technical requirements

The Document References:

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 13276-79: Overhead line hardware. General specifications

GOST 14312-79: Electrical contacts. Terms and definitions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15543-70: Electrical articles. Applications for different climatic regions. General technical requirements as to environment climatic aspects influence

GOST 15963-79: Electrical articles for tropical application. General technical requirements and methods of testing

GOST 15975-70: Silicon grease type KB-3/10Э. Specifications

GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes

GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods

GOST 17441-84: Electrical contact connections. Acceptance and methods of tests

GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence

GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods

GOST 1759.5-87: Nuts. Mechanical properties and test methods

GOST 18311-80: Electrical products. Terms and definitions of basic concepts

GOST 19132-86: Contact clips for mounting in blocks

GOST 19357-81: Copper-aluminum connection plates

GOST 21242-75: Flat or pin contact terminals of electrical equipment. Main dimensions

GOST 21931-76: Tin-lead solders in the form of products. Specifications

GOST 22002.11-76: Hook cable terminals, with open tail, attached to conductor core and insulations. Construction and sizes

GOST 22002.12-76: Pin cable terminals, with open tail, attached to conductor core. Construction and sizes

GOST 22002.13-76: Pin cable terminals, with open tail, attached to conductor core and insulations. Construction and sizes

GOST 22002.14-76: Flag cable terminals, with open tail, attached to conductor core and insulations. Construction and sizes

GOST 22002.1-82: Ring cable terminals with close tail, attached to conductor core. Construction and sizes

GOST 22002.2-76: Ring bend cable terminals, with close tail, attached to conductor core. Construction and sizes

GOST 22002.3-76: Fork cable terminals, with close tail, attached to conductor core. Construction and sizes

GOST 22002.4-76: Hook cable terminals, with close tail, attached to conductor core. Construction and sizes

GOST 22002.5-76: Pin cable terminals, with close tail, attached to conductor core. Construction and sizes

GOST 22002.6-82: Ring cable terminals, with open tail attached to conductor core. Construction and sizes

GOST 22002.7-76: Ring cable terminals, with open tail, attached to conductor core and insulations. Construction and sizes

GOST 23598-79: Pin cable lugs. Construction and dimensions

GOST 24753-81: Contact terminals of electrical equipment

GOST 25034-85: Screw contact terminals

GOST 3057-90: Disk springs. Specifications

GOST 7386-80: Copper cable thimbles press-fastened. Construction and dimensions

GOST 7387-82: Aluminium alloy cable shoes for tipping of aluminium wire conductors and cables by welding. Construction and sizes

GOST 8024-90: Alternating current apparatus and devices for voltages above 1000 V. Temperature rise at continuous duty. Norms and test methods

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST 9.005-72: Unified system of corrosion and ageing protection. Metals, alloys, metallic and non-metallic coatings. Permissible and impermissible contacts with metals and non-metals

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9433-80: Grease ЦИАТИМ-221. Specifications

GOST 9581-80: Aluminium and copper-aluminium press-fastened thimbles. Construction and sizes

GOST 9688-82: Ring cable thimbles fastened by swaging. Design and dimensions

TU 34-13-11438-89: Pressed hardware clamps for open distribution devices

The Document is Referenced By:

GOST 10264-82: Light signaling fittings

GOST 10807-78: Road signs. General specifications

GOST 11677-85: Power transformers

GOST 12.2.139-97: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST 12434-83: Low-voltage switching devices. General specifications

GOST 12997-84: SSI Products. General specifications

GOST 13717-84: Pressure-operated indicating electrical-contact instruments

GOST 14693-90: Unsealed metal-enclosed switchgear

GOST 14695-80: Compact unit substations

GOST 14794-79: Concrete current-limiting

GOST 15027.7-77: Non-tin bronze. Methods for the determination of lead

GOST 15963-79: Electrical articles for tropical application. General technical requirements and methods of testing

GOST 16357-83: Nonlinear resistor-type arresters for standard ac voltage

GOST 16708-84: Rotary switches. General specifications

GOST 16920-93: Manometric thermometers and temperature transducers

GOST 17441-84: Electrical contact connections. Acceptance and methods of tests

GOST 17717-79: Alternating-current load-break cutouts for voltages of 3 to 10 kv

GOST 18140-84: SSI differential pressure gauges. General specifications.

