GOST 18140-84
ГОСТ 18140-84
|
|
SSI differential pressure gauges. General specifications.
Манометры дифференциальные ГСП. Общие технические условия
Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)
The standard applies to indicating and recording differential pressure gauges used in process control and management systems for measuring, monitoring, recording, adjusting and converting to a unified output signal the following parameters: flow rate, liquid, gas or steam by pressure drop in constricting devices; differences in vacuum and overpressure; fluid level pressure hydrostatic column, which is under atmospheric, overpressure or vacuum pressure. The standard does not apply to differential meters: exemplary; liquid with a visible level; automatically taking into account the actual values of pressure, temperature, humidity and density; non-interchangeable differential-transformer systems that make up separate telemetry systems with secondary devices; with manual aiming; differential pressure transducers (sensors) (pressure differential).
Стандарт распространяется на показывающие и самопишущие дифференциальные манометры, применяемые в системах контроля и управления технологическими процессами для измерения, контроля, записи, регулирования и преобразования в унифицированный выходной сигнал параметров: расхода жидкости, газа или пара по перепаду давления в сужающих устройствах; разности вакуумметрических и избыточных давлений; уровня жидкости по давлению гидростатического столба, находящейся под атмосферным, избыточным или вакуумметрическим давлением. Стандарт не распространяется на дифманометры: образцовые; жидкостные с видимым уровнем; автоматически учитывающие действительные значения давления, температуры, влажности и плотности; невзаимозаменяемые дифференциально-трансформаторной системы, составляющие с вторичными приборами отдельные телеметрические комплексы; с ручной наводкой; измерительные преобразователи (датчики) разности давлений (перепада давления).
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
5/31/1984
SKU: RUSS19033
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.2 Instruments for measuring pressure, volume, flow, level, time and mechanical quantities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.100 Measurement of force, weight and pressure »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.100 Measurement of force, weight and pressure »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P1 Instruments for measuring pressure, volume, flow, level, time and fur »
P14 Instruments for measuring pressure, depression and level »
As a Replacement Of:
GOST 17787-74: Devices of the manometric principle of operation, self-recording with a pneumatic control device GSP. General specifications
GOST 18140-77: SSI differential pressure gauges. General specifications
The Document References:
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 12997-84: SSI Products. General specifications
GOST 13033-84: Gsp. Electrical analog equipment and means for automation
GOST 13053-76: Ssi pneumatic instruments and devices
GOST 13717-84: Pressure-operated indicating electrical-contact instruments
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 14254-80: Electrotechnical articles. Enclosures. Degrees of protections. Designations. Test methods
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16920-93: Manometric thermometers and temperature transducers
GOST 18953-73: SSI electrical power supply units
GOST 2.601-68: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 21128-83: Power supply systems, nets, sources, converters and receivers of electric energy. Rated voltages to 1000 V
GOST 21657-83: Electrical insulation products SHG. Technical requirements. Methods of tests
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 25154-82: Terminal contact blocks with flat terminals. Design, main parameters and dimensions
GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25164-96: Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25165-82: Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements
GOST 25705-83: Clamps, contact type, with female terminals. Design, main parameters and dimensions
GOST 26.010-80: Unified system of standards for instrument-making. Measuring and automation devices. Input and output frequency electric continuous signals
GOST 26.011-80: Measuring and automation devices. Input and output current and voltage continuous signals
GOST 26.015-81: Measuring and automation devices. Pneumatic input and output signals
GOST 26969-86: Standard orifice plates for flow meters. Specifications
GOST 27.502-83: Reliability engineering. Information collecting and processing system. Planning of observations
GOST 27.503-81: Reliability engineering. Methods for assessing reliability indicators
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 5365-83: Electrical measuring instruments. Dials and scales. General technical requirements
GOST 7826-82: Strip and circular charts of registers. General technical specifications
GOST 7826-93: Strip and circular charts of registers. General specifications
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.052-73: State system for ensuring the uniformity of measurements. Differential pressure gauges with pneumatic output. Verification methods and means
GOST 8.146-75: State system for ensuring the uniformity of measurements. Indicating and recording pressure gauge with integrator of SSI. Methods of verification
GOST 8.240-77: State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified current output signals of the SSI. Methods and means of verification
GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements
GOST 8.563.1-97: Measurement of liquids and gases flow rate and quantity by differential pressure method orifice plates, nozzles isa 1932 and ventury tubes inserted in circular cross-section filled conduits.
