SNiP 2.04.03-85
СНиП 2.04.03-85
|
|
Sewage. External systems and structures
Канализация. Наружные сети и сооружения
Status: Not effective. The updated version of SP 32.13330.2012 Sewerage is in force. Outdoor networks and facilities
Construction norms and rules should be observed in the design of newly built and reconstructed external sewage systems of permanent purpose for settlements and objects of the national economy
Строительные нормы и правила должны соблюдаться при проектировании вновь строящихся и реконструируемых систем наружной канализации постоянного назначения для населенных пунктов и объектов народного хозяйства
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
5/21/1985
SKU: RUSS19190
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
к.40 Water supply and sewerage »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
4. Security of capital construction objects »
4.1. Federal State Construction Supervision »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.3 Water use »
2.3.2 Requirements for use of water bodies for domestic, drinking and public water use »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.030 External sewer systems »
As a Replacement Of:
SNiP II-32-74: Sewage. External networks and facilities
The Document References:
GOST 12.1.011-78: Explosive mixtures. Classification and test methods
GOST 12.2.020-76: Explosion proof electrical apparatus. Terms and definitions. Classification. Marking
GOST 12.3.006-75: Occupational safety standards system. Operation of water supply and sewerage systems. General safety requirements
GOST 25298-82: Compact treatment plants for domestic sewage water. Types, basic parameters and dimensions
GOST 26008-83: cast-iron storm flow receivers for man-holes
Specifications
SN 245-71: Sanitary standards for the design of industrial enterprises
SN 322-74: Guidelines for Execution and Acceptance of Work Related to the Construction by Shield Driving of Collector Tunnels in Urban Areas and at Industrial Facilities
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP II-32-74: Sewage. External networks and facilities
SNiP II-91-77: Industrial Facilities
VSN 63-76: Guidelines for the Analysis of Storm Water Runoff from Small Reservoirs
The Document is Referenced By:
B3-79: Recommendations for the design of water supply and sewage systems of electroplating workshops
GOST 12.3.027-2004: Foundry work. Safety requirements
GOST 32661-2014: Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST R 22.3.19-2022: Security in emergency situations. Temporary stationary accommodation facilities for the population affected in emergency situations. General requirements. Acceptance for use
GOST R 51617-2000: Services living conditions and public utilities. General specifications
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 54475-2011: Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54906-2012: Complex security systems. Environmental security and ecological safety guaranteed design. General technical requirements
GOST R 54964-2012: Conformity assessment. Ecological requirements for estate properties
GOST R 55068-2012: Glass-fibre and basalt-fibre reinforced epoxy plastic pipes and parts of pipelines. Specifications
GOST R 55260.4.1-2013: Hydro power plants. Part 4-1. Hydroelectric power plants. The technological part hydroelectric power plants and pumped storage plants. General specifications
GOST R 70244-2022: Water quality. Requirements for the graphical representation of the main structural elements and technological connections between them for centralized systems of wastewater disposal of settlements and surface runoff
GOST R 70319-2022: "Green" standards. Rainwater harvesting system: treatment, storage, use
GOST R 70517-2022: Hydrometallurgical plants of uranium mining enterprises. Norms of technological design
GOST R 70524-2022: Land reclamation systems and structures. Rules of acceptance into operation
ITP 31-87: Instructions for the technological design of enterprises for the production of perfumery products
Letter 3899-OG/16: Regarding the provisions of SP 32.13330.2018
Letter 48836-DV/08: On current codes of practice that prohibit the use of used pipes
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)
Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)
Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"
Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.03-85: Design of plants with filter presses for dewatering sewage sludge
Manual for SNiP 2.04.03-85: Design of wastewater treatment plants
Manual for SNiP 2.06.15-85: Flood forecasts and calculation of drainage systems in built-up and built-up areas
