GOST 10922-90
ГОСТ 10922-90
|
|
Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
Арматурные и закладные изделия сварные, соединения сварные арматуры и закладных изделий железобетонных конструкций. Общие технические условия
Status: Not effective - Superseded. IUS 2-2014
The standard applies to welded reinforcement and embedded products of reinforced concrete structures and welded joints of reinforcement and embedded products performed in the manufacture and installation of prefabricated and the construction of monolithic reinforced concrete structures. The standard establishes requirements for reinforcement products made from bar reinforced steel and reinforcing wire with a diameter of 3 mm and more. The standard does not apply to embedded products. Not having anchor rods of reinforcing steel.
Стандарт распространяется на сварные арматурные и закладные изделия железобетонных конструкций и сварные соединения арматуры и закладных изделий, выполняемые при изготовлении и монтаже сборных и возведении монолитных железобетонных конструкций. Стандарт устанавливает требования к арматурным изделиям из стержневой арматурной стали и арматурной проволоки диаметром 3 мм и более. Стандарт не распространяется на закладные изделия. Не имеющие анкерных стержней из арматурной стали.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Council of Ministers of the USSR for Construction,
5/18/1990
SKU: RUSS19106
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Fluxes »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.190 Fittings for buildings »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.190 Fittings for buildings »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh33 Stone, brick, concrete and reinforced concrete structures and parts »
The Document is Replaced With:
GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
As a Replacement Of:
GOST 10922-75: Reinforcement products and embedded parts, welded for reinforced concrete structures. Requirements and test methods
The Document References:
GOST 10884-81: Heat strengthened steel bars of periodical section for concrete reinforcement. Technical requirements
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 12004-81: Reinforcing-bar steel. Tensile test methods
GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 166-89: Vernier callipers. Specifications
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications
GOST 23838-89: Buildings of enterprises. Parameters
GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements
GOST 25706-83: Magnifiers
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5530-2004: Packing and technical fabrics made of bast fibres. General specifications
GOST 5530-81: Flax-jute-kenaf for packing and technical designation fabrics. Specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 7502-89: Measuring metal tapes. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8478-81: Welded meshes for reinforced concrete structures. Specifications
GOST 8828-89: Base paper and two-layer waterproof packaging paper
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
SNiP 3.03.01-87: Bearing and enclosing structures
The Document is Referenced By:
GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications
GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 12767-94: Reinforced concrete solid slabs for floors in lange-panel buildings. General specifications
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13578-68: Lightweight concrete panels on porous aggregates for external walls of industrial buildings. Technical requirements
GOST 13580-85: Reinforced concrete slabs for strip foundations. Specifications
GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 17079-88: Reinforced concrete blocks for ventilation. Specifications
GOST 17538-82: Reinforced concrete constructions and products for lift shafts of residential buildings. Specifications
GOST 17608-91: Footway concrete slabs. Specifications
GOST 18048-80: Reinforced concrete sanitary cabins. Specifications
GOST 18979-90: Reinforced concrete columns for multi-storey buildings. Specifications
GOST 18980-90: Reinforced concrete collar beams for multi-storey buildings. Specifications
GOST 19222-84: Arbolit and its products. General specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19570-74: Autoclave cellular concrete panels for internal walls, partitions and floors of house and civil buildings. Technical requirements
GOST 19804.5-83: Reinforced concrete round hole piles and pile-shells. Structure and dimensions
GOST 19804.6-83: Reinforced-concrete round hole built-up piles and tubular piles. Structure and dimensions
GOST 19804.7-83: Two-console reinforced concrete pile-pillars for agricultural buildings. Construction and dimensions
GOST 19804-2012: Reinforced prefabricated concrete piles. Specifications
GOST 19804-91: Reinforced concrete piles. Specifications
GOST 20213-89: Reinforced concrete roof trusses. Specifications
GOST 20372-90: Reinforced concrete rafter and longitudinal beams. Specifications
GOST 21506-2013: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications
GOST 21506-87: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications
GOST 21924.0-84: Reinforced-Concrete Slabs for Urban Road Pavements. Specifications
GOST 23279-2012: Welded reinforcing meshes for reinforced concrete structures and products. General specifications.
GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications
GOST 24476-80: Precast reinforced concrete foundations for columns of the framework of different kinds of application for skeletal multi-storey buildings. Specifications
GOST 24547-81: Reinforced concrete culvert sections under highway and railway embankments. Specifications
GOST 24587-81: Reinforced concrete flumes-water outlets of irrigation systems. Specifications
GOST 24594-81: Wall panels and blocks of brick and ceramic stones. General specifications
GOST 24694-81: Reinforced concrete T-joint of flumed irrigation systems. Specifications
GOST 25628-90: Reinforced concrete columns for single-storey industrial buildings. Specifications
GOST 25697-83: Reinforced concrete slabs for balconies and loggias. General specifications
GOST 25912.0-91: Reinforced concrete slabs for aerodrome pavement
GOST 26815-86: Constructions of support walls reinforced concrete. Specification
GOST 26919-86: Reinforced concrete window boards for residential, civil and auxiliary buildings. Specification
GOST 26992-86: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications
GOST 27108-86: Reinforced concrete framework structures for multi-storeyed industrial buildings with floors without beams. Specifications
GOST 27215-2013: Reinforced concrete ribbed floor slabs of 400 mm depth for industrial buildings. Specifications
GOST 27215-87: Reinforced concrete ribbed floor slabs of 400 mm depth for industrial buildings. Specifications
GOST 28042-2013: Reinforced concrete roofing slabs for industrial buildings. Specifications
GOST 28042-89: Reinforced concrete roofing for enterprises buildings. Specifications
GOST 28737-90: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications
GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications
GOST 32415-2013: Pressure thermoplastic pipes and their fittings for water supply and heating systems. General specifications
GOST 32499-2013: Reinforced concrete multihollow slabs for floors in buildings for span to 9 m stand moulding. Specifications
GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements
GOST 32948-2014: Automobile roads of general use. Supports of road signs. Technical requirements
GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods
GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications
GOST 32956-2014: Public roads. Trays for road drainage. Methods of control
GOST 33128-2014: Automobile roads of general use. Road restraint systems. Technical requirements
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST 6482-88: Reinforced concrete non-pressure pipes
GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications
GOST 6785-80: Reinforced concrete window boards. Specifications
GOST 6786-80: Reinforced concrete parapet slabs for production buildings. Specifications
GOST 6927-74: Slabs of concrete for wall facing. Technical requirements
GOST 8020-90: Concrete and reinforced concrete structures for sewage, water and gas supply pipeline manholes. Technical specifications.
