SNiP 41-02-2003
СНиП 41-02-2003
|
|
Heat networks
Тепловые сети
Status: The document is not up to date. The current version of SP 124.13330.2012 is valid. Heating networks
The rules and regulations apply to heat networks (with all associated structures) from output gate valves (excluding them) to a heat source collectors or from external walls of a heat source to output gate valves (including them) to heat points (input nodes) of buildings and structures transporting hot water with temperature up to 200 ° С and pressure up to 2.5 MPa inclusive; water vapor with temperature up to 440 ° С and pressure up to 6.3 MPa inclusive; steam condensate. The structure of heat networks includes buildings and structures of heat networks: pumping, heat points, pavilions, chambers, drainage devices, etc. The standards consider centralized heat supply systems in terms of their interaction in a single technological process of production, distribution, transportation and consumption of heat. Norms and rules should be observed in the design of new and reconstruction, modernization and technical re-equipment of existing heating networks (including facilities on heat networks).
Нормы и правила распространяются на тепловые сети (со всеми сопутствующими конструкциями) от выходных запорных задвижек (исключая их) коллекторов источника теплоты или от наружных стен источника теплоты до выходных запорных задвижек (включая их) тепловых пунктов (узлов вводов) зданий и сооружений, транспортирующие горячую воду с температурой до 200 °С и давлением до 2,5 МПа включительно, водяной пар с температурой до 440 °С и давлением до 6,3 МПа включительно, конденсат водяного пара. В состав тепловых сетей включены здания и сооружения тепловых сетей: насосные, тепловые пункты, павильоны, камеры, дренажные устройства и т.п. В нормах рассматриваются системы централизованного теплоснабжения в части их взаимодействия в едином технологическом процессе производства, распределения, транспортирования и потребления теплоты. Нормы и правила следует соблюдать при проектировании новых и реконструкции, модернизации и техническом перевооружении существующих тепловых сетей (включая сооружения на тепловых сетях).
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
6/24/2003
SKU: RUSS19098
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
k.41 Heat supply, heating, ventilation and air conditioning »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.1 For energy »
3.1.2 For thermal power »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.025 Outdoor plumbing systems »
The Document References:
GOST 23120-78: Steel flights of steps, stair landings and railings. Specifications
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications
GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.
GOST 9720-76: Construction and rolling stock clearance diagrams for USSR railway gauge 750 mm
NPB 105-03: Determination of categories of rooms, buildings and external installations on explosion and fire hazard
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
RD 10-400-01: Standards for Strength Analysis of Piping of Piped Heat Distribution Systems
RD 153-34.0-20.518-2003: Standard instructions on protection of heat supply system pipelines against external corrosion
SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control
SNiP 2.02.04-88: Bases and foundations on the permafrost soils
SNiP 41-03-2003: Designing of thermal insulation of equipment and pipelines
The Document is Referenced By:
ATR 313.TS-014.000: Typical solutions for laying pipelines of heat networks in foam-polymer-mineral (PPM) insulation. Diameter DN 50 - 400 mm. Constructions and parts
GOST R 51617-2014: Services of housing maintenance, public utilities and administration of apartment buildings. Public utilities services. General requirements
GOST R 54865-2011: Heat supply of buildings. Method for calculation of energy requirements and efficiencies for of heat generation with heat pump systems
GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST R 55596-2013: District heating systems. Standard for the stress and seismic analysis
GOST R 56380-2015: Water supply networks of pre-insulated pipes. Distant control of quality
GOST R 70346-2022: "Green" standards. Multifamily residential "green" buildings. Evaluation methodology and criteria for design, construction and operation
GOST R 70389-2022: Heat supply schemes of cities. Development and updating processes. Technical conditions for procurement
GOST R 70406-2022: Outdoor engineering networks. Installation and testing of external hot pipelines made of flexible nonmetallic pipes. Rules and control of work performance
GOST R 70517-2022: Hydrometallurgical plants of uranium mining enterprises. Norms of technological design
GOST R 71179-2023: Heat supply systems. Requirements for graphical representation of the main structural elements and technological links between them
