imgalt

GOST R 51330.0-99

ГОСТ Р 51330.0-99

Explosionproof electrical apparatus. Part 0. General requirements

Электрооборудование взрывозащищенное. Часть 0. Общие требования

Status: Not effective - Canceled. Information about the registration of 1853-st dated November 29, 2012 (the official website of Rosstandart); IUS 12-2013

This standard applies to explosion-proof products covered by the activities of the International Electrotechnical Commission: explosion-proof electrical products and instrumentation, products for the provision of information technology and other

Настоящий стандарт распространяется на взрывозащищенные изделия, охватываемые деятельностью Международной Электротехнической Комиссии: взрывозащищенные изделия электротехнические и приборостроения, изделия для обеспечения информационных технологий и другие

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of Russia, 12/9/1999

SKU: RUSS19272

Price: $946.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 29 Electrical Engineering »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 012/2011 TR CU. On safety equipment for work in explosive environments » Regulations and standards (to TR CU 012/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.10 Operation of electrical installations, electrical equipment and power tools »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

ISO classifier » 29 ELECTRICAL ENGINEERING » 29.260 Electrical equipment for working in special conditions » 29.260.20 Electrical equipment for an explosive atmosphere »

National standards » 29 ELECTRICAL ENGINEERING » 29.260 Electrical equipment for working in special conditions » 29.260.20 Electrical equipment for an explosive atmosphere »

National Standards for KGS (State Standards Classification) » Latest edition » E Power and electrical equipment » E0 General rules and regulations for electrical and heat engineering » E02 Norms of calculation and design »

National Standards for OKSTU » ELECTRICAL EQUIPMENT AND MATERIALS » General rules and regulations »


The Document References:

GOST 11074-93: Hexagonal socket flat-point set screws. Product grades A and B. Specifications

GOST 11075-93: Hexagonal socket dog-point set screws. Product grades A and B. Specifications

GOST 11262-80: Plastics. Tensile strength test method.

GOST 11284-75: Through holes for fasteners. Dimensions

GOST 11738-84: Hexagon socket head cap screws, accuracy class A. Construction and dimensions

GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.10-87: Occupational safety standards system. Installations, generators and induction heaters for electrothermics, ultrasonic installations and generators. Safety requirements

GOST 12.2.007.11-75: Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements

GOST 12.2.007.12-88: Chemical current sources

GOST 12.2.007.13-2000: Occupation safety standards system. Electric lamps. Safety requirements

GOST 12.2.007.13-88: Electric light bulbs

GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements

GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements

GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements

GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v

GOST 12.2.007.4-75: Cabinets for switchgear and control gear and unitized transformer substations

GOST 12.2.007.5-75: Occupation safety standards system. Safety requirements. Power capacitors. Capacitor installations

GOST 12.2.007.6-75: Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v

GOST 12.2.007.8-75: Devices for electric welding and plasma treatment

GOST 12.2.007.9.8-89: Occupational safety standards system. Electrical thermal equipment. Electro-slag remelting furnaces. Safety requirements

GOST 12.2.007.9-75: Occupational safety standards system. Electric ovens. Safety requirements

GOST 12.2.007.9-93: Electric heating equipment safety

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 1481-84: Hexagon-head dog-point set screws. Product grades A and B. Construction and dimensions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines

GOST 18311-80: Electrical products. Terms and definitions of basic concepts

GOST 20403-75: Rubber. Method for determination hardness in international units (30 to 100 IRHD)

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 21207-81: Plastics. Method for determination of flammability

GOST 21341-75: Plastics and ebonite. Method of determining the Martens heat resistance temperature

GOST 24032-80: Mine instruments for gas analysis. General technical requirements. Testing methods

GOST 24786-81: Explosion protected light devices for mines. General specifications

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 28964-91: Hexagon socket set screws with cup point. Specifications

GOST 4647-80: Plastics. Method for determination of Charpy's impact strength

GOST 4648-71: Plastics. Method of static bending test

GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions

GOST 5927-70: Hexagon nuts (high precision). Construction and dimensions

GOST 7795-70: Hexagon reduced bead bolts with guide neck product grade B. Construction and dimensions.

