GOST 4543-71

ГОСТ 4543-71

Structural alloyed steel

Сталь легированная конструкционная

Status: Not effective - Superseded. Information on the registration of 10-st dated January 13, 2017 (the official website of Rosstandart); IUS 6-2017

The standard applies to hot-rolled and forged steel with a diameter or thickness of up to 250 mm, calibrated and with a special surface finish of alloyed structural steel, used in a heat-treated condition.

Стандарт распространяется на горячекатаный и кованый прокат диаметром или толщиной до 250 мм, калиброванный и со специальной отделкой поверхности из легированной конструкционной стали, применяемый в термически обработанном состоянии.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 48

Approved: USSR State Committee for Standards, 6/18/1971

SKU: RUSS19322

Price: $336.60




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Standards for pipe fittings (TPA) » 10. Production » 10.2 Billets (forgings, stampings, rolling, castings, etc.) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.60 Steel bars and wire rod »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.60 Steel bars and wire rod »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V32 Rolled and shaped steel »


The Document is Replaced With:

GOST 4543-2016: Metal products from structural alloy steel. Specification

As a Replacement Of:

GOST 4543-61: Alloy constructional steel. Grades and technical requirements

The Document References:

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 103-76: Hot-rolled steel strip. Dimensions

GOST 1051-73: Calibrated quality steel

GOST 1133-71: Forged round and square steel. Dimensions

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 14955-77: Quality round steel with a special surface finish

GOST 1497-84: Metals. Methods of tension test

GOST 162-90: Depth gauges. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 1763-68: Steel. Methods for determination of decarbonised layer depth

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 2216-84: Adjustable smooth snap gauges

GOST 22235-76: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 2590-88: Round steel bars. Dimensions

GOST 2591-88: Square Hot-rolled Steel Bars Dimensions

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 26877-91: Metal products

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 2879-88: Hot-rolled hexagonal steel. Range of sizes

GOST 3749-77: Checking 90° squares. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 5657-69: Steel. Methods for the determination of hardenability

GOST 6507-90: Micrometers. Specifications

GOST 7417-75: Calibrated round steel

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 8559-75: Square bar steel. Products sizes

GOST 8560-78: Calibrated hexahedral rolled stock

GOST 8817-82: Metals. Upsetting test method

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

The Document is Referenced By:

ATK 24.201.10-90: Inspection Windows for Steel Vessels and Apparatus. Types, Design, and Dimensions. Technical Requirements

ATK 24.218.01-90: Bosses, Plugs, and Gaskets. Design, Dimensions, and General Technical Specifications

ATK 24.218.04-90: Liquid mesh filters for pipelines. Design, dimensions and dimensions

ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

ATK 26-18-10-94: Devices for Installation of Temperature Measuring Devices for Use at Nominal Pressure from 0.6 to 16.0 MPa. Plugs. General Technical Requirements

GN 2.3.3.972-00: Nutrition hygiene. Package, crockery, equipment and other types of productions, contacting with food. Maximum admissible amounts (MAA) of chemical substances, emitting from materials contacting with food

GOST 10047-62: High speed steel cutting tools. Specifications

GOST 10083-81: Taper reamers with taper shank

GOST 10210-83: Pneumatic impact nut wrenches. Basic parameters

GOST 10234-77: Moderate strength flattened

GOST 10465-74: Pivoted core bit tongs

GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements

GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)

GOST 1051-73: Calibrated quality steel

GOST 10543-82: Surfacing steal wire. Specifications

GOST 10543-98: Steel surfacing wire. Specifications

GOST 10618-80: Self-tapping screws for metal and plastic

GOST 10673-75: T-slot cutters with hard metal tips. Specifications

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 10851-94: Friction articles manufactured from retinax

GOST 11042-90: Construction steel hammers. Specifications

GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel

GOST 11291-81: Carbide and hss tipped woodcutting disk grooving cutters

GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements

GOST 11871-88: Slotted round nuts, product grade A. Specifications

GOST 11906-77: Spiral bevel and hypoid gear-shaping cutter heads. Specifications

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 12.4.091-80: Plastic miner's helmets

GOST 12.4.128-83: Safety helmets

GOST 1203-75: The key of the brake shoe for cars of the railways with broad gauge 1520 mm. Specifications

GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications

GOST 12189-66: Holding devices. Eccentric cams. Design

GOST 12190-66: Holding devices. Double eccentric cams. Design

GOST 12191-66: Holding devices. Forked eccentric cams. Design and sizes

GOST 12192-66: Holding devices. Two-sided face eccentric cams. Design

GOST 12193-66: Holding devices. Movable prisms. Design

GOST 12194-66: Holding devices. Adjusting prisms. Design

GOST 12195-66: Holding devices. Knife-edges. Design

GOST 12196-66: Holding devices. Fixed prisms. Design

GOST 12197-66: Holding devices. Side fixing prisms. Design

GOST 12198-66: Holding devices. Guiding shoes. Design

GOST 12209-66: Holding devices. Cylindrical locating pins of permanent type. Design

GOST 12210-66: Holding devices. Cut locating pins of permanent type. Design

GOST 12211-66: Holding devices. Cylindrical locating pins of changeable type. Design

GOST 12212-66: Holding devices. Cut locating pins of changeable type. Design

GOST 12213-66: Holding devices. Locating pins. Design

GOST 12214-66: Holding devices. Bushes for indexes and locating pins with bead. Design

GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications

GOST 12461-67: Nuts hexagonal high with acme thread. Design

GOST 12462-67: Nuts hexagonal with bead and acme thread. Design

GOST 12464-67: Threaded bushes. Design

GOST 12468-67: Eccentrics double-supported. Design

GOST 12471-67: Levers cranked. Design

GOST 12472-67: Levers cranked, with two holes. Design

GOST 12473-67: Levers cranked, two-cam. Design

GOST 12474-67: Levers cranked with cam and slot. Design

GOST 12475-67: Levers cranked, two slot. Design

GOST 12492.0-90: Rolled stock for agriculture machinery

GOST 12492.6-90: Agricultural machinery. Ribbed bar strip section. Dimensions

GOST 12509-75: Carbide tipped counterbores. Technical requirements

GOST 12593-93: Metal cutting machine tools. Flanged spindle noses with swireluashers and flanges of fixtures. Basic and coupling dimensions

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12822-67: Flanges with a ledge or hollow, cast steel. Design, dimensions and technical requirements

GOST 12823-67: Flanges with a spike or groove cast of steel. Design, dimensions and technical requirements

GOST 12824-67: Flanges for the lens gasket, cast steel. Design, dimensions and technical requirements

GOST 12830-67: Flanges with a connecting lug, flat, steel, butt welded. Design, dimensions and technical requirements

GOST 12831-67: Flanges with lug or recess, steel, butt welded. Design, dimensions and technical requirements

GOST 12832-67: Flanges with spike or groove cast steel butt welded. Design, dimensions and technical requirements

GOST 12833-67: Flanges for the lined oval sectional lining, steel butt welded. Design, dimensions and technical requirements

GOST 12835-67: Flanges for the lens gasket of steel butt welded. Design, dimensions and technical requirements

GOST 12837-67: Blinds with a ledge of flanged steel. Design, dimensions and technical requirements

GOST 12838-67: Plugs with spike of flanged steel. Design, dimensions and technical requirements

GOST 12839-67: Blanking plugs for the oval section of flanged steel. Design, dimensions and technical requirements

GOST 12935-76: Free wheeling clutch of agricultural machines. Specifications

GOST 13044-85: Arbouns for shell multiflute drills and reamers. Construction and dimensions

GOST 13158-67: Screw sprags built-in for machine retaining devices. Design and dimensions

GOST 13160-67: Fixing devices with retractable handle for machine retaining devices. Design and dimensions

GOST 13161-67: Bayonet type indexes for machine retaining devices. Design and dimensions

GOST 13162-67: Rack type indexes for machine retaining devices. Design and dimensions

GOST 13163-67: Rack type clips with tapered lock for machine retaining devices. Design and dimensions

GOST 13215-79: Thrust centers and semi-centers

GOST 13297-86: Diamond cutting tools and inserts

GOST 13324-78: Hard coals. Method for determination of dilatometer characteristics

GOST 13324-94: Hard coals. Method for determination of dilatometer characteristiсs Audibert-Arnu dilatometer test

GOST 13334-67: Driver chucks. Design and dimensions

GOST 13336-67: Sleeves for tools with tapered shank. Design and dimensions

GOST 13440-68: Flat head rest buttons for machine retaining devices. Design

GOST 13441-68: Spherical head rest buttons for machine retaining devices. Design requirements

GOST 13444-68: Height ended fixtures for machine retaining devices. Design

GOST 13445-68: Angle fixtures for machine retaining devices. Design

GOST 13446-68: Angle ended fixtures for machine retaining devices. Design

GOST 13598-85: Adapters for mounting taper-shanked tools. Design and dimensions

GOST 13663-68: Shaped steel pipes technical requirements

GOST 13663-86: shaped steel pipes technical requirements

GOST 13785-68: Arbors with tapered shank 7:24 and face keys for shell face cutters. Design and dimensions

GOST 13786-68: Arbors with tapered 7:24 and longitudinal key for shell cutters. Design and dimensions

GOST 13787-68: Arbors with tapered shank and longitudinal key without lug for shall cutters. Design and dimensions

GOST 13788-68: Arbors with tapered shank and face keys without lug for shell face cutters. Design and dimensions

GOST 13789-68: Adapters for end cutters. With tapered shank. Design and dimensions

GOST 13790-68: Tapered adapters 7:24 for end cutters with tapered shank. Design and dimensions

GOST 13791-68: Tapered adapters 7:24 with end slot for cutters arbors. Design and dimensions

GOST 13792-68: Adapters with pulling-off nut for end cutters with tapered shank. Design and dimensions

GOST 13877-80: Sucker rods and couplings

GOST 13877-96: Sucker rods and sucker rod couplings. Specifications

GOST 13897-68: Check square countersunk headed screws with shortened cylindrical end. Design

GOST 13932-80: Combined arbor-type circular mills for woodcutting

GOST 13981-77: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 14727-69: Spherical and hexagon nuts. Design

GOST 14733-69: Hook clamps. Design

GOST 14737-69: Screw fixed sunk keys. Construction

GOST 14738-69: Stepped keys. Design

GOST 14739-69: Round keys. Design

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 14953-80: Taper countersinks