GOST 18142.1-85: Semiconductor power rectifiers of 5 plus kw capacity

GOST 19132-86: Contact clips for mounting in blocks

GOST 19263-73: Mains busways up to 1200 V, dc. General technical conditions

GOST 19357-81: Copper-aluminum connection plates

GOST 19734-80: Input control devices for residential and public buildings

GOST 1983-2001: Voltage transformers. General specifications

GOST 1983-2015: Voltage transformers. General specifications

GOST 20248-82: Unit transformer substations from 25 to 2500 kV·A for voltage to 10 kV. Test methods

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 21242-75: Flat or pin contact terminals of electrical equipment. Main dimensions

GOST 22002.1-82: Ring cable terminals with close tail, attached to conductor core. Construction and sizes

GOST 22002.6-82: Ring cable terminals, with open tail attached to conductor core. Construction and sizes

GOST 22229-83: Ceramic through insulators for voltage over 1000 V. General specifications

GOST 22782.7-81: Explosion-proof electric equipment with "e" type protection

GOST 23469.0-81: Cable sleeves

GOST 23624-2001: Measuring laboratory current transformers. General specifications

GOST 23625-2001: Measuring laboratory voltage transformers. General specifications

GOST 23981-80: Cable lugs

GOST 24376-91: Semiconductor inverters

GOST 24607-88: Semiconductor frequency converters

GOST 24752-81: Trolley bus bars of voltage up to 1 000 v

GOST 24753-81: Contact terminals of electrical equipment

GOST 24754-2013: Mining electrical equipment of normal production. General technical requirements and test methods

GOST 24754-81: General purpose mining electric equipment

GOST 2492-84: Power push-button switches and push-button control stations. General specifications

GOST 25034-85: Screw contact terminals

GOST 26346-84: Lighting buses for the ac voltage up to 660 v

GOST 27632-88: Accelerators of charged particles of industrial application

GOST 27888-88: Rotating electrical machines. Built-in thermal protection. Rules for protection

GOST 28167-89: Semiconductor alternating voltage converters. General specifications

GOST 30011.3-93: Low - voltage switchgears and control gears. Part 3. Switches, disconnectors, switch - disconnectors and fuse-combination units

GOST 30011.5-93: Low-voltage switchgear and control gear

GOST 30373-95: Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, basic parameters, technical requirements and test methods

GOST 30850.1-2002: Switches for household or similar stationary electrical facilities. Part 1 General requirements and test methods.

GOST 31829-2012: Ozonization equipment. Safety requirements

GOST 32395-2013: Distribution boards for dwelling-houses. General specifications

GOST 32396-2013: Input-distributional boards for dwellings and public buildings. General specifications

GOST 32397-2013: Distribution boards for industrial and social buildings. General specifications

GOST 32676-2014: Smoothing reactors for railway traction substation. General specifications

GOST 32865-2014: Public roads. Signs with interchangeable symbols. Technical specifications

GOST 32945-2014: Public roads. Road signs. Technical specifications

GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements

GOST 33726-2016: Static non-tractive converters for railway rolling stock. General specifications

GOST 33798.2-2016: Railway applications. Electric equipment for rolling stock. Part 2. Electrotechnical components. General rules

GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements

GOST 34076-2017: Norms and rules of railway rolling stock fitting out with radio communication facilities and interference suppression devices

GOST 34433-2018: Trunk pipelines for oil and oil products transportation. Transformer complete substations with voltage from 35 to 220 kV. General specifications

GOST 34627-2019: Power semiconductor converters for diesel rolling stock. General parameters and general requirements

GOST 34806-2021: Electrical equipment for thermoelectric rolling stock. Selection and installation requirements

GOST 34839-2022: Couplings for power cables up to and including 35 kV. General specifications

GOST 35053-2023: Main pipeline transportation of oil and oil products. Provision of protection against lightning and static electricity. Basic provisions

GOST 403-73: Electrical apparatus for voltages up to 1000 V. Temperature rise limits of devices parts

GOST 5382-73: Cements. Chemical testing methods

GOST 6815-79: Mains and distribution busways up to 1000 V a.c. General specifications

GOST 687-78: Ac breakers for the voltage exceeding 1000 v

GOST 689-90: Disconnectors and ground-wires for alternating current with voltage over 1 000 v

GOST 7746-2001: Current transformers. General specifications

GOST 7746-2015: Current transformers. General specifications

GOST 7746-89: Current transformers. General specifications

GOST 8213-75: Automatic consumable electrode arc welding machines.

