imgalt

GOST 8.315-97

ГОСТ 8.315-97

Standard samples for composition and properties of substances and materials

Стандартные образцы состава и свойств веществ и материалов

Status: Partially canceled in the Russian Federation. Registration information 1082-st dated 12/13/2011 (official website of Rosstandart); IUS 4-2013

The standard applies to standard samples of the composition and properties of substances and materials and establishes general requirements for the procedure for their development, approval (recognition), registration, release and use.

Стандарт распространяется на стандартные образцы состава и свойств веществ и материалов и устанавливает общие требования к порядку их разработки, утверждения (признания), регистрации, выпуска и применения.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of Russia, 11/10/1997

SKU: RUSS19176

Price: $478.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 71 Chemical industry »

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 2 Technical basics of metrological support » 2.1 Reference materials and standard reference data »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.040 Analytical Chemistry » 71.040.30 Chemical reagents »

National standards » 71 CHEMICAL INDUSTRY » 71.040 Analytical Chemistry » 71.040.30 Chemical reagents »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T82 Metrological rules, norms, regulations and requirements of system of standard samples »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T80 Rules, norms, regulations infield of ensuring uniformity of measurements »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » State system for ensuring the uniformity of measurements (GSI) »


The Document is Replaced With:

GOST 8.315-2019: State system for ensuring the uniformity of measurements. Standard samples of the composition and properties of substances and materials. Key Points

As a Replacement Of:

GOST 8.315-91: State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use

The Document References:

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15895-77: Statistical quality control. Terms and definitions

GOST 8.010-90: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST 8.315-91: State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 8.532-2002: State system for ensuring the uniformity of measurements. Certified reference materials of composition of substances and materials. Interlaboratory metrological certification. Content and order of works

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 50779.10-2000: Statistical methods. Probability and general statistical terms. Terms and definitions

GOST R 50779.11-2000: Statistical methods. Statistical quality control. Terms and definitions

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

PMG 16-96: Regulation on interstate standard specimen

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

The Document is Referenced By:

FR 1.31.2008.01728: Quantitative chemical analysis methods. Atmospheric air, air of residential and public buildings. Methodology for measuring the mass concentration of heavy metals and toxic elements (Cd, Pb, Cu, Zn, Bi, Tl, Ag, Fe, Se, Co, Ni, As, Sb, Hg, Mn) in atmospheric air, air of residential and public buildings inversion voltammetry method

GOST 10689-75: Soda ash from nepheline raw stock for industrial use. Specifications

GOST 12.0.005-2014: System of labor safety standards Metrological support in the field of occupational safety. The main provisions

GOST 1293.0-2006: Lead-antimony alloys. General requirements for methods of chemical analysis

GOST 13047.6-2002: Nickel. Cobalt. Methods for determination of carbon

GOST 13047.6-2014: Nickel. Cobalt. Method for determination of carbon

GOST 13047.7-2002: Nickel. Cobalt. Methods for determination of sulphur

GOST 13047.7-2014: Nickel. Cobalt. Methods for determination of sulphur

GOST 13348-74: Antimonous antimonides. Method of spectral analysis

GOST 13938.13-93: Copper. Methods of determination of oxygen

GOST 1429.14-2004: Tin-lead solders. Methods of atomic-emission spectral analysis

GOST 14657.0-96: Bauxite. General requirements for methods of chemical analysis

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 15027.4-77: Non-tin bronze. Methods for the determination of manganese

GOST 15027.5-77: Non-tin bronze. Methods for the determination of nickel

GOST 15483.10-2004: Tin. Methods of atomic-emission spectral analysis

GOST 16273.0-85: Technical selenium. General requirements for method of spectral analysis

GOST 16412.9-91: Iron powder. Method of photoelectric spectral analysis of silicon, manganese and phosphorus

GOST 1652.10-77: Copper-zinc alloys. Methods for the determination of aluminium

GOST 1652.11-77: Copper-zinc alloys. Methods for the determination of nickel

GOST 1652.12-77: Copper-zinc alloys. Methods for the determination of silicon

GOST 1652.13-77: Copper-zinc alloys. Methods for the determination of phosphorus

GOST 1652.1-77: Copper-zinc alloys. Methods for the determination of copper

GOST 1652.2-77: Copper-zinc alloys. Methods for the determination of lead

GOST 1652.3-77: Copper-zinc alloys. Methods for the determination of iron

GOST 1652.4-77: Copper-zinc alloys. Methods for the determination of manganese

GOST 1652.5-77: Copper-zinc alloys. Methods for the determination of tin

GOST 1652.6-77: Copper-zinc alloys. Methods for the determination of antimony

GOST 1652.7-77: Copper-zinc alloys. Methods for the determination of bismuth

GOST 1652.8-77: Copper-zinc alloys. Methods for the determination of arsenic

GOST 1652.9-77: Copper-zinc alloys. Methods for the determination of sulphur

GOST 17.0.0.02-79: Nature protection. Metrological assurance of the control over the contamination of the atmosphere, surface waters and soil.

GOST 17261-2008: Zinc. Methods of the atomic emission spectrographic analysis.

