imgalt

GOST 14782-86

ГОСТ 14782-86

Nondestructive testing. Welded joints. Ultrasonic methods

Контроль неразрушающий Соединения сварные Методы ультразвуковые

Status: Applied in the EAEU

The standard establishes methods for ultrasonic testing of butt, corner, lap and tee joints made by arc, electroslag, gas, gas-press, electron-beam and butt-fusion welding in welded structures made of metals and alloys to detect cracks, poor penetration, pores, non-metallic and metal inclusions. The standard does not establish methods for ultrasonic surfacing control.

Стандарт устанавливает методы ультразвукового контроля стыковых, угловых, нахлесточных и тавровых соединений, выполненных дуговой, электрошлаковой, газовой, газопрессовой, электронно-лучевой и стыковой сваркой оплавлением в сварных конструкциях из металлов и сплавов для выявления трещин, непроваров, пор, неметаллических и металлических включений. Стандарт не устанавливает методы ультразвукового контроля наплавки.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 12/17/1986

SKU: RUSS19323

Price: $302.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Defects »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 002/2011 TR TS. On safety of high-speed rail » Regulations and standards (to TR CU 002/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » One-piece connections (welding, riveting, soldering, etc.) »


As a Replacement Of:

GOST 14782-76: Non-destructive check. Welded seams. Ultrasonic control methods

GOST 22368-77: Non-destructive test. Classification of the defectiveness of butt welds based on the results of ultrasonic testing

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 17622-72: Industrial organic plastic. Specifications

GOST 18576-85: Non-destructive testing. Railway rails. Ultrasonic control methods

GOST 18576-96: Non-destructive testing. Railway rails. Ultrasonic testing methods

GOST 23829-85: Acoustical non-destructive testing. Terms and definitions

GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 26266-90: Ultrasonic transducers

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 8.315-97: Standard samples for composition and properties of substances and materials

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

Order 970: Administrative Regulations on rendering by the Federal Agency on Technical Regulation and Metrology of the state service on type approval of certified reference materials or type of measuring instruments

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

The Document is Referenced By:

Decision 162: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulations of the Eurasian Economic Union "On requirements for main pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020), and the list of international and regional (interstate) standards, and in their absence - national (state) standards that contain rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulation of the Eurasian Economic Union "On requirements for pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020) and conformity assessment of technical regulation objects

Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and

DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants

GOST 10037-83: Autoclaves for building industry

GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications

GOST 11004-84: Principal ventilation mine blowers

GOST 12367-85: Tube mills of grinding units. General technical specifications

GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 14116-85: Vessels attaching rigs. Election lugs. Technical requirements

GOST 1561-75: Air reservoirs for railway car automatic brakes. Specifications

GOST 17032-2022: Horizontal steel tanks for petroleum products. Specifications

GOST 17441-84: Electrical contact connections. Acceptance and methods of tests

GOST 18576-96: Non-destructive testing. Railway rails. Ultrasonic testing methods

GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing

GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods

GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 23118-2012: Building steel structures. General specifications

GOST 23118-99: Steel construction structures General Technical Specifications

GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export

GOST 23702-90: Non-destructive testing. Ultrasonic transducers. Test methods

GOST 23858-2019: Welded butt joints of reinforced concrete structures. Ultrasonic methods of quality control. Acceptance rules

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 26126-84: Non-destructive testing of soldered joints ultrasonic quality control

GOST 30243.1-97: Open hopper wagons of 1520 mm gauge for the loose materials. General specifications

GOST 30767-2002: Gas lift well use equipment. Safety requirements and test methods

GOST 30768-2001: Control head oil field equipment. Test methods

GOST 30776-2002: Oil field mobile pumping units. General specifications

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31594-2012: Machines and tractors for forestry. Test methods of safety requirements

GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing

GOST 31831-2012: Centrifugal dust collectors. Safety requirement and methods of testing

GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods

GOST 31837-2012: Abcorptive gas purifiers. Safety requirements and test methods

GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST 3242-79: Welded joints

GOST 32503-2013: Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment. General technical requirements

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements

GOST 32601-2022: Centrifugal pumps for oil, petrochemical and gas industry. General technical requirements

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 33005-2014: Oil and gas industry. Drilling and production equipment. Connections of marine drilling risers. General specifications

GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications

GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34070-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Technical requirements

GOST 34524-2019: Rails are railway. Non-destructive testing in operating conditions. General requirements

