GOST 18599-83
ГОСТ 18599-83
|
|
Polyethylene pressure pipes
Трубы напорные из политэлена
Status: Not effective - Superseded. IUS 6-2002
The standard applies to pressure pipes of annular section, made of low-pressure polyethylene with a permissible stress in the pipe wall of 5 MPa and high-pressure polyethylene with a permissible stress in the pipe wall of 2.5 MPa, intended for pipelines transporting water, including for drinking water. water supply, and other liquid and gaseous substances, to which polyethylene is chemically resistant.
Стандарт распространяется на напорные трубы кольцевого сечения, изготовленные из полиэтилена низкого давления с допускаемым напряжением в стенке трубы 5 МПа и полиэтилена высокого давления с допускаемым напряжением в стенке трубы 2,5 МПа, предназначенные для трубопроводов, транспортирующих воду, в том числе для хозяйственно-питьевого водоснабжения, и другие жидкие и газообразные вещества, к которым полиэтилен химически стоек.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
9/10/1983
SKU: RUSS19037
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.2 Plastic Products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.30 Plastic pipes, fittings not for liquids »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.30 Plastic pipes, fittings not for liquids »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L26 Plastic products »
National Standards for OKSTU »
POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS »
Thermoplastic pipes and pipeline parts »
The Document is Replaced With:
GOST 18599-2001: Polyethylene pressure pipes. Specifications
As a Replacement Of:
GOST 18599-73: Polyethylene pressure pipes. Specifications
The Document References:
GOST 11262-80: Plastics. Tensile strength test method.
GOST 11951-82: Wall-mounted display windows with a division price of 0.01 and 0.1 mm. Specification
GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 14192-77: Marking of cargoes
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16337-77: High-pressure polyethylene. Specifications
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 166-80: Vernier callipers. Specifications
GOST 18599-73: Polyethylene pressure pipes. Specifications
GOST 20477-86: Polyethylene tape with adhesive layer. Specifications
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure
GOST 26277-84: Plastics. Preparation of test specimens by machining
GOST 27078-86: Thermoplastic pipes. Methods of determination of the tubes length after heating
GOST 6507-90: Micrometers. Specifications
GOST 7502-80: Measuring metal tapes. Specifications
The Document is Referenced By:
GOST 14022-88: Anhydrous hydrogen fluoride
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 17.2.4.06-90: Environment protection. Atmosphere. Methods for determination of velocity and flow rate of gas-and-dust streams from stationary sources of pollution
GOST 17.2.4.08-90: Environment protection. Atmosphere. Methods of determination of humidity of gas-and-dust streams from stationary sources of pollution
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 22689.0-89: Polyethylene waste-pipes and fittings. General specification
GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications
GOST R 50820-95: Scrubber and duster equipment. Methods of determination of dust load of gas-and-dust streams
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
M788-1073: Electrical Construction Documents. General Requirements and Guidelines on Composition and Format
Manual for SNiP 2.02.01-83: Manual on the design of protection of mine workings from underground and surface waters and water reduction during the construction and operation of buildings and structures
Manual for SNiP 2.02.01-83: Guide to designing the foundations of buildings and structures
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.05-91: Benefit 5.91. Placement of ventilation equipment.
Manual for SNiP 2.04.05-91: Benefit 7.91. Duct layouts in a building
Manual for SNiP 2.04.05-91: Allowance 6.91. Fire resistant ducts.
Manual for SNiP 2.04.05-91: Benefit 3.91. Fan units
Manual for SNiP 2.04.05-91: Manual 4.91. Smoke protection in case of fire
Manual for SNiP 2.04.05-91: Allowance 14.91. New schemes and solutions for smoke protection of staircase elevators of multi-storey buildings
Manual for SNiP 2.04.05-91: Allowance 15.91. Smoke protection in case of fire and ventilation of underground car parks
Manual for SNiP 2.04.05-91: Benefit 2.91. Calculation of the receipt of heat of solar radiation in the premises
Manual for SNiP 2.04.05-91: Allowance 13.91. Fire protection requirements for heating, ventilation and air conditioning systems
Manual for SNiP 2.04.05-91: Benefit 8.91. The number of personnel operating heating, ventilation and air conditioning systems
Manual for SNiP 2.04.05-91: Manual 10.91 Designing Corrosion Protection
Manual for SNiP 2.04.05-91: Manual 1.91 Calculation and Distribution of Supply Air
Manual for SNiP 2.04.05-91: Allowance 12.91. Recommendations for calculating outdoor air infiltration in one-story industrial buildings
Manual for SNiP 2.04.05-91: Benefit 9.91. Annual energy consumption by heating, ventilation and air conditioning systems
Manual for SNiP 2.06.15-85: Flood forecasts and calculation of drainage systems in built-up and built-up areas
OST 36-141-87: free metal Flange for plastic pipes for Pnom. to 1.0 MPa. Specifications.
OST 36-56-81: Plastic pipelines. Connecting parts, welded and molded from polyethylene pipes for pressure pipelines. Technical requirements
R 415-81: Recommendations for welding of gas and oil field pipe mix from polyethylene
RD 107.460007.007-92: Plastic materials. Selection manual.
RD 52.37.615-2000: Instructions. The procedure for ensuring the safety of work on the active influence on meteorological and other geophysical processes
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RM 4-246-91: Automation systems. General requirements for CAD
RM 4-6-92: Process automation systems. Design of electrical and pipe wiring. Part 3. Guidelines for the implementation of the documentation. Allowance for RTM 36.22.7-92
RM4-224-89: Process automation system. Requirements for performance of electric installations of automation systems in fire-hazardous zones
RTM 36.44.15.3-87: Recommended Practice for Fabrication of Polyethylene and Polypropylene Pipe Fittings Used for Installation of Process Piping
SN 478-80: Guidelines for the Design and Installation of Water Supply and Sewer Systems Made of Plastic Pipes
SNiP 3.05.07-85: Automated systems
SNiP III-34-74: Automation Systems
SP 40-102-2000: Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80
SZK 4-1-93: Instruments for measuring and regulating temperature. Part 2. Installation on plastic pipelines
TR 75-98: Guide to Good Practice for the Design and Installation of Underground Communications Ducts Made of Plastic Pipes
TR 76-98: Guide to Good Practice for Using Plastic Pipes of Various Types as Electrical Conduits
TR 94.13-01: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 13: Installation Quality Control of Building Services Systems
TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm
TU 576431-009-01297858-99: Pipeline elements with polyurethane foam insulation. Technical conditions
TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines
TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines
TU 6-49-14-89: Connecting parts from high-pressure polyethylene for pressure pipes
TU 95 1613-01: Polyethylene heat shrink tubes. Technical conditions
VSN 003-88: Design and Installation Guidelines to Plastic Piping
VSN 211-88: Guidelines for the Installation of Collective Domestic Water Supply Systems with New-Generation Flexible Connectors to All Plumbing Fixtures
VSN 34-72-019-89: Designing the lining of underground machine rooms of hydroelectric power stations, PSPP and other chamber workings in hydraulic engineering construction
VSN 35-86: Guidelines for Installation of Plastic Piping at USSR Gosagroprom Facilities
VSN 370-93: Instructions for the installation of electrical wiring in pipes
VSN 506-88: Design and construction of ground anchors
VSN 8-94: Industry-Specific Building Code for Installation of Domestic Water Supply Systems Equipped with Water Meters, Backflow/Distribution Valves, and Flexible Connectors for Plumbing Fixtures
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.