imgalt

GOST 19281-89

ГОСТ 19281-89

Rolled steel with increased strength. General specifications

Прокат из стали повышенной прочности. Общие технические условия

Status: Restored in the Russian Federation for individual industries. By order of the Federal Agency for Technical Regulation and Metrology dated 01.03.2016 No. 101-st, it was restored on the territory of the Russian Federation only in relation to products delivered under the State Defense Order; IUS 6-2016

The standard applies to plate, broadband universal, shaped, long products and curved profiles of high strength steel used for welded, riveted or bolted structures and used in products, mostly without additional heat treatment. In terms of the norms of chemical composition, the standard also applies to thin sheets, ingots, slabs, blooms, forgings and stampings.

Стандарт распространяется на толстолистовой, широкополосный универсальный, фасонный, сортовой прокат и гнутые профили из стали повышенной прочности, применяемые для сварных, клепаных или болтовых конструкций и используемые в изделиях, в основном, без дополнительной термической обработки. В части норм химического состава стандарт распространяется также на тонкий лист, слитки, слябы, блюмсы, поковки и штамповки.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 9/28/1989

SKU: RUSS19038

Price: $132.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Standards for pipe fittings (TPA) » 10. Production » 10.2 Billets (forgings, stampings, rolling, castings, etc.) »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V2 Carbon steel of ordinary quality (ordinary stock) » V20 Classification, nomenclature and general rules »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » Structural steel bars »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » High quality bar steel, except for structural steel »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » High-quality sheet products (without cold-rolled structural, stainless and transformer steel) »

National Standards for OKSTU » PRODUCTS OF FURTHER TRANSITION FROM ROLLED METAL, BALLS, CILBEPS » Bent steel profiles »


The Document is Replaced With:

GOST 19281-2014: High strength rolled steel. General specification

As a Replacement Of:

GOST 19281-73: Low alloyed sorted and shaped steel

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

The Document References:

GOST 103-2006: Hot-rolled steel strips. Dimensions

GOST 103-76: Hot-rolled steel strip. Dimensions

GOST 10551-75: Steel roll-formed corrugated sections. Range

GOST 11474-76: Bent-steel sections. Specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12361-82: Alloyed and high-alloyed steels. Methods for determination of niobium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 13229-78: Steel bent Z-shaped sections. Dimensions

GOST 14019-2003: Metallic materials. Bend test method

GOST 14019-80: Metals. Methods of bend tests

GOST 14635-93: Special roll-formed steel sections for railway car building

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 1497-84: Metals. Methods of tension test

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions

GOST 19771-93: Roll-formed steel equal leg angles. Dimensions

GOST 19772-93: Roll-formed steel unequal les angles. Dimensions

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 21026-75: Hot-rolled sections with outward flanges for trolleys. Dimensions

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications

GOST 2590-2006: Round hot-rolled steel bars. Dimensions

GOST 2590-88: Round steel bars. Dimensions

GOST 2591-2006: Square hot-rolled steel bars. Dimensions

GOST 2591-88: Square Hot-rolled Steel Bars Dimensions

GOST 26020-83: Hot-rolled steel I-beam with parallel flange edges. Dimensions.

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 535-88: Common quality carbon bar and shaped sections. General specifications

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7511-73: Steel sections for window and lantern transoms and window panels of industrial buildings. Specifications

GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 8239-89: Steel hot-rolled I-beams

GOST 8240-89: Steel hot-rolled channels

GOST 8240-97: Hot-rolled steel channels. Assortment

GOST 82-70: Universal hot-rolled steel wide strips. Dimensions

GOST 8278-83: Roll-formed steel equal channels. Dimensions

GOST 8281-80: Roll-formed steel unequal channels Dimensions

GOST 8282-83: Bent-steel С-shaped equal flange sections. Dimensions

GOST 8283-93: Bent steel hat equal profiles

GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions

GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions

GOST 9234-74: Steel bent sheet sections with trapezoid-shaped corrugation. Dimensions

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

The Document is Referenced By:

ATK 24.218.01-90: Bosses, Plugs, and Gaskets. Design, Dimensions, and General Technical Specifications

ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements

ATK 26-18-5-93: Album typical designs. Steel turning plugs for rebar flanges. Design, dimensions and specifications