GOST 34650-2020: Solid-rolled wheels and wheelset tires for railway rolling stock. Non-destructive testing methods

GOST 34656-2020: Axles of wheelsets of railway rolling stock. Non-destructive testing methods

GOST 34657-2020: Cast and rolled wheel centers for railway rolling stock. Non-destructive testing methods

GOST 34670-2020: Gas distribution systems. Gas reduction points. Basic Provisions

GOST 34991-2023: Welded joints in steel structures of railway rolling stock. Methods of ultrasonic control

GOST 7370-2015: Railway frogs. Specifications

GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 51562-2000: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

GOST R 51707-2001: Electrostatic precipitators. Safety requirement and methods of testing

GOST R 51708-2001: Centrifugal dust collectors. Safety requirement and methods of testing

GOST R 51862-2002: Machines and tractors for forestry. Test methods of safety requirements

GOST R 51863-2002: Machines and tractors for forestry. Safety requirements

GOST R 51878-2002: Adsorptive gas cleaners. Safety requirements and test methods

GOST R 52203-2004: Tubing and coupling. Specifications

GOST R 52220-2004: Monorail transport system electrical rolling stock. General safety requirements

GOST R 52232-2004: Light rail cars. General specifications

GOST R 52264-2004: Pressure diving chambers. General specifications

GOST R 52400-2005: Air reservoirs for railway brakes. General specifications

GOST R 52445-2005: Absorptive gas purifiers. Safety requirements and test methods

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 54907-2012: Trunk pipelines for oil and oil products transportation. Technical diagnosis. Basic principles

GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST R 55142-2012: Testing of welded joints of thermoplastic sheets and pipes. Test methods-Requirements

GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST R 55728-2013: Mining equipment. Underground hydromonitors. Safety requirements and test methods

GOST R 55809-2013: Non-destructive testing. Ultrasonic flaw detectors. Methods of measuring the main parameters

GOST R 55821-2013: Bogies of passenger cars on locomotive traction. Specifications

GOST R 55850-2013: Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 2. Surface-drive systems. General technical requirements

GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel

I3-94: Instructions for diagnosing the technical condition of tanks of liquefied gas installations

ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries

ITNJe-93: Instruction on technical supervision and operation of pressure vessels not covered by the Rules of Gosgortechnadzor

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities

Manual for SNiP 3.05.02-88: Manual on technology and organization of the construction of pipelines for gas supply systems in rural areas of the Non-chernozem zone of the RSFSR

Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction

MDS 12-31.2007: Guidelines for technical certification of removable load-handling devices

MDS 53-1.2001: Recommended Practice for Installation of Steel Structural Elements

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

MSN 42-01-2011: Gas distribution systems

MT-RTS-K 01-94: Methods of ultrasonic testing of welded joints of boiler units, pipelines and pressure vessels by flaw detector UD2-12 (2.1)

MU 0397-00.001: Method of nondestructive testing of parts of the mud pump U8-6MA2

MU 0397-00.002: Non-Destructive Testing Methodology for VE-50 and VP-50 Swivels

MU 0397-00.003: Method of non-destructive testing of turbodrill parts

MU 0397-00.004: Methods of conducting non-destructive testing of parts of the boiler installation PPUA-1600/100

MU 0397-00.005: Methods of conducting non-destructive testing of parts of KTGU type keys

MU 0397-00.006: Non-Destructive Testing Technique for the A-50U Tack Block

MU 0397-00.007: Methods of non-destructive ultrasonic testing of elevators ETA, EHL, KM

MU 0397-00.008: Method of non-destructive testing of parts for the heating device of the ADPM-12 unit/150-У1

MU 0397-00.009: Method of non-destructive testing of parts of centrifugal pumps such as CNS 38-44 ... 220, CNS 60-198, CNS 105-98, CNS 180-476 ... 686, CNS 300-120 ... 600, CNS 500-19002

MU 0898-00.003: Method of non-destructive ultrasonic testing of the details of the installation of the manifold unit

MU 1198-00.001: Method for non-destructive testing of ultrasonic testing of LBT drill pipes

MU 1198-00.002: Methods of non-destructive ultrasonic testing of the weld zone of drill pipes of the TBPV type

MU 1198-00.003: Method of non-destructive ultrasonic testing of the crown block UKB-6-200