GOST 8709-82: Light boards for industrial and public buildings

GOST 9219-95: Electrical draft gears. General specifications.

GOST 9413-78: Lighting panels for dwelling-houses. General specifications

GOST 9601-84: Power track (limit) switches. General specifications

GOST 9688-82: Ring cable thimbles fastened by swaging. Design and dimensions

GOST 9986-78: SSI. Electropneumatic analogue transducers. General specifications

GOST R 50030.3-99: Low -voltage switchgear and controlgear. Pat 3. Switchers, disconnectors, switch-disconnectors and fure-combination units

GOST R 50030.5.1-2005: Low-voltage switchgear and controlgear. Part 5. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices

GOST R 50030.5.1-99: Low-voltage switchgear and control gear. Part 5.1. Control circuit devices and switching elements. Electromechanical control circuit devices

GOST R 50571.10-96: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 54. Earthing arrangements and protective conductors

GOST R 50571.25-2001: Electrical installations of buildings. Part 7. Requirements for special installations. Electrical installations of buildings and structures with electrical heating of floors and surfaces

GOST R 50911-96: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST R 51137-98: Asynchronous controlled variable electric drives for energetic objects. General specifications

GOST R 51324.1-2005: Switches for household and similar fixed electrical installations. General requirements and tests methods

GOST R 51324.1-99: Switches for household and similar fixed electrical installations. Part 1. General specifications and methods of tests

GOST R 51559-2022: Power oil transformers of 110 and 220 kV voltage classes and autotransformers of 27,5 kV voltage class for AC traction railway power supply systems. General specifications

GOST R 51628-2000: Distribution boards for dwelling-houses. General specifications

GOST R 51706-2001: Ozonisation equipment. Safety requirements

GOST R 51732-2001: Input-distributional boards for dwellings and public buildings. General specifications

GOST R 51778-2001: Distribution boards for industrial and social buildings. General specifications

GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements

GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications

GOST R 52719-2007: Power transformers. General specifications

GOST R 52726-2007: Alternating current disconnectors and earthling switches for voltage above 1 kV and operating mechanisms for them. General specifications

GOST R 52931-2008: Instruments for process monitoring and control. General specifications

GOST R 54392-2011: Electrical installations of livestock building. Methods of potential equalization

GOST R 54828-2022: Complete gas-insulated metal-insulated switchgear (GIS) for rated voltages of 110 kV and above. General specifications

GOST R 55190-2022: Complete metal-enclosed switchgear (GIS) for rated voltage up to 35 kV. General specifications

GOST R 55602-2013: Switching devices for railway traction network and power substations earthling. General specifications

GOST R 55607-2013: Electrical equipment (installations) for power supply systems of machines and devices In open-pit mining. General specifications

GOST R 55716-2013: High-voltage switchgear. General specifications

GOST R 55814-2013: Norms and rules of railway rolling stock fitting out with radio communication facilities and interference suppression devices

GOST R 55882.2-2013: Railway applications. Electric equipment for rolling stock. Part 2. Electrotechnical components. General rules

GOST R 56350-2015: Intelligent transport systems. Indirect management of traffic flow. Requirements for variable message sign

GOST R 56536-2015: Services of housing maintenance, public utilities and administration of apartment buildings. Services content in-house power supply systems of apartment buildings. General requirements

GOST R 58053-2018: Lifts. Installation, starting-up and adjustment works of dispatch control systems. Rules of the organization and manufacture of works, performance control and requirement for results of works