GOST 8478-81: Welded meshes for reinforced concrete structures. Specifications
GOST 8484-82: Reinforced concrete window stools for production buildings. Design and dimensions
GOST 8717.0-84: Reinforced concrete and concrete steps. Specifications
GOST 948-84: Reinforced concrete lintels for brick wall buildings. Specifications
GOST 9561-91: Reinforced concrete multihollow panels for floors in buildings. Specifications
GOST 9818-85: Reinforced concrete flights of steps and stair landings. Specification
GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications
GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MGSN 2.07-01: Inspection and monitoring during the construction and reconstruction of buildings and underground structures
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
MDS 53-2.2004: Diagnostics of welded steel structures
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
ODM 218.4.003-2009: Recommendations for joining metal beams with a monolithic slab by means of continuous comb stops in steel concrete bridges
OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments
OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications
OST 35-26.0-86: Ceramsite concrete room units for transport construction. General technical requirements.
OST 35-27.0-85: Reinforced concrete links of round and rectangular culverts under the railways and roads. Design and dimensions.
OST 66-14-86: Ferroconcrete complex plates. Specification.
R 8-76/NIIZhB: Recommendations for ultrasonic testing of reinforcement welds of reinforced concrete structures
RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities
RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
RD EO 1.1.2.05.0697-2006: Guide to the construction and commissioning of reinforced concrete tower cooling towers of nuclear power plants
RD-15.01.07: Collection of prices for the main types of work carried out during the scientific and technical support of construction
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
RMD 52-12-2012 Sankt-Peterburg: Typical temporary concrete fences during work on the city’s road network
RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SN 313-65: Instructions for manufacturing technology and installation of steel embedded parts in precast concrete and concrete products
SN 393-78: Instructions for welding of reinforcement joints and embedded parts of reinforced concrete structures
SN 525-80: Process Guidelines for Making Polymer Concretes and Polymer Concrete Products
SN 529-80: Process Guidelines for Production of Structures and Products of Dense Silicate Concrete
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SP 120.13330.2012: Subway systems
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
SP 32-105-2004: Subways
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 46.13330.2012: Bridges and pipes
SP 52-104-2006: Steel fibre reineorced concrete structures
SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
ST RK 1855-2008: Bridgeworks and culverts on motor roads. Concrete drive piles for bridge piers. General specification
ST RK 1858-2008: Bridgeworks and culverts on motor roads. Requirements at designing of concrete and reinforced concrete structures
STA 25.03.02-2004: Combined security system
Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement
TR 141-03: Technical recommendations on the construction technology of collector tunnels without secondary lining
TR 162-04: Technical recommendations on the use of reinforced concrete pipes with an inner plastic sheath
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow
TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings
TR 94.03.1-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 94.03.1: Installation of Precast Concrete and Reinforced Concrete Structures for Sub-Grade P
TR 94.03.2-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 03.2: Construction of Super-Structures Made from Precast Reinforced Concrete Elements
TR 95.14-01: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 14: Standard Procedure for Foundation Construction
TU 102-161-77: Coatings weighting reinforced concrete monolithic main pipelines such as PZHU
TU 102-264-81: Weighted reinforced concrete modular ring. UTK type for main pipelines
TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-421-86: Concrete wading weights type 1 UBKM
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-465-88: Rack reinforced concrete vibrated CB 90-3.2 for supports VL 6 - 10 kV
TU 102-46-75: Weights prefabricated cantilever type UKS
TU 102-541-89: Garage assembly individual use of ash and slag concrete
TU 102-738-95: Weighted reinforced concrete marsh wedge with a diameter of 530, 426, 525 with low steel reinforcement consumption (1 UBKm, 2 UBKm)
TU 102-79: Concrete belt weighting compounds type UE for main pipelines
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 5831-001-54735376-2004: Specifications. Three-layer reinforced concrete panels with flexible fiberglass connections for exterior walls of Styrod system buildings
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions
TU 67-1003-88: Lattice arched beams prestressed with a span of 12 m
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSN 67-129-77: Instructions for use of pile foundations from composite piles (for the conditions of Kuzbass)
VSN 81-80: Instructions for the manufacture, construction and filling of precast concrete and reinforced concrete culverts
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.