GOST 10304-80: Rivets

GOST 10527-84: Four-wheel bogies of passenger cars for mainline railways gauge 1520 mm. Specifications

GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10935-82: Freight box cars of mainline railways, gauge 1520 mm, technical requirements

GOST 10935-97: Box-cars for 1520 mm gauge main line railways. General specifications

GOST 11004-84: Principal ventilation mine blowers

GOST 11474-76: Bent-steel sections. Specifications

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 12492.0-90: Rolled stock for agriculture machinery

GOST 12492.1-90: Agricultural machinery. Channel section. Dimensions

GOST 12492.4-90: Agricultural machinery. One-notched section. Dimensions

GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 13663-86: shaped steel pipes technical requirements

GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation

GOST 1561-75: Air reservoirs for railway car automatic brakes. Specifications

GOST 15851-84: Suspension devices for mine cages

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 17066-80: Low-alloyed structural steel sheets and strips in coils. Marks and technical requirements

GOST 17066-94: Thin sheet rolled stock of high strength steel

GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications

GOST 18048-80: Reinforced concrete sanitary cabins. Specifications

GOST 18128-82: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 21348-75: Holes for threading pipe cylindrical thread. Diameters

GOST 21350-75: Holes for threading pipe taper screw thread. Diameters

GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications

GOST 21807-76: Concrete mixture conveying buckets to 2 cub m volume. General specifications

GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment

GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications

GOST 2224-93: Steel eye rings for wire cables

GOST 22584-88: Rope electric hoists. Specifications

GOST 22797-83: Assembly units and pipeline parts. Abutment for bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 23270-89: Tube-billets for machining

GOST 23581.22-81: Iron ores, concentrates, agglomerates and pellets. Methods for the determination of nickel protoxide

GOST 24379.0-2012: Foundation bolts. General specifications

GOST 24379.0-80: Foundation bolts. General specification

GOST 25573-82: Freight handling rope slings for construction

GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications

GOST 26686-96: Flat car backtone railroad bore 1520 mm gauge. General technical specifications

GOST 26725-97: Freight gondolas for main lines with the track 1520 mm. General specifications

GOST 26887-86: Platforms and ladders for civil engineering work. Specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 28433-90: Retrievers

GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design

GOST 30243.1-97: Open hopper wagons of 1520 mm gauge for the loose materials. General specifications

GOST 30243.2-97: Covered hopper wagons of 1520 mm gauge for the transport of cement. General specifications

GOST 30243.3-99: Covered hopper wagons for loose materials of 1520 mm gauge. General specifications

GOST 30245-2003: Steel bent closed welded square and rectangular section for building constructions. Specifications

GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications

GOST 30482-97: Electroslag welding of steels. Requirements for technological process

GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications

GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications

GOST 30776-2002: Oil field mobile pumping units. General specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32020-2012: Elastomeric bearings for bridge building. Specifications

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32578-2013: Cranes. Metal structures. Requirements for materials

GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33796-2016: Railway multiple units. Durability and dynamics requirements

GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 4686-74: Brake beams of brake leverage gear for 1520 (1524) mm wide gauge main-line railway freight car bogie-trucks. Specifications

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 5521-86: Weldable steel for shipbuilding

GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications

GOST 5973-91: Dump cars for 1520 mm railway gauge. General specifications

GOST 6625-85: Mine local ventilating fans

GOST 6713-75: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 82-70: Universal hot-rolled steel wide strips. Dimensions

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications

GOST 8802-78: Passenger tram-cars. Specifications

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.402-80: Metal surface preparation for painting

GOST 9.911-89: Unified system of corrosion and ageing protection. Atmospheric steel. Accelerated corrosion test method

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking

GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions

GOST R 52400-2005: Air reservoirs for railway brakes. General specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52664-2006: Welded pipe sheet piles. General specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 52857.1-2007: Vessels and apparatus. Norms and methods of strength calculation. General requirements

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 53628-2009: Metal roller bearing parts for bridge building. Specifications

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 53932-2010: Tube billet. General specifications

GOST R 53978-2010: Special railway rolling stock. General technical requirements

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications

GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications

GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 55727-2013: Mining equipment. Mine loading cars. General technical requirements and test methods