GOST R 8.642-2008: State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles
KE-MR 01-2005: Guidelines for the development of optimal operating conditions for the operation of water heating systems for municipal heat supply for an unheated period
MDK 2-04.2004: Methodological manual for the maintenance and repair of housing
MDS 11-21.2009: Method of determination of exact location and depth, as well as ruptures of underground utilities (power, signal cables, pipelines, gas, water, etc.) to prevent their damage during excavation
MDS 31-10.2004: Recommendations on the planning and maintenance of buildings, structures and complexes for funeral purposes
MDS 31-13.2007: Design guidelines for the safety and comfort of industrial buildings
MGSN 4.06-03: Educational institutions. Moscow
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MR 23-345-2008 UR: Guidelines for the design of thermal protection of residential and public buildings
MRR 3.2.69.02-12: The collection of basic prices for design work for the construction of the metro in the city of Moscow, carried out with the involvement of the budget of the city of Moscow
MRR 3.2.69-09: Collection of basic prices for design work for the construction of the metro in the city of Moscow
NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry
NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
RD 03-29-93: Instructional Guidelines For Engineering Certification of Steam and Hot-Water Boilers, Pressure Vessels, Steam and Hot-Water Pipelines
RD 12-VEP: Methods of conducting technical audits of existing centralized heat supply systems (RC audit of the Center)
RD 153-34.0-20.673-2005: Guidelines for the technical diagnosis of pipelines of heat networks using the acoustic method
RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (
RD 7-VEP: Calculation of district heating systems with the requirements of reliability
RD-APK 1.10.07.06-08: Guidelines for the technological design of veterinary and sanitary utilization plants
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 1062-PP: Energy efficiency of residential and public buildings. Standards for energy consumption and thermal protection
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 30-23-2014 Sankt-Peterburg: Guidance on the design of engineering preparation of the territory, engineering networks and improvement of residential and public business neighborhoods
RMD 31-07-2009 Sankt-Peterburg: Guidelines for the design of preschool educational institutions in St. Petersburg
RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
SNiP 32-02-2003: Subways
SNiP 41-03-2003: Designing of thermal insulation of equipment and pipelines
SP 120.13330.2011: Subways
SP 120.13330.2012: Subway systems
SP 124.13330.2012: Heating networks
SP 30.13330.2012: Domestic water supply and sewerage of buildings.
SP 32-105-2004: Subways
SP 41-106-2004: Design and erection of underground hot water supply and heat supply pipelines made of asbestos cement pipes
SP 41-106-2006: Design and installation of underground pipeline systems for hot water supply and heating made of pressurized of asbestos-cement pipes and couplings. To replace SP 41-106-2004
SP 41-107-2004: Design and installation of underground hot water networks made of pipes PE-C (XLPE) with thermal insulation made of polyurethane foam in polyethylene sheath
SP 42.13330.2011: Urban development. Urban and rural planning and development
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
SP 62.13330.2011: Gas distribution systems
SP 92.13330.2012: Warehouses of dry mineral hestilizers and chamical means of protection plants
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
STO 1.1.1.01.0678-2015: Basic rules for ensuring the operation of nuclear power plants
STO ROSTEHEKSPERTIZA 10.001-2009: Thermal networks. Norms and methods of strength calculation
TR 160-04: Technical Recommendations for the design and channelless installation of intra-block pipelines for hot water supply and heat supply from glass-basalt-plastic pipes and products
TSN 23-310-2016 BelO: Energy efficiency in residential and public buildings. Design and control standards
TSN 23-349-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Samara Region
TSN 23-350-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Vologodskaya Oblast
TSN 30-305-2002: Urban planning. Reconstruction and development of non-central areas of St. Petersburg
TSN 30-311-2004: Urban planning. Planning and development of urban and rural settlements of the Yamalo-Nenets Autonomous Okrug
TSN 31-330-2005: Treatment and prevention institutions in St. Petersburg
TSN 41-306-2003: Thermal Insulation of Pipelines for Various Purposes. City of Moscow
TSN 41-307-2003: Design and Construction of Piped Heat Distribution Networks with Individual Foam Polyurethane Thermal Insulation. City of Moscow
TSN 41-311-2004 MO: Autonomous heat sources
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