MU 1198-00.006: Method of conducting non-destructive testing of the pulley block

MU 1198-00.008: Method for non-destructive testing of brake bands of drawworks and winches of units for underground and workover of wells

MU 1198-00.009: UTBC-5-170 hook block non-destructive testing methodology

MU 1198-00.011: PBC-4 key non-destructive testing procedure

MU 1198-00.012: Methods of conducting non-destructive testing of HC-250 swivels

MU 1798-00.001: Methods of conducting non-destructive testing of the universal machine key UMK-1C

MU 1798-00.003: Methods of conducting non-destructive ultrasonic inspection of parts of the column head

MU 2002-2002: Methodology for examining the technical condition of cabinet elevators for drill and casing KM type and cast elevators for casing EN type to determine the possibility of their further operation

MU 4296/755-00.006: R-560 non-destructive ultrasonic testing of the rotor shaft

MU 4296/755-00.011: Method of conducting non-destructive ultrasonic testing of gearbox KPC-700

MU 4296/755-00.014: Method for non-destructive ultrasound testing of wellhead armature AUSHGN-UHL

MU 4296/755-00.017: Method of non-destructive ultrasonic testing of the compressor K5M

MU 4296/755-00.021: Methods for conducting non-destructive ultrasonic testing of a tube block furnace PTB-10

MU 4296/755-00.023: Method of nondestructive testing of the worm box of the APR-2VB submachine gun

MU 4296/755-00.025: Methods of conducting non-destructive testing of drill pipe UBT

MU 6096-00.002: R-700 rotor shaft non-destructive testing procedure

MU 6096-00.003: R-950 rotor shaft non-destructive testing method

MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways

OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.004.108-80: Welded connections and depositing of nuclear power plants equipment. Ultrasound testing methods

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 108.030.30-79: Stationary structural steel boilers. General specifications.

OST 108.958.03-96: Steel forgings for power equipment. Ultrasound Testing Technique

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.

OST 26-2044-83: Butt and corner welded joint seams of pressure-operated vessels and devices. Ultrasonic control method.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 32.100-87: Ultrasonic inspection of welds of welded joints of bridges, locomotives and cars

OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements

OST 36-26-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (≈ 25 kg/cm2). General technical requirements.

OST 36-49-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Technical conditions.

OST 36-58-81: Steel building structures. Welding. Basic requirements.

OST 36-60-81: Welding at installation of steel building constructions. Main provisions.

OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.

OST 95 10575-2002: Equipment and pipelines of separation plants. Weld joints and deposits. Control rules

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-110-96: Safety regulations on pressurized storage of liquefied petroleum gas and highly inflammable liquids

PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding

PB 03-278-99: Process rules for qualification tests of welders and welding production specialists

PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 10-14-92: Codes for installation and safe operation of lifting cranes

PB 10-157-97: Installation and Safe Operation Requirements for Pipe-Laying Machine Safety

PB 10-256-98: Regulations on design and safe operation of hoists (derricks)

PB 10-257-98: Rules for the installation and safe operation of crane manipulators

PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.

PB 10-77-94: Installation and Safe Operation Requirements for Escalators

PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys

PNAE G-10-032-92: Requirements for welding seal element control of nuclear plant confining safety systems

PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules

PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)

PNAE G-7-023-90: Equipment and pipelines of nuclear power units. Welded joints of aluminium alloys. Control rules

PNAE G-7-030-91: Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part II. Weld examination

PNAE G-7-032-91: Uniform control methods for basic materials (semi-finished materials), welded joints and weldings on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part IV. Examination of welded joints of austenitic steels

R Gazprom: Temporary technical requirements for equipment for opening pipelines

RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 03-495-02: Procedures for the qualification test of welders and welding work specialists

RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair

RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.

RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines

RD 10-197-98: Guidelines for Operating Condition Assessment of Bolted and Riveted Joints of Hoisting Cranes

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 10-96-95: Procedural Guidelines for Preparing Data Sheets (in Duplicate) for Steam and Hot Water Boilers

RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines

RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators

RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines

RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks

RD 153-112TNP-027-97: Guidelines for Cold-Weather Overhaul of Petroleum Product Pipelines 100-720 mm in Diameter

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-34.1-17.308-2001: Ultrasonic testing of welded joints on the conical seating washers of boiler units down comers.