GOST 17261-77: Zinc. Spectral method of analysis

GOST 17262.1-78: Cadmium. Method of spectral for the determination of copper, nickel, lead and thallium

GOST 17262.3-78: Cadmium. Method of spectral for the determination of arsenic, antimony and tin

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19347-2014: Copper sulfate. Technical conditions

GOST 1953.10-79: Tin bronze. Methods for the determination of stibium

GOST 1953.11-79: Tin bronze. Methods for the determination of bismuth

GOST 1953.12-79: Tin bronze. Methods for the determination of sulphur

GOST 1953.13-79: Tin bronze. Method for the determination of manganese

GOST 1953.14-79: Tin bronze. Method for the determination of magnesium

GOST 1953.15-79: Tin bronze. Methods for the determination of arsenic

GOST 1953.16-79: Tin bronze. Method for the determination of titanium

GOST 1953.1-79: Tin bronze. Methods for the determination of copper

GOST 1953.2-79: Tin bronze. Methods for the determination of lead

GOST 1953.4-79: Tin bronze. Methods for the determination of phosphorus

GOST 1953.5-79: Tin bronze. Methods for the determination of nickel

GOST 1953.6-79: Tin bronze. Methods for the determination of zinc

GOST 1953.7-79: Tin bronze. Methods for the determination of iron

GOST 1953.8-79: Tin bronze. Methods for the determination of aluminium

GOST 1953.9-79: Tin bronze. Methods for the determination of silicon

GOST 20068.1-79: Tintess bronze. Method of spectral analysis of metal standard specimens with spectrum photographic record

GOST 20068.2-79: Tints bronze. Method of spectral analysis of metal standard specimens with spectrum photo-electric record

GOST 20068.3-79: Tints bronze. Method of spectral analysis of oxide standard specimens with spectrum photographic record

GOST 20300.1-90: Baddeleyite-corundum refractories. General requirements for methods of analysis

GOST 2059-95: Solid mineral fuel. Determination of total sulphur. High temperature combustion method

GOST 20996.0-2014: Selenium technical. General requirements for methods of analysis

GOST 22552.0-2019: Quartz sand, ground sandstone, quartzite and vein quartz for the glass industry. General requirements for analysis methods

GOST 22598-93: Nickel and low nickel base alloys. Method of determination of oxygen

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 22751-77: Neutron generators. Method of fast neutron flux measurement

GOST 23328-95: Zinc alloys. Methods of spectral analysis

GOST 23862.0-79: Rare-earth metals and their oxides. General requirements for methods of analysis

GOST 23862.17-79: Praseodymium and its oxide. Method of determination of rare-earth element oxides

GOST 23862.18-79: Neodymium, gadolinium and their oxides. Method of determination of rare-earth element oxides

GOST 23957.1-2003: Zinc. Atomic-absorption method for determination of lead, cadmium, antimony, iron and copper

GOST 24405-80: Silicate enamels (frits). Specifications

GOST 24975.1-2015: Ethylene and propylene. Chromatographic methods of analysis

GOST 25086-2011: Non-ferrous metals and their alloys. General requirements for methods of analysis

GOST 25086-87: Nonferrous metals and their alloys. General requirements for methods of analysis

GOST 25542.0-93: Alumina. General requirement for methods of chemical analysis

GOST 25599.1-83: Sintered hard metals. Methods for the determination of total carbon

GOST 2642.0-2014: Refractories and refractory raw materials. General requirements for methods of analysis

GOST 26449.0-85: Stationary distillation desalting units. General requirements for chemical analysis methods at saline water desalination

GOST 27225-87: Lead-calcium bearing alloys. Determination of magnesium, copper and aluminium. Atomic absorption method

GOST 27611-88: Cast iron. Photoelectrical special method of analysis

GOST 27678-88: Wood particle boards. Perforator method for determining formaldehyde content

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 28052-97: Titanium and titanium alloys. Methods of oxygen determination

GOST 28654-90: Abrasive grains from aluminium oxide. Test methods of chemical composition

GOST 30082-93: Zinc-aluminium alloys. Spectral method of analysis

GOST 30256-94: Building materials and products. The method of the thermal conductivity determination by a cylindrical probe

GOST 30290-94: Building materials and products. Surface converter method of thermal conductivity determination

GOST 30531-97: Porcelain and glass pin type insulators for voltage level up to 1000 V. General specifications

GOST 30608-98: Tin bronzes. Method of X-ray fluorescent analysis

GOST 30609-98: Brass castings. Method of X-ray fluorescent analysis

GOST 30764-2002: Industrial cleanliness. Reference materials of granulometric composition of contaminants for liquid technologic media. General technical requirements

GOST 31244-2004: Non-destructive testing. Evaluation of material physical and mechanical properties for technical system elements by acoustic method. General requirements

GOST 31382-2009: Copper. Methods of analysis

GOST 31411-2009: Ammonium perrenat. Specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31653-2012: Feedstuffs. Method of immunoenzyme mycotoxin determination

GOST 31724-2012: Vodkas, special vodkas and water for their production. Determination of cations, amines, anions of non-organic and organic acids content by capillary electrophoresis method

GOST 31870-2012: Drinking water. Determination of elements content by atomic spectrometry methods

GOST 3221-85: Primary aluminium. Methods of spectral analysis

GOST 32221-2013: Copper concentrates. Methods of analysis

GOST 32362-2013: Inorganic glass and glass-crystalline materials. Determination of chemical composition. General requirements for methods of determining the content of major chemical components

GOST 3240.10-76: Magnesium alloys. Method for determination of lithium

GOST 3240.11-76: Magnesium alloys. Method for determination of potassium

GOST 3240.12-76: Magnesium alloys. Methods for determination of copper

GOST 3240.13-76: Magnesium alloys. Method for determination of sodium

GOST 3240.14-76: Magnesium alloys. Method for determination of neodymium

GOST 3240.15-76: Magnesium alloys. Methods for determination of nickel

GOST 3240.16-76: Magnesium alloys. Methods for determination of sum of rare-earth elements and cerium

GOST 3240.1-76: Magnesium alloys. Methods for determination of aluminium

GOST 3240.18-76: Magnesium alloys. Method for determination of titanium

GOST 3240.20-76: Magnesium alloys. Methods for determination of iron

GOST 3240.21-76: Magnesium alloys. Method for determination of beryllium

GOST 3240.2-76: Magnesium alloys. Methods for determination of manganese

GOST 3240.3-76: Magnesium alloys. Methods for determination of zinc

GOST 3240.4-76: Magnesium alloys. Methods for determination of indium

GOST 3240.5-76: Magnesium alloys. Methods for determination of zirconium

GOST 3240.6-76: Magnesium alloys. Methods for determination of cadmium

GOST 3240.7-76: Magnesium alloys. Method for determination of calcium

GOST 3240.8-76: Magnesium alloys. Methods for determination of silicon

GOST 3240.9-76: Magnesium alloys. Methods for determination of lanthanum

GOST 32517.1-2013: Iron ores, concentrates, agglomerates and pellets. Methods for the determination of total iron

