Provision on the system for technical diagnostics of welded vertical cylindrical oil and petroleum products tanks
Положение о системе технического диагностирования сварных вертикальных цилиндрических резервуаров для нефти и нефтепродуктов
Status: Effective
The provision applies to steel welded cylindrical tanks with a capacity from 100 to 50,000 m3 intended for the storage of oil and oil products
Положение распространяется на стальные сварные цилиндрические резервуары вместимостью от 100 до 50000 м3, предназначенные для хранения нефти и нефтепродуктов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
7/25/1995
SKU: RUSS19280
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Main materials »
Steel, cast iron »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.1. Common to various hazardous production facilities »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
1 General industrial safety requirements for operation of a hazardous production facility »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.40 Welds and welding »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
75.200.20 Storage facilities. Reservoirs. Handout devices »
The Document References:
GOST 1497-84: Metals. Methods of tension test
GOST 20911-89: Technical diagnostics. Terms and definitions
GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters
GOST 22762-77: Metals and alloys. Yield point hardness test by ball indentation
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
PB 03-440-02: Attestation rules for nondestructive inspection personnel
PB 08-622-03: Safety Rules and Regulations For Gas Processing and Production Plants
RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair
RD 153-39-019-97: Methodical instructions for determining the technological losses of oil at the enterprises of oil companies of the Russian Federation
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.
The Document is Referenced By:
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
PB 08-389-00: Safety Rules for Gas Processing Plants Production
PB 08-622-03: Safety Rules and Regulations For Gas Processing and Production Plants
RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks
RD 153-39.4-056-00: Main crude pipeline. Operations rules.
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD 153-39-026-97: Requirements for Chemical Products, Ensuring Their Safe Use in the Oil Industry
RD 413160-02-01297858-03: Corrosion protection rules for stock-tank oil vessels and for dynamic and technological oil settling vessels
RMG 116-2011: State system for ensuring the uniformity of measurements. Tanks of main oil lines and oil storage depots. Maintenance operations and metrological assurance under operating conditions
SO 34.23.501-2005: Guidelines for the operation of fuel oil facilities of thermal power plants
SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation
VRD 39-1.10-013-2000: Guidelines for the Use of Composite Materials Developed by Porseal Ltd (St. Petersburg) for Repair Purposes at Petroleum and Natural Gas Facilities (Includes "Analysis of Carrying Capacity of 530-1420-mm Pipelines Repaired with the Use of Composite Materi
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.