GOST 14955-77: Quality round steel with a special surface finish

GOST 1523-81: Straight reamers

GOST 15511-70: Back nuts for boring bars and boring arbors. Design

GOST 1555-67: Plate thrusts for machine retaining devices. Design

GOST 15622-96: Safety slipping couplings. Parameters, design and dimensions

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)

GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 15819-85: Oils РМ and РМЦ. Specifications

GOST 15850-84: Mine parachutes for cages

GOST 15851-84: Suspension devices for mine cages

GOST 15876-90: Gauges for products made from wood and wooden materials

GOST 15936-70: Quick-changing stiff adapters for taps. Design and dimensions

GOST 16014-78: Diamond rollers for dressing of abrasive wheels. Specifications

GOST 16078-70: Tube connections on internal cone. Technical requirements

GOST 160-84: Spindles for twisting and spinning machines

GOST 16211-70: Centre cone arbors. Design and dimensions

GOST 16213-70: Cylindrical stepped centre arbors. Design and dimensions

GOST 16463-2016: Solid carbide keyway cutters. Specifications

GOST 16491-80: Keyway broaches

GOST 16518-96: Machine vice with hand and mechanical drives

GOST 1677-75: Solid counterbores and high steel inserted blade counterbores. Technical requirements

GOST 16896-71: Flat bearers. Design

GOST 16897-71: Blade bearers. Design

GOST 16935-93: Manually and power driven round rotary tables

GOST 16983-80: Combination wrenches. Design and dimensions

GOST 17017-71: Carbide tools for making holes in building materials. Technical requirements

GOST 17024-2015: End mills. Specification

GOST 17024-82: End mills

GOST 17277-71: Solid carbide twist drills. Specifications

GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications

GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications

GOST 17528-72: Spindle cam arbors. Design and dimensions

GOST 17529-72: Spindle cam arbors with pneumatic clamp. Design and dimensions

GOST 17530-72: Flanged cam arbors. Design and dimensions

GOST 17531-72: Flanged cam arbors with pneumatic clamp. Design and dimensions

GOST 17535-77: Metal high precision parts of devices. Dimension stabilisation by heat treatment. Typical technological processes

GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods

GOST 1759.5-87: Nuts. Mechanical properties and test methods

GOST 17774-72: Pins locating cylindrical high. Design

GOST 17775-72: Pins locating cut high. Design

GOST 17776-72: Rest plates for locating pins. Design

GOST 17777-72: Washers bearing for locating pins. Design

GOST 17778-72: Washers bearing. Design

GOST 18064-2016: Solid carbide boring tools with steel shank. Specifications

GOST 18064-72: Solid carbide boring tools with steel shank. Specifications

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18104-81: Forms of steel for the manufacture of reinforced concrete centrifuged non-pressure pipes. Specification

GOST 18123-82: Washers

GOST 18126-72: Bolts, studs and nuts with thread diameter over 48 mm. Specifications

GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications

GOST 18372-73: Carbide end mills. Specifications

GOST 18386-73: Rigging assemblies. Connecting dimensions and technical requirements

GOST 18435-73: Jig bushes. Technical requirements

GOST 18514-73: End caps for rolling bearing blocks. Technical requirements

GOST 18572-2014: Rolling bearings. Axle box cylindrical roller bearings for rolling stock. Specification

GOST 18578-89: Builders axes. Specifications

GOST 18828-73: Ring single-ended square spanners. Design and dimensions

GOST 18886-73: Steel forms for the manufacture of reinforced concrete and concrete products. General technical requirements

GOST 18949-73: Carbide-tipped spherical, cylindrical and conical end milling cutters for cutting hardworking steels and alloys. Technical requirements

GOST 19191-73: Rigging screws with automatic stopping. Specifications

GOST 19257-73: Holes for threading metric thread. Diameters

GOST 19258-73: Bars for threading metric thread. Diameters

GOST 19271-73: Machine full-length cylinder end readers for processing details from light alloys. Technical requirements

GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications

GOST 19535-74: Flange joints for hydraulic and lubricating systems. Specifications

GOST 19596-87: Spades

GOST 20210-74: Slats, rectangular in height 45 mm with an installation hole diameter of 45 and 50 mm of universal prefabricated rectangular overhead conductors with 12 mm grooves. Design and dimensions

GOST 2034-80: Twist drills

GOST 20720-93: Double-slider couplings. Parameters and dimensions

GOST 20734-75: Hydraulic fluid 7-50C-3. Specifications

GOST 20944-75: Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity

GOST 2105-75: Forged and swaged hooks. Technical requirements

GOST 21167-75: Machine bar centering vices with screw and lever. Design and main dimensions

GOST 21348-75: Holes for threading pipe cylindrical thread. Diameters

GOST 21349-75: Bars for threading pipe taper screw thread. Diameters

GOST 21354-75: Cylindrical evolvent gearings. Strength calculation

GOST 21354-87: Cylindrical evolvent gears of external engagment. Strength calculation

GOST 21545-76: Solid carbide counterbores for machining stainless and high-temperature steels and alloys. Specifications

GOST 21546-88: Hammer dies for die forging

GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.