GOST 32518.1-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica gravimetric method

GOST 32518.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method

GOST 32520-2013: Iron ores, concentrates, agglomerates and pellets. General requirements to the methods of chemical analyses

GOST 32599.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of sulfur content. Combustion/titration c method

GOST 32841-2014: Juice products. Determination of ethanol in aromatic compounds using gas chromatography

GOST 32919-2014: Juice products. Determination of trace quantities of methanol

GOST 32985-2014: Solid biofuels. Determination of carbon, hydrogen and nitrogen by instrumental methods

GOST 33210-2014: Copper-containing ore and polymetallic ores and derived products. Methods of measurement of the mass fraction of sulfur

GOST 33276-2015: Juice products. Methods for determination of relative density

GOST 33332-2015: Fruit and vegetable products. Determination of sorbic and benzoic acids by high performance liquid chromatography

GOST 33437-2015: Juice products. Determination of chlorides by potentiometric titration method

GOST 33462-2015: Juice products. Determination of sodium, potassium, calcium and magnesium by atomic absorption spectrometry method

GOST 33654-2015: Brown coals, hard coals and anthracites. General requirements for methods of analysis

GOST 33681-2015: Food products. Determination of antibiotics by stripping voltammetry method (chloramphenicol, tetracycline)

GOST 33824-2016: Food-stuffs and food raw materials. The inversion-voltammetry method for determining the content of toxic elements (cadmium, lead, copper and zinc)

GOST 33850-2016: Soils. Determination of the chemical composition by X-ray fluorescence spectrometry

GOST 33936-2016: Gas supply system. Trunk pipeline transportation of gas. Environment protection. Water protection. Water conditioning. Inspection

GOST 34708-2021: Pipe fittings. Sealing materials based on thermally expanded graphite. General specifications

GOST 34837-2022: Adapted milk mixtures for baby food. Determination of potassium, sodium, calcium, magnesium and manganese by atomic absorption spectrometry

GOST 444-2016: Flotation sulphur pyrite. Specifications

GOST 5382-2019: Cements and materials of cement production. Chemical analysis methods

GOST 5382-91: Cements and materials for cement production. Chemical analysis methods

GOST 6012-2011: Nickel. Methods of the chemical and atomic emission spectrographic analysis.

GOST 6012-98: Nickel. Methods of chemical-atomic-emission spectral analysis

GOST 6674.1-74: Alloy copper-phosphorus. Methods for the determination of phosphorus content

GOST 6689.10-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of carbon

GOST 6689.12-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of magnesium

GOST 6689.13-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of arsenic

GOST 6689.15-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of antimony

GOST 6689.16-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of zinc, cadmium, lead, bismuth and tin

GOST 6689.17-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of bismuth

GOST 6689.1-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of copper

GOST 6689.19-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of phosphorus

GOST 6689.20-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of lead

GOST 6689.21-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of titanium

GOST 6689.22-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of tin

GOST 6689.2-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of nickel

GOST 6689.3-92: Nickel, nickel and copper-nickel alloys. Method for the determination of nickel and cobalt sum

GOST 6689.4-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of zinc

GOST 6689.5-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of iron

GOST 6689.6-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of manganese

GOST 6689.7-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of silicon

GOST 6689.8-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of aluminium

GOST 6689.9-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of cobalt

GOST 6912.2-93: Alumina. X-rays difractial method for the determination of alfa-oxide-aluminium

GOST 7328-2001: Weights. General specifications

GOST 7727-81: Aluminium alloys. Methods of spectral analysis

GOST 8.518-2010: State system for ensuring the uniformity of measurements. Ferritometers for austenitic steels. Verification procedure

GOST 8.531-2002: State system for ensuring the uniformity of measurements. Reference materials of composition of solid and disperse materials. Ways of homogeneity assessment

GOST 8.532-2002: State system for ensuring the uniformity of measurements. Certified reference materials of composition of substances and materials. Interlaboratory metrological certification. Content and order of works

GOST 8.556-91: State system for ensuring the uniformity of measurements. Methods for determination of waters samples composition and properties. General requirements for development

GOST 8.578-2002: State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in gaseous media

GOST 8.578-2008: State system for ensuring the uniformity of measurements. State verification scheme for measuring instruments of the content of components in gaseous media

GOST 8.578-2014: State system for ensuring the traceability of measurements. State hierarchy scheme for measuring instruments of the content of components in gaseous mediums

GOST 8269.1-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works Methods clicmical analysis

GOST 851.11-93: Primary magnesium. Method for determination of tin

GOST 851.12-93: Primary magnesium. Method for determination of lead

GOST 851.13-93: Primary magnesium. Method for determination of zinc

GOST 851.1-93: Primary magnesium. Methods for determination of iron

GOST 851.2-93: Primary magnesium. Methods for determination of silicon

GOST 851.3-93: Primary magnesium. Methods for determination of nickel

GOST 851.4-93: Primary magnesium. Methods for determination of copper

GOST 851.5-93: Primary magnesium. Methods for determination of aluminium

GOST 851.6-93: Primary magnesium. Methods for determination of manganese

GOST 851.8-93: Primary magnesium. Spectral method for determination of sodium and potassium

GOST 851.9-93: Primary magnesium. Methods for determination of titanium

GOST 8756.11-2015: Fruit and vegetable products. Methods for determination of transparency and turbidity

GOST 8776-2010: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 8776-99: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 9519.0-82: Lead-calcium bearing alloys. General requirements for methods of spectral analysis

GOST 9519.1-77: Lead-calcium bearing alloys. Method of spectral analysis on cast metallic standard specimens

GOST 9716.2-79: Copper-zinc alloys. Method spectral analysis of metal standard specimens with photoelectric registration of spectrum