RD 153-34.1-17.462-00: Procedural Guidelines Assessment of Serviceability of Steam Turbine Blades in the Process of Manufacturing, Operation, and Repair

RD 153-34.1-21.530-99: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 2: Metal Structures

RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.

RD 153-39.4-056-00: Main crude pipeline. Operations rules.

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 2082-18-2005: Technical diagnosis and design life prolongation program for cryogenic tank.

RD 22-205-88: Ultrasonic flaw detection of welded joints of lifting machines. Main provisions.

RD 22-207-88: Lifting machines. General requirements and production standards

RD 22-28-36-01: Lifting cranes. Typical program and test procedure. Standard testing programs and procedures.

RD 22-326-97: Self-propelled jib cranes and loader cranes. Overhaul. General technical conditions

RD 24.020.11-93: Welded joints of stationary steam, gas and hydraulic turbines. Testing rules and quality evaluation standards.

RD 24.090.97-98: Materials handling equipment. Requirements for construction, repair and reconstruction of steel structures of cranes.

RD 24.200.13-90: Seamless steel pipes. Methodic of uniformity incoming ultrasonic control.

RD 24.942.02-90: Electroslag welding of chemical and petroequipment from low-alloyed and heat-resistant steels

RD 26.260.004-91: Procedural Guidelines. Prediction of Remaining Service Life of Equipment According to the Change in its Operational Parameters During Operation

RD 26.260.007-92: Pipelines and pipeline parts for pressure of 250 MPa (2500 kgf/cm2) of polyethylene production. Basic technical requirements, certification, operation and repair

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

RD 26.260.12-99: Service life extension of liquid carbon dioxide vessels. Instructional guidelines.

RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities

RD 26.260.225-2001: Bodies of cylindrical vessels and devices. Technology, quality assurance

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 26-11-87: Instructions on acoustic methods for monitoring the structure and mechanical characteristics of gray and high-strength cast irons

RD 2-97: Regulations on the system for the technical diagnosis of autoclaves in the production of building materials

RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997

RD 31.35.11-89: Instructions for engineering surveys of seaport hydraulic structures

RD 32.144-2000: Acceptance nondestructive testing. Solid wheels, tires and axes of wheel sets for rolling stock. Technical requirements.

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 34.17.202: Instructions for automatic submerged-arc welding of low-carbon and low-alloy steel of 20 to 60 mm thickness using granulated filler metal

RD 34.17.302-97: Steam and hot water boilers, steam and hot-water-pipelines. Welding. General requirements. Quality control. Ultrasonic control. Main principles.

RD 34.17.307-89: Procedural Guidelines for Ultrasonic Flaw Detection of Corner Welded Joints of Couplings to Manifold Bases of Steam Boilers Thermal at Electric Power Generating Stations

RD 34.17.308-90: Method for Ultrasonic Inspection of Welded Joints on Tapered Spacing Rings of Boiler Water Discharge Pipelines

RD 34.17.310-96: Welding, Heat Treatment, and Inspection During In-Service Repair of Welded Joints in Boiler Tubing Systems and Steam Lines

RD 34.17.311-96: Procedural Guidelines for Ultrasonic Inspection of Welded Joints in Centrifugally-Cast Pipes Made from Steel 15Kh1M1F and 15 GS

RD 34.17.401-95: Instructions for scope and procedure of metal input control of power equipment with pressure of 9 MPa and more, before its commissioning.

RD 34.17.403-96: Guidelines for Ultrasonic Flaw Detection of Metal of Steam Supercooler Chambers at Locations Where Water is Injected

RD 34.17.405-96: Procedural Guidelines for Ultrasonic Inspection of Thin-Wall Components of Steam Superheaters and Steam Lines

RD 34.17.415-96: Instructions for ultrasonic inspection of power equipment fasteners.

RD 34.17.417: Ordinance on Assessment of Service Life and Procedure for Inspection and Replacement of Bends in Unheated Pipes of Boilers with Operating Pressure of 10 and 14 MPa

RD 34.17.418: Instructions for crack detection of pipeline bends made of pearlitic steel.

RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements

RD 34.17.435-95: Methodological instructions. Technical diagnostics of boilers with working pressure up to 4.0 MPa inclusive.

