GOST 14014-91
ГОСТ 14014-91
|
|
Digital instruments and measuring transducers of voltage, current and resistance
Приборы и преобразователи измерительные цифровые напряжения, тока, сопротивления. Общие технические требования и методы испытаний
Status: Valid - Supersedes
The standard applies to general-use measuring instruments: digital measuring instruments designed to measure DC voltage and (or) DC current, and (or) AC voltage and (or) AC current (mean straight and RMS values), and (or) resistance direct current, as well as multimeters (universal voltmeters, combined devices) in terms of measuring the above physical quantities; measuring analog-to-digital converters that convert electrical continuous signals of constant voltage or current into coded signals; units (components) of measuring systems of general use, designed to perform the functions specified above, and which are measuring instruments.
Стандарт распространяется на средства измерений общего применения: цифровые измерительные приборы, предназначенные для измерения постоянного напряжения и (или) силы постоянного тока, и (или) переменного напряжения и (или) силы переменного тока (средневыпрямленные и среднеквадратические значения), и (или) сопротивления постоянному току, а также на мультиметры (универсальные вольтметры, комбинированные приборы) в части, касающейся измерения указанных выше физических величин; измерительные аналого-цифровые преобразователи, преобразующие электрические непрерывные сигналы постоянного напряжения или тока в кодированные сигналы; блоки (составные части) измерительных систем общего применения, предназначенные для выполнения функций, указанных выше, и являющиеся средствами измерений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR Standardization and Metrology Committee,
12/29/1991
SKU: RUSS19211
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.4 Instruments for electrical and magnetic measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.220 Electricity. Magnetism. Electrical and magnetic measurements »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.220 Electricity. Magnetism. Electrical and magnetic measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.220 Electricity. Magnetism. Electrical and magnetic measurements »
17.220.20 Measurement of electrical and magnetic quantities »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.220 Electricity. Magnetism. Electrical and magnetic measurements »
17.220.20 Measurement of electrical and magnetic quantities »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P3 Instruments for electrical and magnetic measurements »
P30 Classification, nomenclature and general rules »
National Standards for OKSTU »
GENERAL PURPOSE INSTRUMENTS AND AUTOMATION »
Electrical digital instruments (including analog-to-digital converters) »
As a Replacement Of:
GOST 14014-82: Digital instruments and measuring transducers of voltage, current and resistance. General specifications
GOST 4.300-85: Quality indicator system. Digital instruments and measuring transducers of voltage, current and resistance. List of characteristics
The Document References:
GOST 12997-84: SSI Products. General specifications
GOST 13033-84: Gsp. Electrical analog equipment and means for automation
GOST 13109-87: Electric energy. Requirements for quality of electric energy in general-purpose networks
GOST 16263-70: State system for ensuring the uniformity of measurements. Metrology. Terms and definitions
GOST 19876-81: Dc measuring digital bridges
GOST 21128-83: Power supply systems, nets, sources, converters and receivers of electric energy. Rated voltages to 1000 V
GOST 22261-82: Means for measuring of electrical quantities. General technical specifications
GOST 22261-94: Measuring instruments for electrical
GOST 23913-79: Electrometric measuring instruments
GOST 26.013-81: Measurement and automation means. Input and output electrical signals with discrete change of parameters
GOST 26.014-81: Measurement and automation means. Input and output electric coding signals
GOST 26104-89: Electronic measurement instruments
GOST 27883-88: Industrial process measurement and control equipment. Reliability. General requirements and test methods
GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold
GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat
GOST 28201-89: Basic environmental testing procedures. Part 2. Tests. Test Ca: Damp heat, steady state
GOST 28202-89: Basic environmental testing. Part 2. Tests. Test Sa: Simulated solar radiation at ground level
GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )
GOST 28204-89: Basic environmental testing procedures. Part 2. Tests. Test Ga and quidance: Acceleration, steady state
GOST 28205-89: Basic environmental testing procedures. Part 2. Tests. Guidance for solar radiation testing