GOST 9816.0-2014: Tellurium technical. General requirements for methods of analysis

GOST 9853.10-96: Sponge titanium. Method for determination of niobium and tantalum

GOST 9853.11-96: Sponge titanium. Method for determination of copper

GOST 9853.12-96: Sponge titanium. Method for determination of zirconium

GOST 9853.13-96: Sponge titanium. Method for determination of tin

GOST 9853.14-96: Sponge titanium. Method for determination of magnesium

GOST 9853.15-96: Sponge titanium. Method for determination of molybdenum

GOST 9853.16-96: Sponge titanium. Method for determination of tungsten

GOST 9853.17-96: Sponge titanium. Method for determination of palladium

GOST 9853.18-96: Sponge titanium. Method for determination of manganese

GOST 9853.1-96: Sponge titanium. Method for determination of nitrogen

GOST 9853.19-96: Sponge titanium. Method for determination of chrome

GOST 9853.20-96: Sponge titanium. Method for determination of vanadium

GOST 9853.21-96: Sponge titanium. Methods for determination of hydrogen

GOST 9853.22-96: Sponge titanium. Methods for determination of nickel

GOST 9853.2-96: Sponge titanium. Method for determination of iron content

GOST 9853.3-96: Sponge titanium. Methods for determination of carbon

GOST 9853.4-96: Sponge titanium. Methods for determination of chlorine

GOST 9853.5-96: Sponge titanium. Methods for determination of oxygen

GOST 9853.7-96: Sponge titanium. Method for determination of aluminium

GOST 9853.9-96: Sponge titanium. Method for determination of silicon

GOST ISO Guide 31-2019: Standard samples. Contents of certificates, labels and accompanying documentation

GOST R 50683-94: Soils. Determination of mobile compounds of copper and cobalt by Krupsky and Aleksndrova method modified by CINAO

GOST R 50684-94: Soils. Determination of mobile compounds of copper by Peive and Rinkis modified by CINAO

GOST R 50685-94: Soils. Determination of mobile compounds of manganese by Krupsky and Alexandrova method modified by CINAO

GOST R 50686-94: Soils. Determination of mobile compounds of zinc by Krupsky and Alexandrova method modified by CINAO

GOST R 50965-96: Aluminium and aluminium alloys. Method for determination of hydrogen in solid metal

GOST R 51063-97: Inert powder. Methods of testing

GOST R 51232-98: Drinking water. General requirements for organization and quality control methods

GOST R 51309-99: Drinking water. Determination of elements content by atomic spectrometry methods

GOST R 51352-2013: In vitro diagnostic medical devices. Test methods

GOST R 51352-99: Kits of reagents for clinical laboratory diagnostics. Test methods

GOST R 51672-2000: Metrological ensuring of product testing for the assurance of conformity. General principles

GOST R 51680-2000: Drinking water. Method for determination of cyanide content

GOST R 51712-2001: Indicator tubes. General specifications

GOST R 51755-2001: Silicate enamels (frits). Methods of analysis

GOST R 51768-2001: Resources saving. Waste treatment. Methods for determination of mercury in mercury containing waste. General requirements

GOST R 51823-2001: Alcoholic products and raw material for its production. Inversion-voltammetric method for determination of cadmium, lead, zinc, copper, arsenic, mercury, iron and total sulphur dioxide content

GOST R 51839.2-2001: Protective technologies. Means of protection. Verification symbol. General technical requirements

GOST R 51839.3-2001: Protective technologies. Means of protection. Anticopy protection. General technical requirements

GOST R 51839.4-2001: Protective technologies. Means of protection. Special document coding. General technical requirements

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52105-2003: Resources saving. Waste treatment. Classification and treatment methods of the mercury containing waste. Basic principles

GOST R 52118-2003: Reference materials of nuclear materials for radiation monitors. General technical requirements and testing methods

GOST R 52180-2003: Drinking water. Determination of elements content by stripping voltammetric method

GOST R 52181-2003: Drinking water. Determination of anions content by ion chromatography and capillary electrophoresis methods

GOST R 52278-2004: Monorail transport system rolling stock. Carrying out the repair. General specifications

GOST R 52371-2005: Tin and lead babbits. Method of inductively coupled plasma atomic-emission spectrometry

GOST R 52407-2005: Drinking water. Methods of hardness determination

GOST R 52471-2005: Feedstuffs. Immunoenzyme method of mycotoxin determination

GOST R 52569-2006: Frits. Specifications

GOST R 52569-2018: Frits. Specifications

GOST R 52599-2006: Precious metals and their alloys. General requirements for methods of analysis

GOST R 52708-2007: Water. Method for determination of chemical oxygen demand

GOST R 52769-2007: Water. Methods for determination of colour

GOST R 52930-2008: Vodkas, special vodkas and water for their production. Determination of cations, amines, anions of non-organic and organic acids content by capillary electrophoresis method

GOST R 52964-2008: Drinking water. Methods for determination of sulphate content

GOST R 52998-2008: Copper concentrate. Specifications

GOST R 53009-2008: Environmental control and monitoring systems. General guidelines on creation, adoption and ensuring functioning of the chemical weapons destruction

GOST R 53198-2008: Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis

GOST R 53403-2009: Iron ores, concentrates, agglomerates and pellets. Method for the determination of titanium content

GOST R 53636-2009: Pulp, paper, board. Terms and definition

GOST R 53657-2009: Iron ores, concentrates, agglomerates and pellets. Method for determination of divalent iron calculated as ferrous oxide

GOST R 53658-2009: Iron ores, concentrates, agglomerates and pellets. Atomic absorption method for determination of copper content

GOST R 53659-2009: Iron ores, concentrates, agglomerates and pellets. Atomic absorption method for determination of total manganese calculated as protoxide

GOST R 54153-2010: Steel. Method of atomic emission spectral analysis

GOST R 54216-2010: Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen by instrumental methods

GOST R 54239-2010: Solid mineral fuels. Selection of methods for the determination of trace elements