RD 34.17.436-92: Procedural Guidelines. Individual Inspection of Metal of Cast Housing Components for Steam Turbines

RD 34.17.440-96: Procedural Guidelines for Assessment of Individual Service Life of Steam Turbines and Prolongation of Their Operational Life Beyond the Individual Service Life of Steam Turbines and Prolonging Their Operational Life Beyond The Equipment Service Life

RD 34.17.450-98: Procedural Guidelines for Ultrasonic Testing Without Removing Blades from Disk Hub in Areas of Upper Concentrators of T-Shape Slot

RD 34.30.507-92: Procedural Guidelines for the Prevention of Corrosion Damage to Disk and Blade Apparatus of Steam Turbines in Phase Transition Zone

RD 34.39.501: Model Guidelines for Operation, Repair, and Inspection of System Water Station Piping Systems

RD 34.40.601-97: Procedural Guidelines for Inspection of Hot Water Storage Tanks

RD 34-10.030-89: Rules for quality control of welded joints of pipelines of nuclear power plants

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks

RD 50-407-83: Guidelines. The main parameters of inclined converters for ultrasonic testing of welded joints at a frequency of 1.25-5 MHz with prism angles of 30-55 degrees. Measurement Technique

RD 51-553-94: Instructions for technical certification of gas accumulators GSS-1-1-10,0-25U-001 during the operation of gas filling stations of gas compressor stations (AGNKS)

RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants

RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications

RD OP.42-001-85: Main provisions for welding and control of the NPP tanks (reservoirs)

RD ROSEK 02-008-96: Passenger, hospital and freight elevators. Nondestructive control. Main provisions

RD ROSEK 04-010-98: Guidelines for the technical diagnosis and extension of the service life of pressure chambers

RD ROSEK-001-96: Hoisting machines. Metal structures. Ultrasonic control. Key Points

RD ROSEK-006-97: Hoisting machines. Metal structures. Ultrasonic thickness gauging. Key Points

RD RosJeK 05-014-98: Guidelines for expert examination of pipelines of steam and hot water of category IV, supervised by the Gosgortekhnadzor of Russia

RD RosJeK 10-KM-03: Rules for the design, construction and manufacture of hoisting cranes

RD RosJeK 10-KR-01: Rules for the design, construction and manufacture of hoisting cranes

RD RosJeK 10-PV-02: Rules for the design, construction and manufacture of hoists (towers)

RD RTM 26-07-246-80: Design, manufacturing and control regulations for steel pipeline fittings welded joints.

RDI 26-15-80: Instructions for making inner vessels of isothermal tanks for liquefied carbon dioxide

RDI 38.18.016-94: Instructions for ultrasonic control of welded joints for technological equipment.

Resolution: Rules for the design and safe operation of steam and hot water boilers

RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SNiP 3.05.03-85: Heat networks

SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing

SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)

SP 105-34-96: Code of regulations on construction of trunk gas pipelines. Welding works and quality control of welding joints

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation

SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines

SP 42-105-99: Quality control of welded joints of polyethylene gas pipelines

SP 46.13330.2012: Bridges and pipes

SP 53-101-98: Manufacturing and quality control of steel structures for construction

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 86.13330.2014: Main (Trunk) pipelines

ST RK 1358-2005: Pressure vessels. Requirements for welding steels

ST RK 1450-2005: Non-destructive testing. Weld joints of railway bridges, locomotives and cars. Ultrasonic methods

ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

STO: Thermal power plants. Methods of assessing the condition of the main equipment

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)

TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions

TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions

TU 34-38-20092-94: High pressure surface heaters for steam turbine regeneration systems. Technical conditions for major repairs

TU 34-38-20184-94: Stationary steam boilers. Intra drum separating devices. Technical conditions for major repairs

TU 34-38-20195-94: Fuel oil heaters of PM and PMR types. Technical conditions for major repairs

TU 34-38-20196-94: Steam heaters, water-water heat exchangers. Technical conditions for major repairs

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

VRD 39-1.10-049-2001: Правила распространяются на эксплуатацию, реконструкцию и ремонт магистральных, межпромысловых и промысловых конденсатопродуктопроводов и отражают специфику транспорта стабильеого, нестабильного, деэтанизированного конденсата, широкой фракции легких углев

VSN 005-88: Construction of field steel pipelines Technology and arrangement

VSN 012-88: Main pipeline and flowline construction. Quality control and commissioning of works

VSN 171-84: Instructions on welding technology and quality control of welded joints of field pipelines

VSP 34-01-03 MO RF: Guidelines for the calculation and design of metal tanks and pipelines in the fuel depots of the Ministry of Defense of the Russian Federation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!