GOST 7796-70: Hexagon reduced head bolts product grade B. Construction and dimensions

GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions

GOST 7805-70: Hexagon bolts, product grade A. Construction and dimensions

GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan

GOST 8878-93: Hexagonal socket cone-point set screws. Product grades A and B. Specifications

GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state

GOST R 51330.18-99: Electrical apparatus for explosive gas atmospheres. Part 19. Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives)

GOST R 51330.19-99: Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapors relating to the use of electrical apparatus

GOST R 51330.20-99: Mining electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and testing methods

GOST R 51330.2-99: Explosion-proof electrical equipment. Part 1. Explosion protection of the

GOST R 51330.5-99: Explosion-proof electrical equipment. Part 4. Method for determining the self-ignition temperature

The Document is Referenced By:

FR 1.29.2009.06689: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement procedure in vertical tanks

GOST 12.2.059-81: Occupational safety standards system. Mine apparatus for electric blasting. Safety requirements

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 12.2.112-86: Occupational safety standards system. Mine electric locomotive transport. General requirements for rolling stock

GOST 18910-96: Hydraulic instruments and devices. General specifications

GOST 20680-2002: Mechanical mixing devices (agitated vessels). General specifications

GOST 22387.2-2014: Combustible natural gases. Methods for determination of hydrogen sulphide and mercaptan sulphur

GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp

GOST 24032-80: Mine instruments for gas analysis. General technical requirements. Testing methods

GOST 24979-81: Constant speed electrical actuators for remote control. Types and basic parameters. Technical requirements

GOST 26917-2000: Underground loading machines. General technical requirements and test methods

GOST 29226-91: Viscometers for liquids

GOST 31558-2012: Mine belt conveyers. General specifications

GOST 31610.0-2012: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements

GOST 31612-2012: Leakage electric current mine-type protective devices for voltage nets to 1200 V. General technical requirements

GOST 31613-2012: Static electricity spark safety. General technical requirements and test methods

GOST 31614-2012: Explosion-proof mine electromagnetic starters up to 1140 V. Technical requirements and test methods

GOST 31840-2012: Submersible pumps and pump units. Safety requirements

GOST 4.154-85: Product-quality index system. Electrical rotating frames, number above 56 to 355 including. Nomenclature of indices

GOST 4.173-85: System of product-quality indices. Factory-assembled switch-gears for voltage above 1000 V. Nomenclature of indices

GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications

GOST 6625-85: Mine local ventilating fans

GOST IEC 61241-1-1-2011: Electrical apparatus for use in the presence of combustible dust. Part 1. Electrical apparatus protected by enclosures and surface temperature limitation. Section 1. Specification for apparatus

GOST R 22.1.14-2013: Safety in emergencies. Information-computational complexes of Structured system for monitoring and control of building/construction engineering equipment. Technical requirements. Test methods

GOST R 22.1.15-2014: Safety in emergencies. Technical tools monitoring natural and technological emergencies. Classification. General technical requirements

GOST R 41.105-2005: Uniform provisions concerning the vehicles intended for the carriage of dangerous goods with regard to their specific constructional features

GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods

GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General

GOST R 51241-2008: Access control units and systems. Classification. General technical requirements. Test methods

GOST R 51323.3-99: Plugs, socket-outlets and couplers for industrial purposes. Part 3. Particular requirements for plugs, socket-outlets, connectors and appliance inlets for use in explosive gas atmospheres

GOST R 51330.10-99: Electrical apparatus for explosive gas atmospheres. Part 11. Spark-free power line, type i

GOST R 51330.13-99: Explosion protected electrical apparatus. Part 14. Electrical installations in explosive gas environments (other than mines)

GOST R 51330.14-99: Electrical apparatus for explosive gas atmospheres. Part 15. N type protection.

GOST R 51330.15-99: Electrical apparatus for explosive gas atmospheres. Part 16. Artificial ventilation for the protection of analyzer(s) houses

GOST R 51330.16-99: Explosion protected electrical apparatus. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)

GOST R 51330.17-99: Explosion-protected electrical apparatus. Part 18. Type of protection (m)

GOST R 51330.1-99: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus

GOST R 51330.19-99: Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapors relating to the use of electrical apparatus

GOST R 51330.2-99: Explosion-proof electrical equipment. Part 1. Explosion protection of the

GOST R 51330.3-99: Explosion protected electrical equipment. Part 2. Filling or purging of the pressurized enclosure P

GOST R 51330.6-99: Electrical apparatus for explosive gas atmospheres. Part 5. Quartz filling of q-shell

GOST R 51330.7-99: Explosion-proof electrical apparatus. Part 6. Oil-filled "o" enclosures

GOST R 51330.8-99: Explosionproof electrical apparatus. Part 7. Type e protection.