GOST R 54239-2018: Solid mineral fuel. Selection of methods for the determination of trace elements

GOST R 55080-2012: Cast iron. Method of X-ray fluorescence (XRF) analysis

GOST R 55253-2012: Air transport. Non-destructive testing of aircraft. Requirements for the application, organization and performance of test

GOST R 55255-2012: Air transport. System of maintenance service and repair of aviation equipment. The organization of works on diagnostics of the technical state. Basic provisions

GOST R 55410-2013: Refractory. Analysis by X-ray fluorescence (XRF)

GOST R 55558-2013: Sulphide copper-nickel ore. Mass-spectrometry method for determination of platinum, palladium, rhodium, ruthenium, iridium and cold content with preliminary collecting for nickel matte

GOST R 55685-2013: Blister copper. Methods of analysis

GOST R 55761-2013: Batches, sugar mash, brew from food raw material. Determination mass concentration of cations, anions of non-organic and organic acids content by capillary electrophoresis

GOST R 55867-2013: Air transport. Metrological support on air transport. General principles

GOST R 56474-2015: Space systems. Non-destructive testing of physics and mechanical properties of space technique's materials and coatings by dynamic indentation. General requirements

GOST R 56475-2015: Space systems. Non-destructive testing of the thickness of thick nickel platings of parts and assemblies of liquid-propellant engines. General requirements

GOST R 56859-2016: Copper and complex ores, and products of their processing. Methods of measurement of gold and silver weight fraction

GOST R 57413-2017: Combustible natural gas. State reference materials on the basisd magistral gas. Specification

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.589-2001: State system for ensuring the uniformity of measurements. Control of nature environment soiling. Metrological ensuring. General principles

GOST R 8.600-2003: State system for ensuring the uniformity of measurements. Procedures of measurement of mass fraction of the parent substance of reagents and super pure substances by titrimetric methods. General requirements

GOST R 8.609-2004: State system for ensuring the uniformity of measurements. Certified reference materials of state accounting and control of nuclear materials system. Basic principles

GOST R 8.609-2018: State system for ensuring uniformity of measurements. Standard samples of the system of state accounting and control of nuclear materials. Main provisions

GOST R 8.613-2005: State system for ensuring the uniformity of measurements. Procedures for quantitative chemical analysis of water samples. General requirements for development

GOST R 8.613-2013: State system for ensuring the uniformity of measurements. The procedures (methods) of measurements of structure and properties of water samples. General requirements to development

GOST R 8.632-2007: State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Main principles

GOST R 8.632-2013: State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Basic principles

GOST R 8.637-2007: State system for ensuring the uniformity of measurements. Certified reference materials for metrological maintenance of pipeline non-destructive testing equipment. General requirements

GOST R 8.690-2009: State system for ensuring the uniformity of measurements. Use of Proficiency Testing by interlaboratory comparisons for Accreditation in Testing

GOST R 8.692-2009: State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons

GOST R 8.694-2010: State system for ensuring the uniformity of measurements. Standard reference materials (substances). General statistical principles of determination of metrological characteristics

GOST R 8.703-2010: State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles

GOST R 8.753-2011: State system for ensuring the uniformity of measurements. Reference materials of materials (substance). Basic principles

GOST R 8.784-2012: State system for ensuring the uniformity of measurements. Measuring installations - standards of 2-nd class of moisture content of firm and loose materials. Verification procedure

GOST R 8.810-2012: State system for ensuring the uniformity of measurements. Reference materials. The programme and procedure for the determination of metrological characteristics

GOST R 8.819-2013: State system for ensuring the uniformity of measurements. State verification schedule for measuring tools for determination component composition of gas condensate

GOST R 8.824-2013: State system for ensuring the uniformity of measurements. General requirements for the competence of reference material producers

GOST R 8.871-2014: State system for ensuring the uniformity of measurements. In house reference materials, reference materials of the branches. The general requirements

GOST R 8.884-2015: State system of assurance of measurement uniformity. Metrological supervision performed by the metrological services of legal entities. General principles

GOST R 8.918-2016: State system ensuring the uniformity of measurements. Reference materials refinery gases. General metrological and technical requirements

GOST R 8.919-2016: State system for ensuring the uniformity of measurements. Reference systems for certification reference materials composition of magistral natural gas and substitute natural gas. The method of verification

GOST R 8.920-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Nitrogen oxide, Nitrogen dioxide, Hydrogen sulfide, Sulfur dioxide, Ammonia. Procedure of determining the metrological characteristics

GOST R 8.921-2016: State system for ensuring the uniformity of measurements. Certified reference materials of natural gas magistral and substitute natural gas. Procedure of determining the metrological characteristics

GOST R 8.925-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Hydrogen, Nitrogen, Oxygen, Carbon Oxide, Carbon Dioxide, Methane, Propane, Hexane. Procedure of determining the metrological characteristics

GOST R 8.926-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with halocarbons. Procedure of determining the metrological characteristics

GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions

GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method

GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values

M 15-2010: Recommendation. General requirements for quantitative chemical analysis

M 15-2019: Recommendation. General requirements for analysis methods

M 24-2012: Recommendation. Certification of methods (methods) of measurements of indicators of the composition and properties of objects of metallurgical production, industrial environmental monitoring, environmental monitoring, chemical factors of the industrial en

M-01V/2011: Method for measuring the mass concentration of metals in emissions of pollutants into the atmosphere and in the air in the working zone of industrial enterprises

MI 1992-98: National Measurement Standards. Universal Analyzers of Composition of Substances and Materials. General Requirements for In-Service Verification Methods

MI 2116-90: Recommendations. GSE. Analysis and evaluation of metrological support in the implementation of ISO 9000 standards

MI 2240-98: National Measurement Standards. Analysis of Measurement, Inspection, and Testing Practicies at Businesses, Organizations, and Associations. Work Execution Technique and Procedures

MI 2334-2002: State system for ensuring uniformity of measurements. Certified mixtures. General development requirements

