GOST R 51383-99
ГОСТ Р 51383-99
|
|
Automatic forced draught burners for gaseous fuels. Technical requirements, safety requirements and test methods
Горелки газовые автоматические с принудительной подачей воздуха. Технические требования, требования безопасности и методы испытаний
Status: Not effective - Superseded. IUS 1-2015
This standard establishes the terminology, general requirements for the design and operation of automatic gas burners with forced air supply, their equipment with control and safety devices, transportation and storage, as well as typical test methods for these burners. This standard applies to newly developed automatic gas burners 5.0 MW inclusive with a fan for supplying air for combustion, which are intended for use in heat generation various types. This standard does not apply to burners with air supply due to the vacuum created by the exhaust fan, intended for technological processes, although some of the requirements of the standard may be applicable to them
Настоящий стандарт устанавливает терминологию, общие требования к конструкции и функционированию автоматических газовых горелок с принудительной подачей воздуха, их оснащению устройствами управления и безопасности, транспортированию и хранению, а также типовые методики испытаний указанных горелок.Настоящий стандарт распространяется на вновь разрабатываемые автоматические газовые горелки тепловой мощностью до 5,0 МВт включительно с вентилятором для подачи воздуха на горение, которые предназначены для использования в теплогенераторах различных типов. Настоящий стандарт не распространяется на горелки с подачей воздуха за счет создаваемого вытяжным вентилятором разрежения, предназначенные для технологических процессов, хотя некоторые требования стандарта могут быть применимы и к ним
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
11/30/1999
SKU: RUSS19378
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
016/2011 TR CU. On safety of gaseous fuel machines »
Regulations and standards (to ТР ТС ТС 016/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.4 Thermal and electrothermal equipment »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.20 Gas burners »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.20 Gas burners »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G40 Classification, nomenclature and general rules »
National Standards for OKSTU »
CHEMICAL AND PETROLEUM ENGINEERING »
Gas-consuming industrial equipment »
The Document is Replaced With:
GOST R 51383-2012: Automatic burner gas forced air. Technical safety requirements and test methods
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 11032-97: Domestic gas storage water heaters. General specifications
GOST 11881-76: Controllers acting without
GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 19910-94: Household gas running water heaters
GOST 20219-74: Water flow gas heaters for domestic purposes
GOST 21204-97: Industrial gas burners. General technical requirements
GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp
GOST 22667-82: Combustible natural gases. Methods to calculate calorific value, specific gravity and Wobbe index
GOST 27824-2000: Industrial burners for liquid fuel. General technical requirements
GOST 28091-89: Industrial burners for liquid fuel. Test methods
GOST 29134-97: Industrial gas burners. Test methods
GOST 617-90: Copper tubes. Specifications
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST 7.67-94: System of standards on information librarianship and publishing. Codes of names of countries
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST R 50696-94: Domestic gas ranges. General specifications
GOST R 51318.11-99: Electromagnetic compatibility of technical equipment. Radio disturbance from industrial, scientific, medical and domestic (ISMD) radio-frequency equipment. Limits and test methods
GOST R 51320-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance. Test methods for technical equipment which are man-made radio disturbance sources
GOST R IEC 335-1-94: Safety of household and similar electrical appliances. General requirements and test methods
GOST R IEC 60730-1-2002: Automatic electrical controls for household and similar use. General requirements and test methods
The Document is Referenced By:
GOST 21204-97: Industrial gas burners. General technical requirements
GOST 29134-97: Industrial gas burners. Test methods
GOST R 50591-2013: Gas-consuming thermal units. Industrial gas burners. Limiting concentration rates of NOx in combustion products
GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking
GOST R 54442-2011: Heating boilers. Part 3. Gas-fired central heating boilers. Assembly comprising boiler body and a forced draught burner. Testing of heat engineering
GOST R 54444-2011: Heating boilers. Part 7. Boilers with gas burners with forced air central heating supply with a thermal input not exceeding 1000 kW
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 3. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