GOST R 51350-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements

GOST R 51558-2008: Security television means and systems. Classification. General technical requirements. Test methods

GOST R 51635-2000: Nuclear material radiation monitors. General specifications

GOST R 51984-2002: Mine belt conveyers. General specifications

GOST R 52065-2003: Miner's explosion protected caplights. Part 1. General requirements and test methods

GOST R 52066-2003: Miner's explosion protected caplights. Part 2. Performance requirements

GOST R 52136-2003: Electrical apparatus for the detection and measurement of flammable gases. Part 1. General requirements and test methods

GOST R 52273-2004: Leakage electric current mine-type protective devices for voltage nets to 1200 V. General technical requirements

GOST R 52274-2004: Static electricity spark safety. General technical requirements and test methods

GOST R 52275-2004: Explosion-proof mine electromagnetic starters up to 1140 V. Technical requirements and test methods

GOST R 52319-2005: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements

GOST R 52350.1-2005: Electrical apparatus for explosive gas atmospheres. Part 1. Flameproof enclosures 'd'

GOST R 52350.14-2006: Electrical apparatus for explosive gas atmospheres. Part 14. Electrical installations in hazardous areas (other than mines)

GOST R 52350.17-2006: Electrical apparatus for explosive gas atmospheres. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)

GOST R 52350.25-2006: Electrical apparatus for explosive gas atmospheres. Part 25. Intrinsically safe systems

GOST R 52350.27-2005: Electrical apparatus for explosive gas atmospheres. Part 27. Fieldbus intrinsically safe concept (FISCO) and fieldbus non-incendive concept (FNICO)

GOST R 52350.29.1-2010: Explosive atmospheres. Part 29-1. Gas detectors. General technical requirements and test methods for the detectors for flammable gases

GOST R 52743-2007: Pumps and pump units for pumping of liquids. General safety requirements

GOST R 52744-2007: Submersible pumps and pump units. Safety requirements

GOST R 52776-2007: Rotating electrical machines. Rating and performance

GOST R 52931-2008: Instruments for process monitoring and control. General specifications

GOST R 53649-2009: Shearers. General technical requirements. Test methods

GOST R 53650-2009: Plough installations. General specifications

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 53674-2009: Pipeline valves. Nomenclature of characteristics. Check-lists for design and order

GOST R 53762-2009: Natural combustible gases. Determination of hydrocarbon dew point temperature

GOST R 53763-2009: Natural combustible gases. Determination of water dew point temperature

GOST R 54466-2011: Rotating electrical machines. Asynchronous explosion-proof motors of power from 0,25 to 400 kW inclusive. General technical requirements and test methods

GOST R 54775-2011: Powered support pumping stations. General technical requirements. Test methods

GOST R 54776-2011: Occupational safety standards system. Equipment and facilities for prevention and localization explosions of dust-air mixtures in coal mines dangerous on gas and dust. General technical requirements. Safety requirements and test methods

GOST R 54777-2011: Automatic systems for explosions localization and suppression of methane-dust-air mixture explosions in coal mines. General technical requirements. Test methods

GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55152-2012: Mining equipment. Mobile armoured face conveyors. General technical requirements and test methods

GOST R 55156-2012: Mining equipment. Mine belt stage loader. General technical requirements and test methods

GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods

GOST R 55160-2012: Mining equipment. Mine face conveyers jacks. General technical requirements and test methods

GOST R 55164-2012: Mining equipment. Movable mine compressor stations. Safety requirements and test methods

GOST R 55233-2012: Intelligent gas sensor modules. General technical requirements and methods of testing

GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications

GOST R 55560-2013: Inland water transport. Operation of cargo transfer complexes and passenger terminals of river ports. Safety requirements. General

GOST R 55998-2014: Petroleum and natural gas industries. Offshore production installation. Evacuation ways and temporary safe refuges. General requirements

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 56006-2014: Pipeline valves. Testing and acceptance on objects of the gas main pipelines before commissioning. General technical requirements

GOST R 56021-2014: Liquefied natural gas. Fuel for internal-combustion engine and generating unit. Specifications

GOST R 57548-2017: Vacuum induction melting for obtaining products with single-crystal structure. Technical requirements

GOST R 8.595-2002: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements to procedures of measurements

GOST R 8.595-2004: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements

GOST R 8.660-2009: State system for ensuring the uniformity of measurements. Industrial application level gauges. Calibration methods

GOST R 8.733-2011: State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements

GOST R 8.785-2012: State system for ensuring the uniformity of measurements. Mass of hydrocarbon condensate, liquefied hydrocarbon gas and long distillate of light hydrocarbons. General requirement for procedure (methods) of measurements

GOST R 8.787-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement of the fuel oil mass in railway tanks. General metrological requirements

GOST R IEC 60034-12-2009: Rotating electrical machines. Part 12. Starting performance of single-speed three-phase cage induction motors

GOST R IEC 60050-426-2006: International electrotechnical vocabulary. Chapter 426. Electric equipment for explosive atmospheres

GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements

GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements

GOST R IEC 60598-1-99: Luminaires. Part 1. General requirements and tests

GOST R IEC 61241-11-2009: Electrical apparatus for use in the presence of combustible dust. Part 11. Protection by intrinsic safety «iD»

GOST R IEC 61241-1-1-99: Electrical apparatus for use in the presence of combustible dust. Part 1-1. Electrical apparatus protected by enclosures and surface temperature limitation. Specification for apparatus

GOST R IEC 61241-1-2-99: Electrical apparatus for use in the presence of combustible dust. Past 1:2. Electrical apparatus protected by enclosures and surface temperature limitation. Selection, installation and maintenance

GOST R IEC 62086-1-2003: Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating. Part 1. General and testing requirements

IM 14-11-2005: Automation. Converters for communication of devices and regulators of various systems, power supplies, root extraction blocks, safety barriers and spark protection barriers. Directory

IM 14-1-2004: Automation tools. Instruments for measuring and regulating the level. Directory

IM 14-12-2004: Automation. Instruments for measuring and regulating pressure and vacuum. Nomenclature directory

IM 14-13-2006: Automation systems. Signaling devices. Information display tools. Directory

IM 14-23-2005: Means of fire and burglar alarm. Directory

IM 14-24-2005: Electrotechnical Controls. Actuators, knife switches, disconnectors, push button switches (switches), push buttons, push buttons. Directory

IM 14-25-2005: Electrical engineering controls. Switches (switches). Microswitches (microswitches). Track switches (switches). Toggle switches. Directory

IM 14-3-2004: Automation. Electrical regulation systems. Executive mechanisms. Directory

IM 14-4-2004: Automation. Instruments for measuring and controlling flow and quantity. Directory

IM 14-7-2004: Automation. Instruments for measuring and regulating temperature. Part 2. Thermometers, alarms, indicators, frames, temperature relays, devices are different. Nomenclature directory

KPO 02.02.09-05: Catalog-list of equipment. Non-automatic switches (switches), control buttons, electric energy meters

KPO 02.05.09-06: Catalog-list of equipment. Connectors and sockets plugs, clips, boxes

MI 1974-2004: State system for ensuring uniformity of measurements. Turbine flow transducers. Method of verification

MI 2956-2005: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic transducers of oil consumption with a nominal diameter of 400 mm and more. Method of verification

MI 2972-2006: State system of measuring uniformity provision. Petroleum mass. Method of measuring by the system of petroleum quantity and properties measuring system No.1005 JSC ´Shugurovskiy petrochemical plant´

MI 2974-2006: State system of measuring uniformity provision. Class 2 piston-pipe calibration rigs. Verification method for class 1 piston-pipe calibration rig with comparator

MI 2975-2006: State system of measuring uniformity provision. Petroleum mass. Indirect measuring method of dynamic measurements on the registration point pump station 'Suslovo' JSC 'Uraltransnefteproduct'

MI 3151-2008: GSE. Mass flow meters. Methods of verification at the site of operation of a piston-calibration calibration unit complete with a flow density converter

MI 3241-2009: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement technique indirect method of dynamic measurements

MI 3242-2009: State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Methods of measurement in horizontal tanks

MI 3272-2010: State system for ensuring uniformity of measurements. Mass flow meters. On-site verification method with a compact prover complete with a turbine flow transducer and in-line density transducer

MI 3372-12: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Systems for measuring the quantity and quality of petroleum products. General technical and metrological requirements

MI 3380-2012: State system for ensuring uniformity of measurements. Volume flow transducers. Methods of verification on-site calibration equipment

OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.

PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries

PB 09-592-03: Rules for arrangement and safe operation of refrigerating systems

R 78.36.018-2011: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Dye penetrant inspection.

R 78.36.026-2012: Recommendations on the use of detection equipment based on various physical principles for the protection of fenced territories and open sites

R 78.36.028-2012: Technical devices for intrusion and threat detection of various types. Peculiarities of choice, operation and use depending on the degree of importance and hazard of the facilities

RD 16.407-2000: Explosionproof electrical apparatus. Repair

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SO 34.20.514-2005: Guidelines for the operation of the gas economy of thermal power plants

ST TsKBA 024-2006: Pipe fittings. Determination of residual life and reliability indicators

ST TsKBA 065-2008: Pipe fittings. The nomenclature of indicators. Questionnaires for design and order

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English
Price: $79.00
imgalt
Armour clothes. Classification and general technical requirements
Language: English
Price: $189.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $169.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Hotels design
Language: English
Price: $1,698.24
imgalt
Railroad rails. General specifications
Language: English
Price: $1,813.00
imgalt
Potassium chloride
Language: English
Price: $159.00
imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!