MI 2335-2003: State system for ensuring uniformity of measurements. Internal quality control of quantitative chemical analysis results

MI 2336-2002: State system for ensuring uniformity of measurements. Indicators of accuracy, accuracy, precision of methods for quantitative chemical analysis. Assessment methods

MI 2348-95: State system for ensuring uniformity of measurements. Analyzer СHN. Method of verification

MI 2388-97: State system for ensuring uniformity of measurements. Installations spectrographic for the analysis of metals. Method of verification

MI 2427-97: Measurements Assessment of Status of Measurements in Test and Measurement Laboratories

MI 2444-97: Recommendation. State system for ensuring uniformity of measurements. Sulfur content in total oil. Measurement technique on an ASOMA 282T X-ray fluorescence analyzer

MI 2471-98: GSE. Bodies of the State Standard Service of composition and properties of substances and materials. General requirements

MI 2500-98: National Measurement Standards. Basic Principles for Metrological Assurance for Small Businesses

MI 2600-2000: Recommendation. State system for ensuring uniformity of measurements. Checking the suitability for use in the laboratory of reagents with expired shelf life according to the results of internal laboratory control of measurement accuracy

MI 2608-2000: State system for ensuring uniformity of measurements. Content and execution of technical documentation for industry standard samples and standard samples of enterprises. General requirements

MI 2639-2001: Recommendation. State system for ensuring uniformity of measurements. State verification schedule for means of measuring the mass fraction of components in substances and materials

MI 2838-2003: Recommendation. GSE. Standard samples of the composition and properties of substances and materials. General requirements for certification programs and methods

MI 2976-2006: Recommendation. State system for ensuring uniformity of measurements. Construction, content and presentation of documents governing the methods of quantitative chemical analysis

MI 3112-2008: Recommendation. State system for ensuring uniformity of measurements. Standard samples of materials (substances). Content and design report

MI 3174-2009: Recommendation. State system for ensuring uniformity of measurements. Establishing the traceability of certified values of reference materials

MI 3176-2009: Recommendation. State system for ensuring uniformity of measurements. Standard samples of the isotopic composition of uranium. Assessment of metrological characteristics

MI 3257-2009: Recommendation. State system for ensuring uniformity of measurements. Standard samples of materials (substances). Comparison method

MI 3269-2010: Recommendation. State system for ensuring uniformity of measurements. Construction, presentation, design and content of documents on methods (methods) of measurement

MI 3300-2010: State system for ensuring uniformity of measurements. Recommendations for the preparation, design and review of materials for testing reference materials for type approval

MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil

MI 668-84: Evaluation of data adequacy on elastic moduli of metals and alloys

MI 858-85: Guidelines. Metrological support of environmental monitoring. Certified mixtures of substances. Main provisions

M-MVI 80-2008: Methods for measuring the mass fraction of elements in soil samples, soils and bottom sediments by atomic emission and atomic absorption spectrometry

MR 18.1.04-2005: Guidelines. The system of quality control of the analysis of environmental samples.

MU 08-47/162: Natural, drinking and treated sewage. Voltammetric method for measuring the mass concentration of mercury

MU 08-47/163: Natural, drinking water, technologically pure, treated waste water. Method for measuring mass concentrations of cadmium, lead, zinc and copper by inversion voltammetry

MU 08-47/167: Fish, seafood, non-fish fishing objects and products produced from them. Voltammetric method for measuring the mass concentration of mercury

MU 08-47/168: Alcoholic and non-alcoholic drinks. Voltammetric method for measuring the mass concentration of mercury

MU 08-47/174: Natural, drinking and treated sewage. Voltammetric method for measuring mass concentrations of manganese, antimony and bismuth

MU 08-47/175: Food products and food raw materials. Inversion voltammetric method for determining the mass concentration of arsenic

MU 08-47/176: Drinking water, natural, technological and treated sewage. Inversion voltammetric method for determining the mass concentration of arsenic

MU 08-47/220: Bioobjects (hair). Inversion voltammetric method for measuring mass concentrations of manganese, antimony and bismuth

MU 08-47/229: Sugar. Inversion voltammetric method for measuring the mass concentration of mercury

MU 31-03/04: Quantitative chemical analysis of samples of natural, drinking and wastewater. Method for measuring mass concentrations of zinc, cadmium, lead and copper by inversion voltammetry on TA analyzers

MU 31-05/04: Quantitative chemical analysis of food samples, food raw materials, dietary supplements. Methodology for measuring mass concentrations of arsenic by inversion voltammetry on TA-type analyzers

MU 31-09/04: Quantitative chemical analysis of drinking, natural and wastewater samples. Methodology for measuring arsenic mass concentration by inversion voltammetry on TA analyzers

MU 31-14/06: Quantitative chemical analysis of samples of natural, drinking, waste water and technological aqueous solutions. Methodology for measuring mass concentrations of nickel and cobalt by inversion voltammetry on TA-type analyzers

MUK 4.1.001-13: Methods of measuring the mass concentration of formaldehyde in samples of drinking, natural, treated wastewater and melted snow (snow) by the photometric method

MUK 4.1.003-13: Measurement of mass concentration of 1, 1-dimethylhydrazine in the blood by spectrophotometric method

MUK 4.1.004-13: Method for measuring the mass concentration of ammonium perchlorate (perchlorate ion) in the urine by the potentiometric method

MUK 4.1.008-13: Method for measuring the mass concentration of dimethylamine in samples of drinking, natural, treated wastewater and snowmelt (snow) by the photometric method

MUK 4.1.011-18: Method for measuring the mass concentration of formaldehyde in samples of drinking, natural, treated wastewater and melt (snow) water by the photometric method

MUK 4.1.012-18: The method of measuring the mass concentration of dimethylamine in samples of drinking, natural, treated wastewater and melt (snow) water by Photometric method

MUK 4.1.015-11: Methods of measuring the mass fraction of tetramethyltetrazene in soil samples by the photometric method