Manual for SNiP 2.07.01-89: Water and Sewerage Manual for Urban and Rural Settlements
Manual for SNiP 2.07.01-89: Power supply of settlements
Manual for SNiP 2.07.01-89: Heat and gas supply of settlements
Manual for SNiP 2.07.01-89: A guide for the design of urban (local) telephone networks and wired broadcast networks of urban and rural settlements. Dispatching engineering equipment systems
Manual for SNiP 3.01.01-85: A guide for the organization of high-speed construction of roads and airfields using sets of machines of the DS-100 type
Manual for SNiP 3.01.01-85: A guide to the development of projects for the organization of the construction of large industrial complexes using the nodal method
Manual for SNiP 3.01.01-85: A guide for the development of construction organization projects and civil works construction projects
Manual for SNiP 3.01.01-85: Manual on the development of construction projects and agricultural production projects
Manual for SNiP 3.01.01-85: Development of projects for the organization of construction and work projects for the reconstruction of existing enterprises, buildings and structures. Reference manual to SNiP
Manual for SNiP 3.01.01-85: Development of projects for the organization of construction and work projects for industrial construction
MDS 11-21.2009: Method of determination of exact location and depth, as well as ruptures of underground utilities (power, signal cables, pipelines, gas, water, etc.) to prevent their damage during excavation
MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures
MDS 12-36.2007: HL Hutterer & Lechner GmbH (Austria) HL Hoods Roofing Guidelines
MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies
MDS 80-8.2000: Recommended Practice for Development of Technical Part of Bidding Documentation and Bidder Offer
MGSN 1.01-97: Part 1: Interim Urban Development Code of the City of Moscow
MGSN 1.01-98: Part 2: Interim Urban Development Code of the City of Moscow
MGSN 5.02-99: Design of Urban Bridge Structures
MI 2220-13: Recommendation. State system for ensuring uniformity of measurements. Consumption and volume of waste liquid. Measurement technique in free-flow conduits by filling level with preliminary calibration of the measuring section
MU 2.1.5.1183-03: Sanitary and Epidemiological Surveillance over the Water Use in Industrial Water Supply Systems
MU 2.1.5.800-99: Management of state sanitary control for disinfecting sewage waters
NTP 1.30.03.02-06: Norms of technological design of irrigation systems using waste water
NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry
NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry
NTP 17-99*: Norms of technological design of systems for removal and preparation for the use of manure and litter
NTP 24-94: Norms of technological design of hydrogen production by the method of water electrolysis
NTP-APK 1.10.04.001-00: Engineering Design Standards for Horse Raising Facilities
NTP-APK 1.10.04.003-03: Standards for technological design of equestrian complexes
NTP-APK 1.10.06.001-00: Engineering Design Standards for Fur Farms and Rabbit Farms
NTP-APK 1.10.06.002-01: Norms of technological design of enterprises of low power of animal husbandry and rabbit farms
NTP-APK 1.10.09.001-02: Standards for technological design of breeding complexes and reproduction greenhouses
NTP-APK 1.10.13.003-03: Technological design standards for pesticide stores
NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry
NTPD-90: Norms of technological design of diesel power plants
ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials
ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials
ON 016-01124328-2000: Water Consumption and Water Disposal Standards in Industrial Processes in the Industry
ONTP 01-91: All-Union norms for technological design of automobile transport enterprises
ONTP 04-94: Sectoral norms of technological design of enterprises in the automotive industry. Shops of cold sheet metal stamping
ONTP 09-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Mechanical repair shops
ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)
ONTP 14-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises (refinement of ONTP-14-93). Mechanical processing assembly shops
ONTP 444-86: National Engineering Design Standards for Facilities for the Production of Mineral Wool Products and Building Components
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.
OSN-APK 2.10.06.001-04: Instructions for the installation of plastic pipelines at the objects of the agroindustrial complex of Russia
OST 290.004-02: Rules of air division product production design.
OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval
PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations
PB 08-83-95: Requirements for the Organization and Safe Operation of Underground Storage Facilities for Natural Gas in Salt Deposits
PND F SB 14.1.92-96: Methods of sanitary and biological control. Methodological guide to the hydrobiological control of filamentous microorganisms of activated sludge
POT R M-002-97: Intersectoral rules on labor protection in foundry
POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals
POT R M-006-97: Intersectoral labor protection rules for cold metal processing
POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products
POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings
POT R M-025-2002: Intersectoral rules on labor protection during the operation of water supply and sewer facilities
POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars
POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry
POT R O-001-2002: Rules on labor protection for printing organizations
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
POT R O-112-001-95: Rules for labor protection during the operation of oil depots and gas stations
POT R O-13153-TsT-926-02: Industry safety rules for railroad solid fuel bases
POT R O-97300-04-95: Rules for labor protection during storage and processing of fruits and vegetables
POT R O-97300-05-95: Rules for labor protection in food concentrate and vegetable drying industries of the food industry
POT R O-97300-06-95: Rules for labor protection in the sugar industry of the food industry
POT R O-97300-07-95: Rules for labor protection in the production of alcohol and alcoholic beverages
POT R O-97300-08-96: Rules on labor protection in animal husbandry. Pig breeding
POT R O-97300-10-96: Rules on labor protection in animal husbandry. Horse breeding
POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery
POT R O-97300-13-97: Occupational Safety and Health Requirements in Poultry Farming
POT R O-97300-14-97: Rules on labor protection in animal husbandry. Fur farming
PPBO-157-90: Fire Safety Regulations in the Timber Industry
R 52.24.811-2014: Improved system of regime and special observations of the transformation of pollutants along the length of watercourses using mathematical modeling of the processes taking place
RD 12.13.53-86: Guidelines for the design of the organization of the construction of the mine using electronic computers
RD 153-34.1-02.207-00: Recommended Practice for Development of Draft of Standard for Generation and Limits on Placement of Wastes for Piped Heat Supply Network Facilities
RD 153-34.1-02.208-2001: Recommendations for the development of draft standards for waste generation and limits on their placement for TPPs and boilers
RD 153-34.3-02.206-00: Recommended Practice for Development of Drat of Standards for Generation and Limits on Placement of Wastes for Electric Power Grid Facilities
RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.
RD 153-39.4-056-00: Main crude pipeline. Operations rules.
RD 153-39.4-113-01: Standards for technological design of main pipelines
RD 153-39TN-008-96: Guide to Operation, Maintenance, and Repair of Equipment and Facilities of Petroleum Pumping Stations
RD 210.006-90: Rules for the technological design of nuclear power plants (with VVER reactors)
RD 3112199-1069-98: Fire safety requirements for companies operating vehicles on compressed natural gas
RD 34.49.104-91: Recommendations for the design of automatic water extinguishing systems for oil power transformers
RD EO 0356-02-2002: Technical Requirements for the Design of Storage for Packages of Solid and Hardened Radioactive Waste in Reinforced Concrete Protective Non-Returnable Containers of the NZK-150-1.5P Type
RD-APK 1.10.15.02-08: Guidelines for technological design of disposal systems and preparation for the use of manure and litter
RD-APK 3.10.01.05-09: Toolkit for the design of storm sewage structures of livestock enterprises
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 107: Provisional Regulations on the composition of measures to prevent emergencies in the special section "Engineering and technical measures of civil defense. Measures to prevent emergencies" of urban planning documentation of Moscow
Resolution 82: Temporary norms and rules for the planning and development of the city of Moscow. Consolidated edition (not valid)
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 30-23-2014 Sankt-Peterburg: Guidance on the design of engineering preparation of the territory, engineering networks and improvement of residential and public business neighborhoods
RMD 50-06-2009 Sankt-Peterburg: Drainages in the design of buildings and structures
RSN 50-87: Designing residential and public buildings on subsiding soils in the city of Volgodonsk
RSN 68-87: Design of industrial and civil buildings of the West Siberian oil and gas complex
RTP 37-87: Technological design guidelines for the repair and maintenance of agricultural equipment
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SanPiN 2.1.5.980-00: Water diposal at inhabitted points. Sanitary protection of water bodies. Hygienic requirements to surface waters protection
SanPiN 2.1.7.573-96: Hygienic requirements to wastewater and sewage sludge which is used for land irrigation and fertilization
SanPiN 2.2.3.570-96: Hygienic Requirements for Coal Mining Industry and Organization of Work
SanPiN 2.3.4.004-97: Sanitary rules and regulations for mini-bakeries of St. Petersburg.