GOST R 58232-2018: Railway infrastructure objects. Complex protection against lightning and transient surges. General requirements

GOST R 58320-2018: Electrical installation of traction power supply systems of the DC railway. Grounding Requirements

GOST R 58321-2018: Electrical installation of traction power supply systems of the AC railway. Grounding Requirements

GOST R 58409-2019: Unpackaged complete distribution devices for voltage up to 35 kV for traction and transformer substations of the railway. General specifications

GOST R 58585-2019: Mining equipment. General safety requirements for power supply and control systems

GOST R 58707-2019: Board electronic game for volleyball, basketball, football, handball with a protective screen. Technical requirements and test methods

GOST R 58786-2019: Electrical equipment for nuclear power plants. General technical requirements

GOST R 58872-2020: Marine cable lugs with flat clamping part for conductors up to 16 mm2. Technical requirements

GOST R 58882-2020: Grounding devices. Potential equalization systems. Earthing switches. Grounding conductors. Technical requirements

GOST R 70303-2022: Low voltage systems. Cable systems. Grounding of telecommunication systems. General requirements

GOST R 70320-2022: Charging and charging converters and uninterruptible power supply devices for railway traction substations, transformer substations and linear devices of railway traction power supply system. General specifications

GOST R 70352-2022: Fittings for overhead power lines up to 1 kV with self-supporting insulated wires. General specifications

GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications

GOST R 70617-2022: Details of the grounding of marine electrical equipment and cables. Specifications

I 1.03-08: Instructions for protective grounding and potential equalization in electrical installations

I 1.09-10: Instructions for connecting insulated conductors of wires and cables

MEK 364-5-54: Electrical installations of buildings. Part 5. Selection and installation of electrical equipment. Chapter 54. Grounding Devices and Protective Conductors

Order 1317: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured

Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured

Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured

OST 16-0.684.032-92: Interior electrical installation of electrical products. General technical requirements.

OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions

OST 36-66-82: Branching and screw die clamps (clips). Technical conditions

OST 45.183-2001: stationary Installations of Electrical power of electrical connection apparatus. General technical requirements.

PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements

PNST 282-2018: Instrument transformers. Part 1. General specifications

POT R O 29-001-93: Labor protection regulations for printing companies

POT R O-29-002-94: Occupational Safety Rules for Publishers

POT R O-29-003-95: Occupational Safety Rules for Bookstores

POT R O-45-001-94: Rules on labor protection in institutions and enterprises of the postal service and Rospechat

PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Applications

PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)

RD EO 1.1.2.01.0713-2013: Provisions on acceptance and testing form conformity assessment for nuclear plants.

RD IATs 2.004-97: Passenger and freight elevators. Guidelines for testing insulation resistance, protective earth and loop phase-zero

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR

SNiP 3.05.06-85: Electrical devices

SNiP 3.05.07-85: Automated systems

SO 153-34.03.603-2003: Guidelines for Use and Testing of Protective Means Used in Electrical Installations

SP 120.13330.2012: Subway systems

SP 256.1325800.2016: Electrical equipment of residential and public buildings. Rules of design and erection

SP 32-105-2004: Subways

SP 423.1325800.2018: Electrical installations low-voltage buildings and structures. Explosion hazard design guidelines

SP 437.1325800.2018: Electrical installations low-voltage buildings and structures. Design Rules for Electric Shock Protection

SP 76.13330.2016: Electrical systems

STB 1140-2013: Technical means of traffic management. Traffic signs. General specifications

TU 16-674.073-86: Short circuit breakers of types KRN and KZ for voltage classes 35, 110, 150 and 220 KV

TU 4218-003-17416124-99: Connection box for electrical wiring. Technical conditions

VNTP 5-95: Norms of technological design of enterprises for provisioning with petroleum products (petroleum storage depots)

VSN 139-83: Guidelines for the Termination, Connection, and Branching of Aluminum and Copper Conductors of Insulated Wires and Cables and for Their Connection to Contacts of Electrical Installations

VSN 164-82: Design and Installation Guidelines to Busways-to-Busway Contact Connections and Connections of Busways to Utilization Equipment Leads

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!