Bolts, screws and studs. Mechanical properties and test methods
Болты, винты и шпильки. Механические свойства и методы испытаний
Status: Not effective - Canceled in the Russian Federation. IUS 6-2007
The standard applies to bolts, screws, and studs of carbon unalloyed or alloyed steels with metric threads according to GOST 24705 with a diameter of 1 to 48 mm. The standard does not apply to installation screws and similar fasteners, as well as bolts, screws and studs, which are subject to special requirements, such as weldability, corrosion resistance, performance at temperatures above plus 300 ° C (for automatic steel - plus 250 ° C) and below minus 50 ° C.
Стандарт распространяется на болты, винты, и шпильки из углеродистых нелегированных или легированных сталей с метрической резьбой по ГОСТ 24705 диаметром от 1 до 48 мм. Стандарт не распространяется на установочные винты и аналогичные им крепежные изделия, а также на болты, винты и шпильки, к которым предъявляются специальные требования, такие как свариваемость, коррозионная стойкость, работоспособность при температурах выше плюс 300 °С (для автоматной стали - плюс 250 °С) и ниже минус 50 °С.
Format: Electronic (pdf/doc)
Page Count: 20
Approved: USSR State Committee for Standards,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.10 Bolts, screws, studs »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.10 Bolts, screws, studs »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G3 Fasteners for general engineering applications »
G31 Bolts »
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 11284-75: Through holes for fasteners. Dimensions
GOST 1497-84: Metals. Methods of tension test
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.2-82: Bolts, screws, and studs. Surface imperfections and monitoring methods
GOST 1759-70: Bolts, screws, pins and nuts
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 4543-71: Structural alloyed steel
GOST 5663-79: Carbon steel wire for cold upsetting
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
The Document is Referenced By:
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 10461-81: Shake-proof washers with teeth. General specifications
GOST 11530-2014: Rail joint bolts. Specifications
GOST 11530-93: Rail joint bolts. Specifications
GOST 11648-75: Quick removable thrust washers. Specifications
GOST 12.2.056-81: Occupational safety standards system. Electric and diesel locomotives for 1520 mm gauge. Safety requirements
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 12393-77: Fittings for overhead system of electric railways. General specifications
GOST 12458-67: Screws with bead. Design
GOST 12459-67: Strengthening bolts for machined slots. Design
GOST 12463-67: Pressure screws with star handle. Design
GOST 13152-67: Bolts for machine slots. Design and dimensions
GOST 13932-80: Combined arbor-type circular mills for woodcutting
GOST 1481-84: Hexagon-head dog-point set screws. Product grades A and B. Construction and dimensions
GOST 1482-84: Square-head dog-point set screws. Product grades A and B. Construction and dimensions
GOST 1483-84: Hexagon-head step-point with cone set screws. Product grades A and B. Construction and dimensions
GOST 1485-84: Square-head cup-point set screws. Product grades A and B. Construction and dimensions
GOST 1486-84: Square-head step-point with sphere set screws. Product grades A and B. Construction and dimensions
GOST 1488-84: Square-head collar set screws. Product grades A and B. Construction and dimensions
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 15163-78: Tapered bolts of high precision. Specifications
GOST 15589-70: Bolts with hexagon head, product grade C construction and dimensions
GOST 15590-70: Hexagon reduced head bolts with guide neck product grade C. Construction and dimensions.
GOST 15591-70: Hexagon reduced head bolts, product grade C. Construction and dimensions
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 16016-2014: Clamp bolts for rail track fastenings. Specifications
GOST 16016-79: Bolts and screw-nuts for rail track crossing
GOST 16017-2014: Inserted bolts for rail track fastenings. Specifications
GOST 16017-79: Inserted bolts for rail track fastenings.
GOST 16018-79: Nuts for clamp and inserted bolts of rail track fastenings
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 17769-83: Fastening details. Rules of acceptance
GOST 18123-82: Washers
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 20862-81: Adjusting fixturing hexahedral supports with threaded end and hole. Design and dimensions
GOST 20863-81: Adjusting fixturing rings supports with a flat, threaded end and hole. Design and dimensions
GOST 20864-81: Adjusting fixturing ring supports with slit, threaded end and hole. Design and dimensions
GOST 20865-81: Adjusting fixturing hexahedral supports with threaded holes. Design and dimensions
GOST 20866-81: Adjusting fixturing ring support with flats and threaded holes. Design and dimensions
GOST 20867-81: Adjusting fixturing ring with a slit and threaded holes. Design and dimensions
GOST 21249-96: Blunt bolts for general purpose. Basic parameters and dimensions
GOST 22472-87: Dies for a sheet-metal stamping
GOST 24379.0-2012: Foundation bolts. General specifications
GOST 24379.0-80: Foundation bolts. General specification
GOST 24669-81: Slots for screws and wood screws. Dimensions
GOST 24741-2016: Joint for connection of crane rails to steel crane girders. Specifications
GOST 25556-82: Set screws. Mechanical properties and test methods
GOST 25933-83: Screws with cheese head of smaller diameter for electrical engineering. Construction and dimensions
GOST 26546-85: Chain variators. General specifications
GOST 26957-86: Variator with wide angle belt pulleys. General specifications
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 28456-90: Expansive dowels for building. General specifications
GOST 28778-90: Expansion bolt self-anchoring for building. Specifications
GOST 28962-91: Hexagon socket head shoulder screws. Specifications
GOST 28963-91: Hexagon socket button head screws. Metric series. Specifications
GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design
GOST 30064-93: Spindle noses of drilling, boring and milling machines
GOST 30872-2002: Air cooling machines. General specifications
GOST 30894-2003: Production well head equipment. General technical requirements
GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines
GOST 31.121.42-84: Elements and assemblies of universal built-up and re-adjustable equipment for metal-cutting machines
GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding
GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.
GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties
GOST 32832.1-2014: Mandrels with a longitudinal key and guided cut for Shaft cutters. Part 1. The main dimensions
GOST 32832.2-2014: Mandrels with HSK hollow taper shank for milling Shaft cutters. Part 2. Dimensions and notation
GOST 32832.3-2014: Mandrels with taper 7:24 for Shaft cutters for automatic tool changing. Part 3. Dimensions and notation
GOST 32832.4-2014: Mandrels with taper 7:24 for Shaft cutters for manual tool changing. Part 4. Dimensions and notation
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 6939-93: Marsh and brush-and-bog ploughs. General specifications.
GOST 799-73: Fishplate bolts for broad gauge. General requirements
GOST 9650-80: Pins. Specifications
GOST 9861-88: Four-station cold-formers for timber articles of rod type. Parameters and dimensions norms of accuracy
GOST R 50073-92: Pipelines flange types joint fittings. Specifications
GOST R 50253-92: Rail joint bolts. Specifications
GOST R 50271-92: Prevailing torque type steel hexagon nuts. Mechanical and performance properties
GOST R 50272-92: Prevailing torque type all-metal hexagon nuts. Property classes 5, 8, 10 and 12. Specifications
GOST R 50274-92: Hexagon flange reduced head bolts. Specifications
GOST R 50403-92: Countersunk head screws. Product grades A and B. Specifications
GOST R 50404-92: Slotted pan head screws. Product grades A and B. Specifications
GOST R 50405-92: Slotted cheese head screws. Product grades A and B. Specifications
GOST R 50406-92: Raised countersunk head screws. Product grade A and B. Specifications
GOST R 50790-95: Hexagon head bolts with metric fine pitch thread, product grades A and B. Specifications
GOST R 50791-95: Hexagon head bolts with reduced shank, product grade B (shank diameter approximately equal to pitch diameter). Specifications
GOST R 50792-95: Hexagon head bolts with thread to head, product grade C. Specifications
GOST R 50793-95: Hexagon head bolts with thread to head, product grades A and B. Specifications
GOST R 50794-95: Hexagon head bolts, product grade C. Specifications
GOST R 50795-95: Hexagon head bolts with metric fine pitch thread and thread to head, product grades A and B. Specifications
GOST R 50796-95: Hexagon head bolts, product grades A and B. Specifications
GOST R 51364-99: Air cooling apparatus. General specifications
GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions
GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties
GOST R 53682-2009: Fired heaters for refineries. General technical requirements
GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements
GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods
GOST R ISO 3471-99: Earth-moving machinery. Roll-over protective structures. Performance requirements and laboratory tests
GOST R ISO 8082-99: Machines and tractors for forestry. Roll-over protective structures. Safety requirements and test methods
GOST R ISO 8083-99: Machines and tractors for forestry. Falling-object protective structures. Safety requirements and test methods
I 1.09-10: Instructions for connecting insulated conductors of wires and cables
OST 153-34.0-969-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). General technical requirements
OST 153-34.0-969-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. General technical requirements.
OST 153-34.0-984-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). General technical requirements
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 34-10-504-95: Details and components of TPS pipelines. Flanged connections for disk orifice plates of TPS pipelines for Pnom 2.5 MPa (25 kg/cm2). Construction and dimensions.
OST 34-10-755-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-10-756-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 35-02-72: High-strength bolts, nuts and washers for them.
OST 35-09-86: Hoisting machinery and equipment. General specifications.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants
RD 10-197-98: Guidelines for Operating Condition Assessment of Bolted and Riveted Joints of Hoisting Cranes
RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 153-34.1-39.603-99: Fittings repair manual of high parameters.
RD 24.090.120-07: Design and calculation of transport and technological hoisting cranes for servicing enterprises in the metallurgical industry. Reference guide
RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements
RD 37.001.131-89: Tightening threaded connections. Tightening standards and specifications
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution: Rules for the design and safe operation of steam and hot water boilers
SP 53-101-98: Manufacturing and quality control of steel structures for construction
SP 53-102-2004: General rules for steel structure design
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions
STB 1679-2006: Cultivators for inter-row tillage. General specifications
TR 12220-TI.2001: URSA thermal insulation products in the construction of thermal insulation of industrial equipment. Recommendations for use with technical solutions album
Customers Who Viewed This Item Also Viewed:
Concrete with polysterene aggregates. Specifications
Steel welded vessels and apparatus. General technical conditions
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Billet of rotor shafts and rings of turbine generators
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Seismic building design code
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Noxious substances. Classification and general safety requirements
Safety valves of stream and hot-water boilers. Technical requirements
Steam and hot-water boilers
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Manufacturing and quality control of steel structures for construction
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Buildings and structures foundations
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.