GOST 16336-77
ГОСТ 16336-77
|
|
Polyethylene compositions for cable industry. Specifications
Композиции полиэтилена для кабельной промышленности. Технические условия
Status: Restored in the Russian Federation for individual industries. By order of the Federal Agency for Technical Regulation and Metrology dated 01.03.2016 No. 101-st, it was restored on the territory of the Russian Federation only in relation to products delivered under the State Defense Order; IUS 6-2016
The standard applies to compositions based on high pressure polyethylene (low density) and low pressure (high density) with stabilizers and other additives. Polyethylene compositions are intended for the imposition of insulation, shells and protective covers of wires and cables by extrusion.
Стандарт распространяется на композиции на основе полиэтилена высокого давления (низкой плотности) и низкого давления (высокой плотности) со стабилизаторами и другими добавками. Композиции полиэтилена предназначаются для наложения изоляции, оболочек и защитных покровов проводов и кабелей методом экструзии.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
11/25/1977
SKU: RUSS19326
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.080 Plastics »
83.080.20 Thermoplastic materials »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.080 Plastics »
83.080.20 Thermoplastic materials »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L27 Artificial resins and fiber, plastics and plasticizers »
The Document is Replaced With:
GOST 16336-2013: Polyethylene compositions for cable industry. Specifications
As a Replacement Of:
GOST 16336-70: Polyethylene compositions for cable industry
The Document References:
GOST 11262-80: Plastics. Tensile strength test method.
GOST 11645-73: Plastics method of determination of melt flow index for thermoplastics
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12019-66: Plastics. Preparation of test specimens from thermoplasts. General requirements
GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 13518-68: Plastics. Method for determination of environmental stress-cracking resistance of polyethylene
GOST 14041-91: Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products of elevated temperatures. Congo red method
GOST 14192-96: Cargo marking
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 15973-82: Plastics. Methods for determination of ash
GOST 16782-92: Plastics. Determination of the brittleness temperature by impact
GOST 17711-93: Cast copper-zink alloys (brass). Grades
GOST 17811-78: Polyethylene bags for chemical products. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 21029-75: Aluminum barrels for chemical products
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 2226-88: Paper bags
GOST 22372-77: Dielectric materials. Methods of determination of permittivity and power factor with in a frequency range of 100 to 5·10 in 6 degree Hz
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25706-83: Magnifiers
GOST 26359-84: Polyethylene. Method for determination of volatile matters content
GOST 26380-84: Special groupage containers. Types, basic parameters and dimensions
GOST 26393-84: Polyethylene. Method for determination of extractable substances content by diethyl ether
GOST 618-73: Aluminum foil for technical purposes. Specifications
GOST 6433.1-71: Solid electrical insulating materials. Environmental conditions at preparation of samples and testing
GOST 6433.3-71: Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage
GOST 7730-89: Cellulose film
GOST 8.358-79: State system for ensuring the uniformity of measurements. Method of making measurements of relative permittivity and dielectric loss tangent in the frequency range of 0,2 to 1 GHz
GOST 8433-81: Auxiliary substances OП-7 and OП-10. Specifications
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
GOST 982-80: Transformer oils
The Document is Referenced By:
GOST 10971-78: Main coaxial cables with type 2,6/9,4 and 2,6/9,5 pairs. Specifications
GOST 11092-82: Entrance and connecting communication cables
GOST 11326.0-78: Radio-frequency cables
GOST 1508-78: Control rubber and plastic-insulated cables. Specifications
GOST 15125-92: Styroflex, high-frequency, balanced, communication cables
GOST 16092-78: Suspended multiconductor flexible cables
GOST 16442-80: Plastics insulated power cables. Specifications
GOST 17246-83: Cables with three coaxial pairs combined. Specification
GOST 17301-79: Compact cables with plastic insulation and sheath. Specification
GOST 17515-72: Hookup plastic insulated wires
GOST 18404.2-73: Ре insulated rubber sheathed control cables
GOST 18404.3-73: Polyethylene insulated pvc sheathed control cables
GOST 20402-75: Stuffed boiled sausages
GOST 2190-77: Field blasting cable
GOST 22498-88: Local telephone cables with polyethylene insulation and plastic sheath.
GOST 31943-2012: Telephone cables with polyethylene insulation and plastic sheath. Specifications
GOST 31995-2012: Polyethylene insulated and plastic sheathed block-signalling cables. Specifications
GOST 6285-74: Wire for industrial blasting operations. Specifications
GOST 6436-75: PE-insulated plastic-sheathed block-signalling cables. Specifications
GOST 7006-72: Protective coverings of cables. Design and types, technical requirements and test methods
GOST 7866.3-76: Silicon rubber or cross-linked polyethylene insulated flexible PVC-sheathed shipboard cables. Specifications
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 51311-99: Telephone cables with polyethylene insulation and plastic sheath. Specifications
GOST R 51312-99: Polyethylene insulated and plastic sheathed block-signalling cables. Specifications
GOST R 55436-2013: Gas distribution systems. Coatings with extruded polyethylene on steel pipes. General technical requirements
R 475-82: Recommendations for the use of thermal insulation materials for the construction of oil and gas pipelines operating in special conditions
RD 107.460007.007-92: Plastic materials. Selection manual.
RD 153-39.1-561-08: Instructions for the construction, operation and repair of pipelines from metal-plastic pipes
RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.
ST RK 2339-2013: Plastic insulated small-paired telephone cables. Specification
ST RK 2526-2014: Heater wires. Technical conditions
ST RK 2794-2015: Wires are self-supporting, insulated and protected for overhead power lines. Technical conditions
TU 2245-010-44271562-2004: Tape, heat-shrinkable polyethylene radiation-modified "Therma-L"
TU 576431-006-01297858-99: Heat-hydro-insulated pipes with thermal insulation made of polyurethane foam. Technical conditions
TU 576431-009-01297858-99: Pipeline elements with polyurethane foam insulation. Technical conditions
TU 95 1613-01: Polyethylene heat shrink tubes. Technical conditions
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.