GOST 22130-86: Steel Pipeline Parts Movable supports and suspensions Specifications

GOST 22253-76: Friction draft gears for 1520 mm gauge railway rolling stock. Specifications

GOST 22356-77: High strength bolts and nuts аnd washes. General specifications

GOST 22661-77: Grapples for containers with a gross weight of 3.0, 5.0, and 6.0 metric tons

GOST 22749-77: Form-relieved milling cutters

GOST 22786-77: Bimetallic weldless tubes for shipbuilding

GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 2283-79: Cold-rolled tape made of tool steel and spring steel

GOST 22848-77: Metals. Method for testing the impact strength at temperature from -100 up to -269 °C

GOST 2287-88: Flat thread chasers

GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications

GOST 23230-78: Shut-off valves made of steel for Pd are approximately 16.0 MPa (160 kgf / cm2). Specification

GOST 23270-78: Pipe-billets for machining. General specifications

GOST 23270-89: Tube-billets for machining

GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage

GOST 2424-83: Grinding wheels

GOST 24339-80: Portable multi-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions

GOST 24340-80: Portable single-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions

GOST 24341-80: Portable multi-impressions press moulds for manufacturing rubber-fabric carrier rings. Design and dimensions

GOST 24342-80: Units of portable multi-impressions press moulds for manufacturing rubber-fabric chevron seals. Design and dimensions

GOST 24343-80: Portable single-impression press moulds for manufacturing rubber-fabric chevron collars. Design and dimensions

GOST 24344-80: Portable single-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions

GOST 24345-80: Portable single-impression press-moulds for manufacturing rubber-fabric carrier rings. Design and dimensions

GOST 24360-2016: Shell and mills with inserted carbide teeth. Specifications

GOST 24360-80: Shell-type face mills with inserted carbide teeth

GOST 24637-81: Carbide-tipped indexable end milling cutters for machining parts from high-strength steels and titanium alloys on N/C machine tools. Specifications

GOST 24638-85: Annular diamond drills for reinforced concrete constructions

GOST 24703-81: Optical Rulers. Types and main parameters. General technical requirements

GOST 24823-81: Broaches combined for 10-slitting holes with straight side profile and centring at outside diameter, alternatives. Double driven. Design and dimensions

GOST 24829-81: The sets of three cassette press moulds for manufacturing of rubber sealing cups. Design and dimensions

GOST 25149-82: The liquid N7. Specifications

GOST 25556-82: Set screws. Mechanical properties and test methods

GOST 25573-82: Freight handling rope slings for construction

GOST 25715-83: Steel hot-rolled rectangular steel slab (slabs). Specification

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 26238-84: Normal and high precision jig bushes. Technical requirements

GOST 26238-93: Jib bushes. Specifications

GOST 26258-87: Counterbores designed for working bearing surfaces under fastenings. Specifications

GOST 26259-87: Cuides. Design and dimensions

GOST 26298-84: Portable ream press moulds with conical break for manufacturing of rubber O-rings section. Design and dimensions

GOST 26506-85: Tools for cold-forming machines. Dies for cutting ofnut blanks. Construction and dimensions

GOST 26510-85: Tools for cold-forming machines. 4Th station dies. Construction and dimensions

GOST 26512-85: Tools for cold-forming machines. 1St station punches. Construction and dimensions

GOST 26516-85: Tools for cold-forming machines. 5Th station punches. Construction and dimensions

GOST 26584-85: Motorcycle helmets

GOST 26596-2016: Face milling cutters with mechanically clamped indexable carbide inserts. Specifications

GOST 26596-91: Non-adjustable milling cutters

GOST 26613-2016: Lathe tools with mechanically clamped changeable indexable inserts. Specifications

GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates

GOST 27036-86: Bellows metal expansion joints and seals

GOST 27053-86: Metal-cutting machine tools with programmed numerical control. Adjustable reducing bushings with internal morse cone and plain shank

GOST 27304-87: Metal-cutting machine tools with programmed numerical control

GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications

GOST 27702-88: Steel and alloys. Unified grades

GOST 27724-88: Drills with mechanical fixation of replaceable polyhedral plates

GOST 27788-88: Retention knobs for tool shanks with 7/24 taper design

GOST 27834-88: Tool joints for drill pipers. Specifications

GOST 27834-95: Tool joints for drill pipes. Specifications

GOST 2787-75: Recycled ferrous metals

GOST 28044-89: Internal broaches for straight splines based at internal diameter one pass combined type. Construction

GOST 28300-2010: Cardan shafts of traction drive of diesel locomotives and diesel trains. General specifications

GOST 2839-80: Double-ended open spanners. Construction and dimensions

GOST 28408-89: Manual hoists and trolleys. General specifications

GOST 2841-80: Single-ended open spanners. Constructions and dimensions

GOST 28433-90: Retrievers

GOST 28434-90: Overhead travelling stacker cranes

GOST 28436-90: End mills with mechanically clamped insrtr tips

GOST 28438-90: Disk milling cutters with mechanically clamped many-sided hard-alloy inserts

GOST 28442-90: Broaches for cylindrical, slitting and polyhedral profile holes. Specifications

GOST 28709-90: Helical end mills with elongated body and hard-alloyed change inserts

GOST 28719-90: Shell-type helical-flute cylindrical face milling cutters with replaceable carbide inserts

GOST 2876-80: Gripping collets. Basic and coupling dimensions

GOST 2877-80: The grips giving. Main and connecting dimensions

GOST 30482-97: Electroslag welding of steels. Requirements for technological process

GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications

GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications

GOST 30632-99: Brake block holder and key for 1520 mm main-line locomotives. General specifications

GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications

GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 30894-2003: Production well head equipment. General technical requirements

GOST 31.1066.01-85: Attachments for metall-cutting machine tools. Central readjustable mandrels with corrugated bushings for precision machining. Basic parameters and dimensions

GOST 31.1066.02-85: Attachments for metall-cutting machine tools. Mandrels with split collets for precision machining. Basic parameters and dimensions

GOST 31.1066.03-97: Central arbors for exact operations

GOST 31.1066.04-97: Attachments for metal-cutting tools. Cam arbors. General specifications

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 31.121.42-84: Elements and assemblies of universal built-up and re-adjustable equipment for metal-cutting machines

GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding

GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests

GOST 31428-2011: Shunting diesel locomotives. General technical requirements

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32405-2013: Solid hardmetal end mills. Specifications

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements

GOST 32885-2014: Automatic coupler model SA-3 and its components. Design and dimensions

GOST 33164.3-2014: Mining and tunneling equipment. Timbering, mechanized. Hydraulic control systems. Safety requirements and methods of testing

GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications

GOST 33434-2015: Coupler and automatic coupler device of railway rolling stock. Technical requirements and acceptance rules

GOST 34202-2017: Carbide burrs Technical conditions

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 3822-79: Bimetallic steel-copper wire

GOST 4046-80: Sine bars. Specifications

GOST 4047-82: Rim saws for metal cutting

GOST 4743-68: Rest plates for machine retaining devices. Design

GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications

GOST 5.403-70: Steel-teeming ladles. Quality requirements for certified products

GOST 5006-83: Toothed clutches. Specifications

GOST 5147-80: Joint clutches. Basic parameters. Design and dimensions

GOST 5147-97: Joint couplings. Parameters, design and dimensions

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 5286-75: Tool joints for pipe drills

GOST 5332-75: Rollers and spacings of roll tables of rolling mills. General specifications

GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5521-93: Shipbuilding rolled steel

GOST 5688-2015: Tools with carbide tips. Specifications

GOST 5688-61: Tools with carbide tips. Specifications

GOST 5735-81: Carbide tipped machine reamers. Specifications

GOST 5756-81: Carbide tipped twist drills

GOST 5808-77: Half-side and side-and-face milling cutters with inserted carbide blades. Techical specifications

GOST 5890-78: Pipe connection with screwed ends. Specifications

GOST 5984-80: Explosives. Methods for determination of brisance

GOST 5984-99: Explosives. Methods for determination of brisance

GOST 6086-75: Bits for drills. Technical requirements

GOST 6227-80: Taper-thread taps

GOST 6396-78: Carbide-tipped keyway milling cutters. Specifications

GOST 6619-75: Single and double horned lamellar hooks. Specifications

GOST 6899-75: Manual hoists and trolleys. General specifications

GOST 7063-72: T-slot cutters. Specifications

GOST 7140-81: Industrial explosives. Test methods in methanair and dustair mixtures

GOST 7140-98: Industrial explosives. Test methods in methane air and dust air mixtures

GOST 7275-75: Adjustable wrenches

GOST 7360-82: Subs for drilling strings

GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 7909-56: Drill prospecting pipes and coupling to them

GOST 7918-75: Tool joints for 50 mm diameter drilling pipes. Specifications

GOST 8319.0-75: Hot-rolled steel periodical lengthwise-rolled profiles. Specifications

GOST 8467-57: Drill pipes for exploration with nipple joint

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8483-81: Fishing taps and overshots for prospecting

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8565-81: Exploration bell sockets

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 8918-69: Hexagon nuts with bead. Design

GOST 8994-80: Wood-cutting cylindrical end milling cutters

GOST 9.402-80: Metal surface preparation for painting

GOST 9053-68: Rests plates for eccentrics and pressure screws for machine retaining devices. Design

GOST 9061-68: Round eccentric cams for machine retaining devices. Design

GOST 9140-2015: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications

GOST 9140-78: Keyway cutters. Specifications

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9539-72: Thread rolls. Specifications

GOST 9650-80: Pins. Specifications

GOST 9731-79: Large capacity seamless steel gas-cylinders for operation pressure 4.5 MPa (250 kgf / cm2)

GOST ISO 10817-1-2002: Vibration. Rotating shaft vibration measuring systems. Part 1. Relative and absolute sensing of radial vibration

GOST R 50300-92: Turning tools with indexable inserts of superhard materials. Specifications

GOST R 50302-92: Regrindale superhard material (composite) tipped cartridges for toolholders. Specifications

GOST R 50895-96: Toothed clutches. Specifications

GOST R 51047-97: Cutters for shearers and entry-driving machines. General specifications

GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications

GOST R 51161-98: Glass reinforced plastic sucker rods. Specifications

GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications

GOST R 51220-98: Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 51571-2000: Metal bellows expansion joints and seals. General technical requirements

GOST R 51681-2000: Pneumatic hammer drills. Drill steels. General technical requirements

GOST R 51981-2002: Assembly tools for screws and nuts. Four-way socket wrenches. Specifications

GOST R 52082-2003: Support polymeric outdoor insulators for voltage 6-220 kV. General specifications

GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions

GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods

GOST R 52217-2004: Sinking rope attachments. Specifications

GOST R 52277-2004: Tamping picks of ballast tampers for levelling and lining railway tracks. Specifications