SanPiN 2.3.4.545-96: Production of bread, cakes and confectionaries
SanPiN 2.3.4.704-98: Production of rectified ethyl spirits, liquor and vodka products
SanPiN 5791-91: Sanitary rules and regulations on the design and operation of greenhouses and greenhouses
SNiP 2.01.09-91: Buildings and constructions in undermine territories and collapsible soils
SNiP 2.01.15-90: Engineering protection of territories, buildings and structures from hazardous geological phenomenon. Principal provisions of design
SNiP 2.01.28-85: Disposal areas for treatment and burial of toxic industrial wastes. Basic design provisions
SNiP 2.05.09-90: Tram and trolleybus lines
SNiP 2.06.14-85: Protection of Mining Excavations Against Groundwater and Surface Water
SNiP 2.06.15-85: Inundation & under-flooding. Area protection engineering
SNiP 2.09.03-85: Structures for industrial installations
SNiP 2.10.05-85: Organizations, buildings and structures used for storage and processing of grain
SNiP 22-02-2003: Engineering protection of territories, buildings and facilities against hazardous geological processes. Basic provisions
SNiP 32-02-2003: Subways
SNiP 32-03-96: Aerodromes
SNiP 32-04-97: Railway and highway tunnels
SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)
SNiP II-8-78: Buildings and Structures Constructed on Underworked and Subsiding Soils
SNiP II-A.14-71: Buildings and Structures Constructed on Underworked and Subsiding Soils
SO 002-02495342-2005: Roofs of buildings and structures. Design and construction. Standard of organization
SP 113.13330.2012: Parkings
SP 116.13330.2011: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles
SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.
SP 120.13330.2011: Subways
SP 120.13330.2012: Subway systems
SP 121.13330.2011: AERODROMES
SP 122.13330.2011: Railways and highway tunnels
SP 12-95: Instructions for the design of objects of internal affairs bodies (police) of the Ministry of Internal Affairs of Russia
SP 17.13330.2011: Roofs
SP 2.4.990-00: Hygienic Requirements for the Design and Maintenance of and Working Conditions in Orphanages and Boarding Schools for Orphans and Children Without Parental Care
SP 22.13330.2011: Buildings and structures foundations
SP 226.1326000.2014: Power supply of not traction consumers. Rules for design, construction and renovation
SP 30.13330.2012: Domestic water supply and sewerage of buildings.
SP 30-102-99: Planning and construction of low-rise housing construction territories
SP 31-106-2002: Design and construction of engineering systems of single-family residential houses
SP 31-114-2004: Rules for the design of residential and public buildings for the construction in seismic areas
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 32-105-2004: Subways
SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85
SP 40-102-2000: Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80
SP 40-105-2001: Design and installation of underground sewage pipelines made of fibreglass pipes
SP 40-109-2006: Code of practice for design and installation of water and sewer systems with pipes made of high-strength ductile iron and nodular graphite
SP 50-101-2004: Design and construction of soil bases and foundations for buildings and structures
SP 98.13330.2012: Tram and trolleybus lines
ST SSFZhT TsL 040-99: Services provided to passengers on federal railway transport. Typical methodology for assessing compliance with services requirements
STA 25.03.02-2004: Combined security system
STN Ts 01-95: 1520-mm Gauge Railways
TR 101-07: Technical recommendations for the design and construction of non-pressure underground pipelines for domestic and rainwater sewage from polyethylene pipes with a two-layer profiled wall "Korsis"
TR 102-08: Technical recommendations for the design and construction of underground pipeline systems for non-pressure utility sewage and rainwater drains using polyethylene wells
TR 168-05: Technical recommendations for the design, installation and operation of drainage from polyethylene pipes with filter sheath
TR 170-05: Technical recommendations for the design and construction of underground drainage networks of non-pressure polyethylene pipes with a double-layer wall
TSN 11-301-2004: Regulation on the procedure for the rehabilitation of unauthorized landfills in the city of Moscow
TSN 21-301-2001: Passenger Motor Vehicle Parking Facilities
TSN 21-301-96: Passenger Vehicle Parking Facilities
TSN 23-346-2003: Construction climatology. Samara Region
TSN 23-357-2004 Bashkortostan Republic: Building climatology
TSN 30-302-99 PO: The procedure for the development, coordination and approval of design documentation for individual housing construction in the Penza region
TSN 30-303-2000 MO: Planning and development of urban and rural settlements. Moscow region
TSN 30-304-2000: City of Moscow Planning and Development Code
TSN 30-305-2002: Urban planning. Reconstruction and development of non-central areas of St. Petersburg
TSN 30-306-2002: Reconstruction and development of historically developed areas of St. Petersburg
TSN 30-307-2002: Design Standards for Integrated Site Improvements and Amenities in the City of Moscow
TSN 30-310-2003: Garbage disposal and arrangement of landfills for the disposal of municipal solid waste from rural settlements. Samara Region
TSN 30-311-2004: Urban planning. Planning and development of urban and rural settlements of the Yamalo-Nenets Autonomous Okrug
TSN 31-309-98: Car parks. Design Standards. Nizhny Novgorod
TSN 31-319-99: Consumer services enterprises
TSN 31-322-2001: Rolled and mastic roofs of residential and public buildings. Khanty-Mansi Autonomous Area
TSN 40-301-97: Regional Building Code for Water Supply and Drainage Systems for Low-Rise Residential Projects Located in the Moscow Region
TSN 40-302-2001: Rainwater drainage. Organization of collection, treatment and disposal of surface runoff. Moscow region.