MUK 4.1.016-11: Methods of measuring the mass fraction of nitrosodimethylamine in soil samples by the photometric method

MUK 4.1.019-11: Measurement method of the mass fraction of 1, 1-dimethylhydrazine in soil samples by photometric method

MUK 4.1.2473-09: Control methods. Chemical factors. Measuring mass concentrations of oxide and nitrogen dioxide in air of working zone by reaction with Griss-Ilosvay reagent by photometry method

MUK 4.2.2429-08: Method for the determination of staphylococcal enterotoxins in food

MVI 07-04: Methods for measuring the mass concentration of iron (Fe 3) in industrial emissions by the photometric method

OST 95 10571-2002: Measurement system for the purpose of accounting and control of nuclear materials. Main provisions

PMG 16-2019: Regulation on the Interstate Standard Model

PMG 16-96: Regulation on interstate standard specimen

PMG 26-2019: Register of interstate reference materials for the composition and properties of substances and materials. Key Points

PND F 12.10.1-2000: Guidelines for verifying the quality of chemical reagents used in performing quantitative chemical analysis.

PND F 13.1.31-02: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the mass concentration of chromium hexavalent in industrial emissions of electroplating, metallurgical and chemical production by the photometric method

PND F 13.1.57-07: Methods for measuring mass concentrations of vapor and volatile mercury compounds in atmospheric sources by the photometric method

PND F 14.1:2:4.135-98: Quantitative chemical analysis of water. Methods for measuring the mass concentration of elements in drinking, natural, wastewater and precipitation samples using inductively coupled plasma atomic emission spectrometry

PND F 14.1:2:4.224-06: Methods for measuring mass concentrations of total iodine, iodide ions and iodate ions in mineral, drinking, natural and waste waters using stripping voltammetry on TA analyzers

PND F 14.1:2:4.234-06: Methods for measuring the mass concentration of silver in drinking, natural, mineral, waste and process water solutions using stripping voltammetry using TA analyzers

PND F 14.1:2:4.235-06: Methods for measuring the mass concentration of selenium in drinking, natural, mineral, waste and process water solutions using stripping voltammetry on TA analyzers

PND F 16.1:2.3:3.11-98: Method for performing measurement of metal content in solid objects (soil, composts, cakes, sewage sludge, samples of plant origin) by spectrometry with inductively coupled plasma

PND F 16.1:2:2:2:3.48-06: Quantitative chemical analysis of soil samples, greenhouse soils, silt, sediment, sapropel, solid waste. Methods for measuring mass concentrations of zinc, cadmium, lead, copper, manganese, arsenic, mercury by stripping voltammetry on TA analyzers

PR 32.140-99: Metrological support. Standard samples of industry enterprises. The procedure for the development, certification, approval, registration, control and supervision

PR 50.2.013-97: GSOEI. The procedure for accreditation of the metrological services of legal entities to the right of certification of measurement procedures and metrological examination of documents

PR 50.2.020-96: GSOEI. The procedure for maintaining the state register of approved types of reference materials

R 50.2.005-2000: State system for ensuring uniformity of measurements. Metrological supervision of the production and use of standard samples. Work content during inspections

R 50.2.008-2001: National System for Standardization of Measurements. Techniques for Chemical Quantitative Analysis. Scope and Procedure for Execution of Metrological Expert Review

R 50.2.011-2001: State system for ensuring uniformity of measurements. Verification of accredited testing laboratories of food products and food raw materials for quality testing

R 50.2.011-2005: State system for ensuring uniformity of measurements. Verification of the qualifications of testing (measuring) laboratories performing tests of substances, materials and environmental objects (in composition and physicochemical properties) by means of interlaboratory comparisons

R 50.2.031-2003: National Measurement Standards. Standard Specimens of Composition and Properties of Substances and Materials. Method for Assessment of Stability Characteristics

R 50.2.058-2007: State system for the uniformity of measurements. Uncertainty evaluation of calibrated values of standard samples

R 50.2.061-2008: General criteria for the competence of certified reference material producers

R 50.2.088-2013: State system for ensuring the uniformity of measurements. Quality manual of reference material producers. Basic principles

R 50.2.089-2013: State system for ensuring the uniformity of measurements. The state service of reference material composition and properties substances and materials. Organizing structure, functions and interaction participant

R 50.2.090-2013: State system for ensuring the uniformity of measurements. Quantitative chemical analysis procedures. General requirements for development, certification and application

R 50.4.004-2000: Accreditation of test labs for food products and raw material

R 50.4.006-2002: Interlaboratory comparison tests for the accreditation and conformity surveillance of testing laboratories. Procedure and order of carrying out the work

R 52.14.648-2003: Recommendations. Metrological examination of regulatory and technical documentation

R 52.24.309-2004: Organizing and secure monitoring of surface water pollution on Federal Hydrometereology and Environmental Monitoring Service web

RD 07-08-2007: Guidelines for verifying compliance with the basic rules for accounting and control of radioactive substances and radioactive waste in an organization

RD 153-00.0-006-99: Sectoral system for ensuring the uniformity of measurements in the fuel and energy complex. Metrological control and supervision in the fuel and energy complex

RD 32.144-2000: Acceptance nondestructive testing. Solid wheels, tires and axes of wheel sets for rolling stock. Technical requirements.