GOST R 55738-2013: Studs and ceramic ferrules for stud welding

GOST R 55819-2013: Brake block holder and key for railway rolling stock. General specifications

GOST R 55821-2013: Bogies of passenger cars on locomotive traction. Specifications

GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries

KPO 01.05.12-05: Catalog-list of equipment. Boiler equipment. Volume 2

KPO 01.05.12-05: Catalog-list of equipment. Boiler equipment. Volume 2

L8-138.000 - L8-200.000: Supports and suspensions of fixed pipelines with the parameters of the medium RR <= 2.2 MPa (22 kgf / cm2) and ter. <= 425 degrees Celsius of TPP, nuclear power plant and dust and gas pipelines of TPP from unified parts. Part 2. Supports movable and fixed

Manual for SNiP 2.09.03-85: Design of retaining walls and basement walls

Manual for SNiP 2.09.03-85: Design of open crane overpasses

Manual for SNiP 2.09.03-85: Design Guide for Anchor Bolts for Securing Building Structures and Equipment

Manual for SNiP 2.09.03-85: Manual on designing stand-alone supports and overpasses for process pipelines

Manual for SNiP 2.09.03-85: Conveyor Gallery Design Guide

Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV

Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures

Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies

MDS 53-1.2001: Recommended Practice for Installation of Steel Structural Elements

MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)

ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts

ODM 218.2.025-2012: Expansion joints of automobile bridges

ODM 218.2.076-2019: Recommendations on the use of composite structures for areas with extreme temperature conditions (below minus 40 degrees Celsius and above plus 40 degrees Celsius)

ODN 218.0.032-2003: Interim Guidelines for Determining the Carrying Capacity of Bridge Structures on Roads

OST 153-34.0-969-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). General technical requirements

OST 153-34.0-969-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. General technical requirements.

OST 153-34.0-984-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). General technical requirements

OST 24.125.02-89: Welded butt joints of npp pipelines. Types and basic dimensions

OST 24.125.31-89: Welded seams for CHP plant pipeline joints. Types and main dimensions.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.460-99: Lobes, locks and pads. Design, dimensions and general technical requirements.

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-02-601-72: Support lattices under ring packing. Main dimensions and technical requirements.

OST 26-02-602-72: Supporting beams for ring fillings. Design, main dimensions and technical requirements.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 26-2015-83: Hinge and tilt-up Devices for manhole covers of welded steel of vessels and apparatuses. Technical requirements .

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 26-2091-93: Horizontal support vessels and equipment. Design.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements

OST 34-10-569-93: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-573-93: Corner single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-577-93: Angular, single-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions

OST 34-10-699-97: Parts of seamless steel welded pipelines on Rrab <2.2 MPa (22 kgf

OST 34-10-700-97: Parts of seamless steel welded pipelines on Rrab <2.2 MPa (22 kgf

OST 34-10-723-93: Assembling units and station pipeline hang details, Working pressure<2,2 MPa of CHP plant, nuclear thermal power plant and dust-and-gas windpipes of CHP plant. General technical requirements.

OST 34-10-733-93: Lug with lining. Design and dimensions.

OST 34-10-735-93: Clip for horizontal pipelines. Design and dimensions.

OST 34-10-736-93: Clip for vertical pipelines. Design and dimensions.

OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-58-81: Steel building structures. Welding. Basic requirements.

OST 36-60-81: Welding at installation of steel building constructions. Main provisions.

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 09-592-03: Rules for arrangement and safe operation of refrigerating systems

PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PGVU 242-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round single-lens compensator for gas and air ducts

PGVU 243-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round double compensator for gas and air ducts

PGVU 244-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Three-way round compensator for gas and air ducts

PGVU 245-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Four-sided round compensator for gas and air ducts

PGVU 246-92: Compensator, rectangular single lens for gas and air ducts

PGVU 247-92: Compensator, rectangular two-lens for gas and air ducts

PGVU 248-92: Three-slip rectangular compensator for gas and air ducts

PGVU 249-92: Four-sided rectangular compensator for gas and air ducts

R 001-98: Guide to the design of steel structures of objects of large-volume blast furnaces

R 51-31323949-58-2000: Guidelines for the Application of Steel Pipe in the Oil and Gas Industry

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 11-288-99: Method for determining the technical condition of the blast-furnace and air heater housings

RD 12.18.099-90: Instructions for the design and installation of reinforcement for vertical shaft shafts with fastening reinforcement elements on anchors

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 22-207-88: Lifting machines. General requirements and production standards

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 24.942.02-90: Electroslag welding of chemical and petroequipment from low-alloyed and heat-resistant steels

RD 24-112-4R: Guidelines for the assessment of the residual life of gantry cranes

RD 26.260.12-99: Service life extension of liquid carbon dioxide vessels. Instructional guidelines.