GOST R 52338-2005: Industrial cleanliness. Methods for lubricating and cooling liquids testing

GOST R 52419-2005: Carbide tipped shell-type milling cutters for machining wood materials and plastics. Specifications

GOST R 52589-2006: Carbide tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

GOST R 52590-2006: Superhard tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications

GOST R 52780-2007: Hardmetal burrs. Specifications

GOST R 52781-2007: Grinding and tool-grinding wheels. Specifications

GOST R 53003-2008: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications

GOST R 53004-2008: T-slot cutters. Specifications

GOST R 53269-2009: Fire equipment. Helmets for fire-fighters. General technical requirements. Test methods

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 53412-2009: Woodruff keyseat cutters. Specifications

GOST R 53443-2009: Motor vehicles. Piston pins of automobile engines. General technical requirements and methods of tests

GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests

GOST R 53557-2009: Motor vehicles. Connecting rod bolts. General technical requirements and methods of tests

GOST R 53628-2009: Metal roller bearing parts for bridge building. Specifications

GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications

GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods

GOST R 53810-2010: Automobile engines. Valves. Technical requirements and test methods

GOST R 53812-2010: Automobile engines. Valve tappets. Technical requirements and test methods

GOST R 53813-2010: Automobile engines. Connecting rods. Technical requirements and test methods

GOST R 53817-2010: Vehicles. Telescopic single acting hydraulic cylinders. Technical requirements and test methods

GOST R 53819-2010: Vehicles. Fastenings wheels. Technical requirements and test methods

GOST R 53926-2010: End milling cutters with shell-type inserted blades for woodcutting. General specifications

GOST R 53927-2010: Shell-type inserted blade circular cutterbloks for woodcutting. General specifications

GOST R 53932-2010: Tube billet. General specifications

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 54488-2011: Adjustable wrenches. Specifications

GOST R 54749-2011: Coupler and automatic coupler device of railway rolling stock. Technical requirements and acceptance rules

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 55819-2013: Brake block holder and key for railway rolling stock. General specifications

GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification

GOST R 56727-2015: Self-stressing cements. Specifications

GOST R 58171-2018: Services in railway transport. Requirements for passenger service at railway stations

GOST R ISO 5287-2017: Drive V-belts of narrow cross-sections for the automobiles. Fatigue test

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

Manual to SN 527-80: Manual to SN 527-80. On the strength design of the technological steel pipelines at Py up to 10 Mpa

MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies

MI 1069-85: State system for ensuring uniformity of measurements. Methodical instructions. Machine-oriented data recording system for metals (alloys)

MR 2.6.1.0064-12: Radiation monitoring of drinking water using radiochemical analysis methods

MU 4296/755-00.006: R-560 non-destructive ultrasonic testing of the rotor shaft

MU 4296/755-00.014: Method for non-destructive ultrasound testing of wellhead armature AUSHGN-UHL

MU 4296/755-00.017: Method of non-destructive ultrasonic testing of the compressor K5M

MU 4296/755-00.023: Method of nondestructive testing of the worm box of the APR-2VB submachine gun

MU 6096-00.002: R-700 rotor shaft non-destructive testing procedure

MU 6096-00.003: R-950 rotor shaft non-destructive testing method

NB ZhT TM 02-98: The safety standards for rail transport. Metal products for railway rolling stock. Standards of safety.

NB ZhT TsT-TsV-TsL 012-2003: Axle rolling bearings for rolling stock of railways. Safety standards

NB ZhT TsV-TsL 014-2003: Axle rolling bearings for rolling stock of railways. Safety standards

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)

ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes

ON 025 314-68: Trucks and buses. Friction clutches hydromechanical gears. Types and basic parameters

OST 108.004.109-80: Welded joint seams of CHP plant power equipment. Magnetic-particle control method.

OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)

OST 108.020.109-82: Steam Stationary Turbines. Rotors and discs static strength calculation.

OST 108.021.04-78: Steam Stationary Turbines. Welded diaphragms. Guide vanes. General specifications.

OST 108.343.01-80: Clips of supports of CHP plant and nuclear thermal power plant pipelines. Design and dimensions.

OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.

OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.

OST 153-34.0-969-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). General technical requirements

OST 153-34.0-969-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. General technical requirements.

OST 153-34.0-984-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). General technical requirements

OST 153-34.0-984-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. General technical requirements.

OST 16.3.949.003-75: Electric welding equipment. Automatic and semi-automatic arc welding. The rollers giving. Design, dimensions and specifications

OST 2 R31-5-89: Metal cutting machines. Ball screw gears. Technical conditions

OST 2 Р31-5-89: Ball screw. Specifications.

OST 24.013.20-90: Forged steel rollers for cold rolling of metals. Specifications.

OST 24.090.39-78: Shell stacker cranes. Specifications.

OST 24.090.39-83: Shell stacker cranes. General specifications.

OST 24.125.106-01: CHP and NTPP pipeline suspensions. Connecting joint sleeves Design and dimensions.

OST 24.125.113-01: CHP and NTPP pipeline suspensions. Clamp units for horizontal pipelines. Design and dimensions.

OST 24.125.127-01: CHP and NTPP pipeline suspensions. Clamp units for vertical pipelines. Design and dimensions.