GOST 28206-89: Basic environmental testing procedures. Part 2. Tests. Test J. and quidance: Mould growth
GOST 28207-89: Basic environmental testing procedures. Part 2. Tests. Test Ka: Salt mist
GOST 28208-89: Basic environmental testing procedures. Part 2. Tests. Test M: Low air pressure
GOST 28209-89: Basic environmental testing procedures. Part 2. Tests. Test N: Change of temperature
GOST 28210-89: Basic environmental testing procedures. Part 2. Tests. Test Q: Sealing
GOST 28211-89: Basic environmental testing procedures. Part 2. Tests. Test T: Soldering
GOST 28212-89: Basic environmental testing procedures. Part 2. Tests. Test U: Robustness of terminations and integral mounting devices
GOST 28213-89: Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock
GOST 28214-89: Basic environmental testing procedures. Part 2: Tests. Guidance for damp heat tests
GOST 28215-89: Basic environmental testing procedures. Part 2. Tests. Test Eb and quidance: Bump
GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
GOST 28217-89: Basic environmental testing. Part 2. Tests. Test Ec: Drop and Topple, primarily for equipment-type specimens
GOST 28218-89: Basic environmental testing procedures. Part 2. Tests. Test Ed: Free fall
GOST 28219-89: Basic environmental testing procedures. Part 2. Tests. Guidance on change of temperature tests
GOST 28220-89: Basic environmental testing procedures. Part 2. Tests. Test Fd: Random vibration wide band. General requirements
GOST 28221-89: Basic environmental testing procedures. Part 2. Tests. Test Fda: Wide band random vibration. High reproducibility
GOST 28222-89: Basic environmental testing procedures. Part 2. Tests. Test Fdb: Random vibration wide band. Reproducibility medium
GOST 28223-89: Basic environmental testing procedures. Part 2. Tests. Test Fdc: Random vibration, wide band. Reproducibility low
GOST 28224-89: Basic environmental testing procedures. Part 2. Test Z/AD. Composite temperature and humidity cyclic test
GOST 28225-89: Basic environmental testing procedures. Part 2. Tests. Test Z/AMD: Combined sequential cold, low air pressure and damp heat test
GOST 28226-89: Basic environmental testing procedures. Part 2. Tests. Test Kc: Sulphur dioxide test for contacts and connections
GOST 28227-89: Basic environmental testing procedures. Part 2. Tests. Test Kd: Hydrogen sulphide test for contacts and connections
GOST 28228-89: Basic environmental testing procedures. Part 2. Tests. Guidance on test T: Soldering
GOST 28229-89: Basic environmental testing procedures. Part 2. Tests. Test XA and guidance. Immersion in cleaning solvents
GOST 28230-89: Basic environmental testing. Part 2. Tests. Guidance to test Kd: Hydrogen sulphide test for contacts and connections
GOST 28231-89: Basic environmental testing procedures. Part 2. Tests. Mounting of components, equipment and other articles for dynamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance
GOST 28232-89: Basic environmental testing procedures. Part 2. Tests. Guidance on the application of the tests of IEC publication 68 to simulate the effects of storage
GOST 28233-89: Basic environmental testing procedures. Part 2. Tests. Guidance to test Kc: Sulphur dioxide test for contacts and connections
GOST 28234-89: Basic environmental testing procedures. Part 2. Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)
GOST 28235-89: Basic environmental testing procedures. Part 2. Tests. Test Ta: Soldering. Solderability testing by the wetting balance method
GOST 28236-89: Basic environmental testing procedures. Part 3. Background information. Section 1. Cold and dry heat tests
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements
GOST 8711-78: Ammeters and voltmeters. General technical specifications
GOST 9181-74: Electrical measuring instruments. Packing, marking, transport and storage
GOST R 51350-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
The Document is Referenced By:
GOST 32410-2013: Emergency crash-systems railway rolling stock for passenger transportations. Technical requirements and methods of control
GOST R 54418.12.1-2011: Wind turbines. Power performance measurements of electricity producing wind turbines
GOST R 70479-2022: Apparatus for ultrasound therapy. General specifications
GOST R 8.597-2003: State system of insuring the uniformity of measurements. Coaxial loads. Method of verification
GOST R 8.655-2009: State system for ensuring the uniformity of measurements. Quality factors of electric power measuring instruments. General specification
MI 2156-91: Recommendation. GSE. State verification schedule for measuring instruments of direct current voltage in the range of 1 - 800 kV
ST RK 1531-2006: Locomotives of main railways of 1520 mm gage. AC electric rotating tractive machinery. Requirements for acceptance programmes and test procedures
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