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures

RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities

RD 34.17.203-76: Technological guidelines for the use of mechanized methods of welding with flux-cored wires in the manufacture and installation of steel structures and non-standard equipment in the construction of thermal power plants

RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95

RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (

RD 4-VEP: Guiding document on the use of axial bellows expansion joints (KSO-TPZ) for the technical specifications of TU 3-120-81 OAO Tula Cartridge Plant and starting bellows compensators (KSS-TPZ) for the technical specifications of TU 3695-056-08629358- 2000 OJS

RD 50:48:0075.02.05: Platform buffers. Recommendations for design, construction and operation

RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks

RD 50-9.645-87: Guidelines. General requirements for the selection of metals and alloys used without coatings in atmospheric conditions

RD 5-VEP: Guidance document on the use of axial bellows expansion joints of OJSC Metalomp in the design, construction and operation of heating networks according to technical specifications TU 5-99 NFCP.302667.310 TU (SK-160.000.00.TU) "Compensators bellows" SK-MK

RD EO 1.1.2.25.0937-2013: Nondestructive control. Uniform requirements for the form and content of technological maps

RD RTM 26-07-246-80: Design, manufacturing and control regulations for steel pipeline fittings welded joints.

RDI 26-15-80: Instructions for making inner vessels of isothermal tanks for liquefied carbon dioxide

Resolution: Rules for the design and safe operation of steam and hot water boilers

RM 4-264-92: Automation systems. Recommendations for the design of steel structures for wiring and installation of automation equipment

RTM 26-07-141-73: Details of pipe valves. Heat treatment of billets made of carbon and alloyed structural steels.

RTM 38.001-94: Guidelines for the calculation of strength and vibration of technologically steel pipe.

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

Safety Guide: Recommendations on arrangement and safe operation of process pipelines

Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products

SNiP 2.05.03-84*: Bridges and pipes (Appendices 1-20)

SNiP 2.05.03-84*: Bridges and pipes (Appendices 21-29)

SNiP 3.06.04-91: Bridges and pipes

SP 16.13330.2011: Steel structures

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 41-104-2000: Design of independent heat supply sources

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems

SP 46.13330.2012: Bridges and pipes

SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design

SP 53-102-2004: General rules for steel structure design

ST RK 1358-2005: Pressure vessels. Requirements for welding steels

ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure

ST RK 1667-2007: Materials of construction for the body of passenger cars and multiple units. Technical requirements and testing methods

ST RK 1858-2008: Bridgeworks and culverts on motor roads. Requirements at designing of concrete and reinforced concrete structures

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications

STN TsE 141-99: Design norms for contact network

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP

TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications

TU 102-488-95: Connecting parts and nodes of trunk pipelines on RR up to 10 MPa (100 kgf / cm2)

TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines

TU 14-159-1128-2008: Steel and seamless hot-deformed cold-resistant pipes for gas pipelines of gas-lift systems and arrangement of gas fields

TU 14-161-184-2000: Steel seamless tubes of steel grade 09G2S

TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions

TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines

TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision

TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines

TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions

TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications

TU 14-3R-251-2007: Seamless steel pipes for chemical and petrochemical plants with conditional pressure Py = 19.6 - 98 MPa (200 - 1000 kgf/cm2)

TU 14-3R-44-2001: Seamless hot-deformed steel pipes for oil and gas pipelines. Technical conditions

TU 14-3R-51-2001: Seamless steel pipes, hot-rolled, thick-walled for mechanical engineering

TU 1469-006-00153229-2001: Parts connecting on Рр up to 16 MPa (160 kgf

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

TU 3680-001-04698606-04: Pipe Support

TU 4834-020-01297858-2006: P1 Welded Composite Coupling

TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions

VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!