GOST 1414-75

ГОСТ 1414-75

Construction steel with enhanced and high machinability

Прокат из конструкционной стали высокой обрабатываемости резанием. Технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to hot-rolled, calibrated and ground products with special surface finish, intended for machining on machines and automatic machines, as well as for hot forming with subsequent machining, manufactured in bars and coils for the needs of the national economy and for export. In terms of the norms of chemical composition, the standard applies to ingots and all other types of rolled products (crimped blank, billet).

Стандарт распространяется на горячекатаный, калиброванный и обточенный прокат со специальной отделкой поверхности, предназначенный для обработки на станках и автоматах, а также для обработки давлением в горячем состоянии с последующей обработкой резанием, изготовляемый в прутках и мотках для нужд народного хозяйства и для экспорта. В части норм химического состава стандарт распространяется на слитки и все другие виды проката (обжатую болванку, заготовку).

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 20

Approved: USSR State Committee for Standards, 7/29/1975

SKU: RUSS19287

Price: $199.02




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.60 Steel bars and wire rod »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.60 Steel bars and wire rod »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V32 Rolled and shaped steel »


As a Replacement Of:

GOST 1414-54: Free-machining constructional steel. Specification

The Document References:

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 1051-73: Calibrated quality steel

GOST 11293-89: Gelatin. Specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 1414-54: Free-machining constructional steel. Specification

GOST 14955-77: Quality round steel with a special surface finish

GOST 1497-84: Metals. Methods of tension test

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 1763-68: Steel. Methods for determination of decarbonised layer depth

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 2590-88: Round steel bars. Dimensions

GOST 2591-88: Square Hot-rolled Steel Bars Dimensions

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 2879-88: Hot-rolled hexagonal steel. Range of sizes

GOST 3118-77: Reagents. Hydrochloric acid. Specifications

GOST 3760-79: Reagents. Ammonia water. Specifications.

GOST 4461-77: Reagents. Nitric acid. Specifications

GOST 4543-71: Structural alloyed steel

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 5657-69: Steel. Methods for the determination of hardenability

GOST 7417-75: Calibrated round steel

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 8559-75: Square bar steel. Products sizes

GOST 8560-78: Calibrated hexahedral rolled stock

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

The Document is Referenced By:

GOST 1051-73: Calibrated quality steel

GOST 10773-80: Grooved pins-full-length taper grooved. Specifications

GOST 14955-77: Quality round steel with a special surface finish

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)

GOST 18161-72: Gearboxes made of malleable cast iron Pd approx. 1,6 MPa (16 kgf/cm2). Specification

GOST 18162-72: Shut-off valves made of malleable iron for Pd approximately 1.6 MPa (16 kgf / cm2). Specification

GOST 18722-73: Shut-off sleeve valves made of malleable iron for Pd approximately 1.6 MPa (16 kgf / cm2). Specification

GOST 20365-74: Broaches round of variable cutting of diameters from 14 to 90 mm. Design and dimensions

GOST 20862-81: Adjusting fixturing hexahedral supports with threaded end and hole. Design and dimensions

GOST 20863-81: Adjusting fixturing rings supports with a flat, threaded end and hole. Design and dimensions

GOST 20864-81: Adjusting fixturing ring supports with slit, threaded end and hole. Design and dimensions

GOST 20865-81: Adjusting fixturing hexahedral supports with threaded holes. Design and dimensions

GOST 20866-81: Adjusting fixturing ring support with flats and threaded holes. Design and dimensions

GOST 20867-81: Adjusting fixturing ring with a slit and threaded holes. Design and dimensions

GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 25165-82: Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements

GOST 25681-83: Threaded pipeline connections. Rotary nipples. Design

GOST 25682-83: Threaded pipeline connections. Hollow bolts. Construction

GOST 27320-87: Expansive bolts. Construction

GOST 27702-88: Steel and alloys. Unified grades

GOST 31.0101.01-89: Hand wheels, rotating levers, handles, and knobs

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 400-80: Glass thermometers for testing of petroleum products. Specifications

GOST 4860.1-83: Glands for for electric cables and wires

GOST 607-80: Single point diamonds for dressing of grinding wheels

GOST 7328-82: General-purpose and reference mass gages

GOST 7948-80: Steel construction plumbs-lines. Specifications

GOST 8107-75: Valves for pneumatic tubes and tyres with constant pressure. General specifications

GOST 9.402-80: Metal surface preparation for painting

GOST 9650-80: Pins. Specifications

GOST 9984-85: Ceramic support insulators rated for voltage over 1000 v

GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 52082-2003: Support polymeric outdoor insulators for voltage 6-220 kV. General specifications

GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

IM 14-7-2004: Automation. Instruments for measuring and regulating temperature. Part 2. Thermometers, alarms, indicators, frames, temperature relays, devices are different. Nomenclature directory

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 34-13-128-82: Taper thread motor and tractor plugs. Design and dimensions. General specifications (restriction as per GOST 12717-78).

OST 37.001.179-82: Taper thread plugs. Specifications.

RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

GOST 11679.2-2019: Rubber-metal instrument dampers. Fittings. Technical specifications

GOST R 58513-2019: Plumbing steel construction. Technical conditions

R 4.054.004-89: Details from alloys of ferrous and non-ferrous metals. Thermal and chemical-thermal treatment. Typical Processes

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Hot-rolled sheet. Range
Language: English
Price: $72.27
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96
Hexagon head bolts. Product grades A and B
Language: English
Price: $203.94

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!