OST 24.125.170-01: Details and prefabricated units of supports, hangers, ties for lens compensators and drives for remote control of pipe fittings in thermal and nuclear power plants. General Specifications.

OST 24.149.03-89: Cogwheels for traction rolling stock of mainline railways. Technical conditions.

OST 24.191.08-81: Hook crane suspensions. Design and dimensions.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 24.940.01-90: Welded steel structures. General technical requirements.

OST 24.940.09-74: Welded joint seams. Main types and design elements.

OST 26.260.460-99: Lobes, locks and pads. Design, dimensions and general technical requirements.

OST 26.260.462-99: Devices for installation of instruments measuring the temperature for PN from 0.6 to 16 MPa. Types, design, dimensions and general technical requirements

OST 26.260.472-2000: devices for installation of pressure gauges and pressure selection. General technical requirements.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.

OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-01-342-71: Parts of pipelines. Viewing portholes with flat glass. Design and dimensions

OST 26-01-48-82: Assembling units and pipeline details. Flanged connections with bilateral cap or ring. Design and dimensions.

OST 26-01-49-82: Assembling units and pipeline details for working pressure of 32 MPa (320 kgf/cm2). General specifications.

OST 26-02-1496-76: Air, gas and liquid medium vessels and devices. Technical specifications.

OST 26-02-2053-79: Adapter and hatches made of double-layer steel. Technical requirements .

OST 26-02-2060-79: Underground horizontal drainage tanks. Specifications

OST 26-02-535-78: Piston oil pumps with electric drive and regulated supply

OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.

OST 26-04-1250-75: Ranks of pipes for pipelines.

OST 26-07-1232-87: General engineering pipeline fittings. Running thread pairs. Main dimensions. Technical requirements.

OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-07-262-77: Studs, bolts, screws, nuts for piping fittings. General technical requirements (restriction as per GOST 20700-75, GOST 1759-70, GOST 18126-72).

OST 26-11-04-84: Steel vessels and devices. Allowable stress.

OST 26-18-3-86: liquid mesh filter for piping. Design, parameters and dimensions.

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 26-2015-83: Hinge and tilt-up Devices for manhole covers of welded steel of vessels and apparatuses. Technical requirements .

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.

OST 34-10-723-93: Assembling units and station pipeline hang details, Working pressure<2,2 MPa of CHP plant, nuclear thermal power plant and dust-and-gas windpipes of CHP plant. General technical requirements.

OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-42-836-86: Flat Flanges for pipes of TPP and NPP. Design and dimensions.

OST 35-02-72: High-strength bolts, nuts and washers for them.

OST 35-09-86: Hoisting machinery and equipment. General specifications.

OST 35-22-83: Pipe culverts made of corrugated metal intended for railroad and auto road. Specifications.

OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.

OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-62-81: Hoisting equipment. General technical requirements.

OST 37.001.041-72: Bolts of pivot leaf springs of automobile rolling stock. Types and main sizes

OST 3-98-80: Constructional and spring refining steel. Technical requirements.

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations

PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PVKM 79: Instructions for the design of railway temporary and short-term bridges and pipes

R 001-98: Guide to the design of steel structures of objects of large-volume blast furnaces

R 50-112-89: Recommendations. Hardening coatings used in the manufacture and restoration of textile equipment parts and machines for the processing of chemical fibers

R 51-31323949-58-2000: Guidelines for the Application of Steel Pipe in the Oil and Gas Industry

RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-34.1-39.603-99: Fittings repair manual of high parameters.

RD 153-39.1-36-99: Recommendations for the unification of oil pumps for oil refineries

RD 24.030.142-88: Methodological instructions. Selection of steel products for construction of stationary boilers.

RD 24.031.15-88: Methodological instructions. Designing stationary boilers steelworks.

RD 24.942.02-90: Electroslag welding of chemical and petroequipment from low-alloyed and heat-resistant steels

RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.

RD 26-01-28-86: Pipelines and high-pressure apparatus for ammonia and methanol production. Steel grades. Terms of use

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 26-07-264-86: Anticorrosive weld deposit of sealing surfaces of pipeline fittings.

RD 26-8-87: Welding of cold-resistant low-alloyed steels used in structures operated at low temperatures

RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 31.46.07-87: Rope grabs for bulk cargo. Typical strength calculations. Technique

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 34.21.142: Guidelines for the Design of Steel Pipelines for Hydraulic Structures

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm

RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-013-90: Instructions for pipe drill usage.

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD 50-460-84: Guidelines. Ensuring the durability of products. Method for experimental evaluation of plasticity of the surface layers of machine parts

RD 50-534-85: Guidelines. System of standards for tooling. Adaptations to metal-cutting machine tools. Information retrieval system of choice. Information array of equipped technological operations. Rules of formation

RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements

RD RTM 26-366-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Spectral methods of steel analysis

RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource

RDMU 80-76: Guidelines for designing sheet metal stamping for separation operations

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RST RSFSR 91-78: Percussion musical instruments. General technical requirements

RTM 108.020.33-86: Labyrinth packings of stationary steam and gas turbines and compressors. Design and calculation

RTM 24.020.33-75: Stationary steam and gas turbines, compressors. Labyrinth seals, type selection and leakage calculation

RTM 24.090.33-77: Lift-and-carry machines. Worm gears. Strength calculation methods

RTM 26-07-141-73: Details of pipe valves. Heat treatment of billets made of carbon and alloyed structural steels.

