GOST 28408-89
ГОСТ 28408-89
|
|
Manual hoists and trolleys. General specifications
Тали ручные и кошки
Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
This standard applies to manual worm and stationary mobile hoists with a carrying capacity of 1 and 3.2 tons, manual gear stationary hoists with a loading capacity of 0.5 to 5.0 tons and cats with a manual drive with a loading capacity of 0.5 to 3.2 tons with a movement and without it. This standard does not apply to hoists and cats intended for use in radioactive, explosive and fire hazardous environments, as well as hoists and cats intended for lifting and moving people, explosives and toxic substances, liquid and red-hot metal.
Настоящий стандарт распространяется на ручные червячные стационарные и передвижные тали грузоподъемностью 1 и 3,2 т, ручные шестеренные стационарные тали грузоподъемностью от 0,5 до 5,0 т и кошки с ручным приводом грузоподъемностью от 0,5 до 3,2 т с механизмом передвижения и без него. Настоящий стандарт не распространяется на тали и кошки, предназначенные для эксплуатации в радиоактивных, взрыво- и пожароопасных средах, а также тали и кошки, предназначенные для подъема и перемещения людей, взрывчатых и ядовитых веществ, жидкого и раскаленного металла
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
12/25/1989
SKU: RUSS19055
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
53 Handling equipment »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Documentation »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.5 Lifting and rigging equipment »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.30 Auxiliary equipment for lifting equipment »
National standards »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.30 Auxiliary equipment for lifting equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G86 Lifting equipment »
National Standards for OKSTU »
HEAVY, POWER AND TRANSPORTATION ENGINEERING PRODUCTS »
Carts for hoists (crampons), hoists (except electric), winches »
As a Replacement Of:
GOST 2799-75: Manual gear hoists. Type, basic parameters and dimensions
GOST 47-63: Grapples with a manual drive. Types. Basic parameters and dimensions
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 1033-79: Fatty cup grease. Specifications
GOST 10354-82: Polyethylene film Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.4.128-83: Safety helmets
GOST 1412-85: Flakish graphite cast iron
GOST 14192-96: Cargo marking
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions
GOST 2.601-95: Operational documents
GOST 20799-88: Industrial oils Specifications
GOST 21150-87: Litol-24 grease
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 25835-83: Lifting capacity cranes. Duty classifications of mechanisms
GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 4543-71: Structural alloyed steel
GOST 8239-89: Steel hot-rolled I-beams
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 977-88: Steel castings. General specifications
GOST 9825-73: Paint materials. Terms, definitions and designations
The Document is Referenced By:
POT R M-012-2000: Industry-Wide Occupational Safety and Health Requirements for Work at Heights
TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.