GOST 27358-87
ГОСТ 27358-87
|
|
Press moulds for manufacturing of plastic items
Пресс-формы для изготовления изделий из пластмасс
Status: Effective. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 666 of 03/28/90
This standard applies to molds, their parts and components for the manufacture of plastic products by pressing (direct and injection molding) and injection molding, operated on hydraulic presses, injection molding machines. This standard does not apply to molds that are not marketable products and are produced according to special requirements.
Настоящий стандарт распространяется на пресс-формы, их детали и узлы, предназначенные для изготовления изделий из пластмасс методами прессования (прямого и литьевого) и литья под давлением, эксплуатируемые на гидравлических прессах, литьевых машинах. Настоящий стандарт не распространяется на пресс-формы, не являющиеся товарной продукцией и выпускаемые по специальным требованиям
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
8/5/1987
SKU: RUSS19365
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.8 Machinery and equipment for processing of polymeric materials »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.200 Equipment for production of rubber and plastics »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.200 Equipment for production of rubber and plastics »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G2 Industrial tools and accessories »
G21 Tools and devices for hot processing »
National Standards for OKSTU »
TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS »
Stamps and molds »
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers
GOST 11284-75: Through holes for fasteners. Dimensions
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.017-93: The forging and pressing equipment general safety requirements
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12876-67: Bearing surface under fasteners. Dimensions
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14034-74: Centre holes. Dimensions
GOST 14140-81: Basic norms of interchangeability. Position tolerances of bore axes for fasteners
GOST 14192-96: Cargo marking
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 15623-84: Wooden cases for tools and accessories. Specifications
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16511-86: Wooden boxes for electrical equipment. Specifications
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.2-82: Bolts, screws, and studs. Surface imperfections and monitoring methods
GOST 1759.3-83: Nuts. Surface defects and methods of control
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 2.304-81: Unified system for design documentation. Letters for drawings
GOST 2.601-95: Operational documents
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21140-88: Containers
GOST 24296-93: Hardened cylindrical pins. Specifications
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions
GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions
GOST 26358-84: Pig iron castings
GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST 3128-70: Cylindrical pins unhardened. Construction and dimensions
GOST 3129-70: Taper pins. Construction and dimensions
GOST 3333-80: Graphite lubricant
GOST 4543-71: Structural alloyed steel
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8820-69: Grinding stone exit grooves. Shape and sizes
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9378-93: Roughness comparison specimens
GOST 9464-79: Taper pins with internal thread. Construction and dimensions
GOST 977-88: Steel castings. General specifications
The Document is Referenced By:
GOST 4.489-89: Product-quality index system. Press moulds for manufacturing of plastic articles. Index nomenclature
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.