GOST 8.563.2-97: Measurement of liquids and gases flow rate and quantity by differential pressure method measurement procedure by orifice instruments official edition
GOST 8.563.3-97: Procedure and module of calculations software
GOST 8624-80: Manometric thermometers GSP. General specifications
GOST 9988-84: Pneumatic regulator devices of SSI. General specifications
RD 50-690-89: Methodological instructions. Industrial product dependability. Methods for estimating dependability based on experimental data.
The Document is Referenced By:
GOST 12.3.018-79: Occupational safety standards system. Ventilation system. Aerodynamical test methods
GOST 13211-80: Shell and tube water-oil and water-water type coolers of diesels engines and gas engines. General specifications
GOST 13717-84: Pressure-operated indicating electrical-contact instruments
GOST 14167-83: Turbine cold water meters
GOST 14753-82: Indicating and recording pneumatic monitoring instruments of ssi
GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement
GOST 19862-87: Pneumatic drives. Methods of measuring parameters
GOST 20073-81: General-purpose stationary air piston compressors. Acceptance rules and methods of tests
GOST 20525-75: Filter ventilation installations for trucks. Methods for determination of capacity and positive pressure
GOST 23720-79: Venturi tubes. Specifications
GOST 26548-85: Air heaters. Methods of tests
GOST 30573-98: Foundry equipment. Installations for casting of aluminum alloys. General specifications
GOST 30647-99: Casting equipment. Casting machines under low pressure. General specifications.
GOST 31167-2003: Buildings and structures. Methods for determination of air permeability of building envelope in field conditions
GOST 31167-2009: Buildings and structures. Methods for determination of air permeability of building envelopes in field conditions
GOST 33792-2016: Front facade translucent structures. Methods for determining air and water permeability
GOST 33793-2016: Front facade translucent structures. Methods for determining wind load resistance
GOST 33885-2016: Passenger cars on locomotive traction. Test methods of sanitary-hygienic and ecological indicators
GOST 34060-2017: Internal buildings and structures utilities. Testing and adjusting the ventilation systems and air-conditioning. Rules of carrying out and control of performance of works
GOST 8220-85: Underground fire hydrants. Specifications
GOST R 56393-2015: Passenger cars on locomotive traction. Test methods of sanitary-hygienic and ecological indicators
GOST R 71300-2024: Mining equipment. Explosion protection means in gas suction and degassing pipelines and installations. General technical requirements and test methods
IM 14-10-2005: Automation. Secondary instruments for measuring unified current and voltage GPS signals. Directory
MI 2203-92: Recommendation. State system for ensuring uniformity of measurements. Test methods for measuring pressure. Datasheets
MI 2406-97: State system for ensuring uniformity of measurements. Liquid flow in open channels of water supply and sewage systems. Measurement Technique Using Standard Weirs and Trays
RD 153-34.0-11.339-97: Methods of measurement of water flow large diameter pipes.
RD 153-34.0-11.343-00: Method for Measurements of Flow Rate and Quantity of Steam Released from Heat Sources in Piped Steam Heat Supply Systems
RD 153-34.0-11.346-00: Method for Measurements of Flow Rate and Quantity of Heat Transfer Agent in Piping of Piped Hot Water Heat Supply Systems to Heat Source
RD 153-34.0-11.350-00: Method for Measurements of Flow Rate and Quantity of Condensate Returned to Heat Source from Piped Steam Heat Supply Systems
RD 153-34.1-11.354-2001: Recommended Practice for Design and Use of Special Orifice Devices for Measurement of Fuel Oil Consumption at Thermal Power Stations
RD 153-34.1-27.301-2001: Test methods for ash collecting plants of thermal power plants and boilers
RD 153-39-019-97: Methodical instructions for determining the technological losses of oil at the enterprises of oil companies of the Russian Federation
RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations
RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers
RD 50-411-83: Methodological instructions. liquids and gases flow rate. Measurement technique using special orifices.
SO 34.26.721: Guidelines for testing steam boilers for separate combustion of natural gas and fuel oil
SO 34.26.726: Guidelines for setting up power regulators for drum steam boilers
ST RK 1976-2010: Fire engineering. Tower ladders. General specification
ST RK 1980-2010: Fire engineering. Basic fire fighting trucks. General specification
ST RK 1981-2010: Fire engineering. Fire aerial ladders. General specification
TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