RD 34.11.332-97: Procedural Guidelines. Development and Certification of Measurement Methods Used at Electric Power Facilities in Areas Subject to Government Metrological Monitoring and Inspection. Organization and Procedure

RD 50-386-83: Guidelines. Certification of design and survey stations for the chemicalization of agriculture and agrochemical laboratories of the union "Soyuzselkhozkhimiya"

RD 50-647-87: Instructions. Standard samples of the composition of gas mixtures. The procedure for the development and periodic certification

RD 52.10.728-2010: Basic requirements for the competence of laboratories in monitoring the status and pollution of sea water. State Oceanographic Institute (GOIN)

RD 52.10.777-2012: Internal quality control of information on the state and pollution of the marine environment

RD 52.15.880-2019: Guidelines for organizing and conducting observations, assessing the state and pollution of the marine environment in areas of exploration and development of offshore oil and gas fields

RD 52.18.103-2019: Quality control of analytical works on determining the content of pollutants in the soil

RD 52.18.289-90: Guidelines. Methods for measuring the mass fraction of mobile forms of metals (copper, lead, zinc, nickel, cadmium, cobalt, chromium, manganese) in soil samples by atomic absorption analysis. NGO "Typhoon"

RD 52.18.718-2008: Organization and procedure for the observation of soil pollution by toxicants of industrial origin

RD 52.24.309-2011: Organization and conduct of regime monitoring of the state and pollution of surface land waters

RD 52.24.309-2016: Organization and conduct of regime observations of the state and pollution of surface land waters

RD 52.24.508-96: Guidelines. Organization and functioning of the subsystem for monitoring the state of transboundary surface land waters

RD 52.24.509-2005: Internal hydro-chemical information quality control

RD 52.24.509-2015: Internal quality control of hydrochemical information

RD EO 0505-03: Instructions for metal styloscope

RDT 06-2011: General requirements for the competence of laboratories (centers) performing measurements for the purpose of monitoring the environment and its pollution

RMG 103-2010: State system for ensuring the uniformity of measurements. Proficiency testing of test (measurement) laboratories, conducting the tests of substances, materials and environmental objects (for composition and physico-chemical properties) by means of interla

RMG 129-2013: State system for ensuring the uniformity of measurements. Requirements to the specialists in the sphere of ensuring of measurements uniformity, working in the field of legal metrology (experts-metrologists)

RMG 17-2019: The order of planning work on cooperation in the field of creation and application of standard samples of the composition and properties of substances and materials

RMG 27-99: Execution Procedures and Scope of Work for Metrological Conformity Assessment of Process Documentation for Inter-Governmental Standard Specimens

RMG 34-2001: State system for ensuring the uniformity of measurements. Procedure for updating the register of interstate standard samples

RMG 52-2002: State system for ensuring the uniformity of measurements. General methological recommendations for the implementation of GOST 8.315-97 principles in the development and use of reference materials

RMG 54-2002: State system for ensuring the uniformity of measurements. Calibration characteristics of means of measurement of composition and properties of substances and materials. Measurement procedure with the use of reference materials

RMG 55-2003: State system for ensuring the uniformity of measurements. Reference materials for composition of pure organic substances. Methods of certification. Principles basic

RMG 57-2003: State system for ensuring the uniformity of measurements. Samples for monitoring the accuracy of the test results of food products. General provisions

RMG 58-2003: State system for ensuring the uniformity of measurements. Evaluation of the quality of the testing laboratory of food products and food raw materials. The methodology of the external accuracy control of test results

RMG 59-2003: State system for ensuring the uniformity of measurements. Checking of the availability of reagents out of the guaranty storage period for using in laboratory by method of internal laboratory control of test results accuracy

RMG 59-2019: State system for ensuring the uniformity of measurements. Verification of suitability for use in the laboratory of reagents with an expired shelf life by the method of intralaboratory control of measurement accuracy

RMG 61-2003: State system for ensuring the uniformity of measurements. Accuracy, trueness and precision measures of the procedures for quantitative chemical analysis. Methods of determination

RMG 61-2010: State system for ensuring the uniformity of measurements. Indicators of precision and accuracy of the quantitative chemical analysis techniques. Methods for evaluation

RMG 76-2004: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy

RMG 76-2014: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy

RMG 93-2009: State system for ensuring the uniformity of measurements. Estimation of metrological characteristics of reference materials

RMG 93-2015: State system for ensuring the uniformity of measurements. Estimation of metrological characteristics of reference materials

RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

ST RK 1432-2005: Drinking waters packed in containers, including natural mineral water and table drinking water. General specification for drinking packed waters. In substitution of STRK 452-94

ST RK 1496-2006: Sewage water. Determination of chlorides weight concentration with argentometric method

ST RK 1505-2006: Food products. Determination of antibiotics by stripping voltammetry (levometsitin, tetracycline group)

ST RK 1729-2007: Meat and meat products. Acceptance Rules and Test Methods

ST RK 2214-2012: Water Quality. Determination of atomic absorption spectrophotometry micro-element content using a graphite furnace

ST RK 2486-2014: Protection of Nature. drinking water, natural, clean technology, waste, treated waste. Determination of mass concentration of cobalt, tin, and lead by stripping voltammetry

ST RK 2487-2014: Protection of Nature. drinking water, natural, clean technology, waste, treated waste. Determination of mass concentration of potassium, selenium and silver by stripping voltammetry

ST RK 2727-2015: Water quality. Method for the determination of fluoride

ST RK 2730-2015: Water quality. Method for the determination of nitrate ions

ST RK 452-2002: Natural drinking mineral waters, table healing and healing waters. General specification. Put into effect in substitution of ST RK 452-94

ST RK GOST R 51210-2003: Drinking water. Method for determination barium content

ST RK GOST R 51211-2003: Drinking water. Surface active agents content determination method

ST RK GOST R 51212-2003: Methods for determination of total mercury by flameless atomic absorption spectrometry

ST RK GOST R 51232-2003: Water. General requirements for quality control organization and methods

ST RK GOST R 51309-2003: Drinking water. Determination of elements content by atomic spectrometry methods

ST RK GOST R 51310-2003: Drinking water. Method for the determination of benz(a)pyrene content

ST RK ISO 1956-2010: Protection of Nature. Hydrosphere. Determination of aluminum content in drinking, ground and wastewater

STB GOST R 51309-2001: Drinking water. Determination of elements content by atomic spectrometry

STB GOST R 51680-2001: Drinking water. Method for determination of cyanide content

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
United power system and isolated power systems. Operative-dispatch management. Frequency control and control of active power. Norms and requirements
Language: English
Price: $191.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!