TSN 40-303-2003: Trenchless Installation of Utility Lines Using Microtunneling Complexes and Rehabilitation of Pipelines Using Special Equipment
TSN JeK 97 MO: Technical rules and norms for the construction, operation and monitoring of the construction of water disposal systems for low-rise buildings in the Moscow region
TSN MU 97: Guidelines (regulations) on certification of water treatment equipment for individual (household) and collective use of water supply and sanitation in the Moscow region
TSN PMS 97: Composition, procedure for the development, approval and approval of project documentation for individual low-rise housing construction in the Moscow region
Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction
VNP-10041-2002: Departmental norms and rules for creating coastal fishing enterprises. Treatment facilities
VNTP 01-98: Land-reclamation systems and facilities. Irrigation systems using sewage and animal waste
VNTP 03-91: Departmental standards of technological design of sugar beet factories. Volume 2, Part 1. Appendices
VNTP 04-94: Engineering Design Standards for Wine Bottling Plants
VNTP 12-92 KD: Interim Engineering Design Standards for Facilities for Production of Canned Foods for Child Nutrition
VNTP 12-94K: Engineering Design Standards Facilities of the Canned Fruits and Vegetables Industry
VNTP 13-2-93: Norms of technological design of mining enterprises of metallurgy with underground mining method
VNTP 26-94: Standards for technological design of sparkling wine factories (production of Soviet champagne using a continuous tank method)
VNTP 32-83: Coal and shale mines, pits and concentrating factories. Section "Sanitary-technical installations and calorific installations of shafts of mines"
VNTP 34-93: Engineering Design Standards for Alcohol Industry Facilities
VNTP 35-93: Engineering Design Standards for Alcoholic Beverage Plants/Distilleries
VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
VNTP 40-91: Engineering Design Standards for Nonalcoholic Beverage Plants (Shops)
VNTP 51-1-88: Industry norms of technological design of Installations for Production and Storage of Liquefied Natural Gas, Isothermal Storages and Gas Filling Stations
VNTP-88: Departmental norms of technological design of washing and steaming stations
VNTP-K-97: Sewerage of rural areas and farms
VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines
VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)
VSN 003-88: Design and Installation Guidelines to Plastic Piping
VSN 01-89: Enterprises for servicing motor vehicles
VSN 01-91: Railway stations for passengers of direct communication. Design Standards
VSN 07/02/34 Russian Defense Ministry: Design of fuel depots of the Ministry of Defense of the Russian Federation
VSN 13-2002: Instructions for the design of fire and explosion hazardous production of alcohol, alcoholic beverage and brandy enterprises of the food industry
VSN 13-94: Instructions for the design of fire and explosion hazardous production of alcohol, alcoholic beverage and brandy enterprises of the food industry
VSN 20-95: Industry-Specific Building Code for the Design and Installation of Underground Sewer and Water Mains Made of Polyvinylchloride Pipes
VSN 2-89: Rehabilitation and Development of Historical Districts of St. Petersburg
VSN 33-2.2.12-87: Irrigation and Drainage Systems and Structures. Pumping Stations. Design Standards
VSN 34-94 Russian Defense Ministry: Planning and development of military camps
VSN 61-89: Exploration, design and construction of the railways in regions of the permafrost
VSN 64-064-88: Instructions for the construction design of the medical and microbiological industry
VSN AV-PAS-94: Bus stations and passenger bus stations
VSN-APK 2.30.05.001-2003: Melioration. Guidance on protection of acres violated by water-erosion. Mesh structures of soil-saving installations
VSP 32-03-04 MO RF: Instructions for the design of drainage and drainage systems on the airfields of airfields
VUTP-97: Departmental guidelines for the technological design of industrial water supply, sewage and wastewater treatment of oil refining enterprises
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