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SN 482-76: Instructions for the design of concrete and reinforced concrete structures designed to work in conditions of exposure to elevated and high temperatures

SNiP 2.03.04-84: Concrete and reinforced concrete structures designed to operate under elevated and high temperatures

SNiP 3.06.04-91: Bridges and pipes

SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures

SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures

SP 281.1325800.2016: Boiler rooms integrated in building by general power to 360 kW. Rules of planning and device

SP 41-104-2000: Design of independent heat supply sources

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

SP 46.13330.2012: Bridges and pipes

SP 52-110-2009: Concrete and reinforced concrete structures subjected to technological high and high temperatures

ST TsKBA 002-2003: Pipe fittings. Latches. The method of force calculation

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 005.2-2004: Pipe fittings. Metals used in the valve industry. Part 2. Reference data on the properties of materials

ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 026-2005: Pipe fittings. Heat treatment of blanks from carbon and alloyed structural steels. Typical process

ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments

ST TsKBA 068-2008: Pipe fittings. Shut-off valves with metal-to-metal seal. Technical requirements

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC

TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions

TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision

TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions

TU 14-3R-251-2007: Seamless steel pipes for chemical and petrochemical plants with conditional pressure Py = 19.6 - 98 MPa (200 - 1000 kgf/cm2)

TU 14-3R-50-2001: Steel pipes, seamless, hot-rolled, thick-walled, of cast ingot

TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK

TU 26-02-1158-95: Horizontal air coolers

TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair

TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases

VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts

VSN 31-68: Technical instructions for the design and construction of prefabricated prefabricated reinforced concrete slabs for aerodromes of classes B and C GA

VSN 506-88: Design and construction of ground anchors

Zh3-139: Recommendations for the design of pipelines for water treatment plants. Assortments of pipeline parts. Construction and laying of pipelines

GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications

L8-138.000 - L8-200.000: Supports and suspensions of fixed pipelines with the parameters of the medium RR <= 2.2 MPa (22 kgf / cm2) and ter. <= 425 degrees Celsius of TPP, nuclear power plant and dust and gas pipelines of TPP from unified parts. Part 2. Supports movable and fixed

Manual for SNiP 2.03.04-84: A guide for the design of concrete and reinforced concrete structures designed to work in conditions of exposure to elevated and high temperatures

Manual for SNiP II-37-76: Manual for the use of steel pipes for the construction of gas supply systems

NPB 173-98*: Helmets are fire. General technical requirements. Test methods

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PI 249-2000: Riveting of metal structures. application

R 4.054.004-89: Details from alloys of ferrous and non-ferrous metals. Thermal and chemical-thermal treatment. Typical Processes

R 4.054.103-89: Instrument parts are precision metal. Stabilization of sizes by heat treatment. Typical Processes

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 31.44.06-89: Low loader semi-trailers. Repair Specifications

RD 31.48.01.01-81: Spare parts for gantry cranes of foreign construction. Assembly units and parts. Technical requirements

RD 31.55.02.02-80: Spare parts of ship auxiliary mechanisms of foreign construction. Centrifugal pumps. Technical requirements

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems

ST SSFZhT TsT TsL TsV-137-2002: Rolling stock of mainline railways. Axle box rolling bearings. Standard testing method.

ST SSFZhT TsT-121-2001: Cylindrical cogged wheels of traction gearing of traction rolling stock of main railway lines. Standard testing method

TU 14-159-1128-2008: Steel and seamless hot-deformed cold-resistant pipes for gas pipelines of gas-lift systems and arrangement of gas fields

TU 14-3R-51-2001: Seamless steel pipes, hot-rolled, thick-walled for mechanical engineering

TU 24-09.411-82: Special electric bridge cranes

TU 3615-018-00217320-2006: Spherical tanks. Technical specifications

TU 3680-001-04698606-04: Pipe Support

TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications

VSN 286-90: Guidelines for the calculation of reinforced concrete chimneys

Customers Who Viewed This Item Also Viewed:

Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
Locomotive and motor rolling stock. Requirements of fire safety
Language: English
Price: $305.50
Unified system of design documentation. Operational documents
Language: English
Price: $610.13
Unified system of design documentation. Rules for the implementation of operational documents
Language: English
Price: $752.72
System of building design document. Pipelines. Symbols for presentation
Language: English
Price: $10.89
Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
Language: English
Price: $267.30
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.20
Machines for the pulp and paper industry
Language: English
Price: $207.58
Unified system for design documentation. Rules for making exploitative documents
Language: English
Price: $183.15
Electrical insulation system. Thermal evalution and classification
Language: English
Price: $54.45
Fire hazard of textiles. Decorative textiles. Flammability test method and classification
Language: English
Price: $49.50
Loads and impacts
Language: English
Price: $338.40
Direct-acting safety valves. General specifications
Language: English
Price: $346.50
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Seamless cold-deformed pipes from alloys based on titanium. Specifications
Language: English
Price: $147.44
Flame arrestors and spark arrestors. General technical requirements. Test methods
Language: English
Price: $128.70
Production conditions analysis for product attestation
Language: English
Price: $285.18
Vibration. Technological equipment of pulp and paper production. Protection methods and means
Language: English
Price: $299.73
Steel. Methods of test and estimation of macrostructure
Language: English
Price: $148.50
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $148.50

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!