PB 10-115-96

ПБ 10-115-96

Regulations of design and safe operation of pressure vessels

Правила устройства и безопасной эксплуатации сосудов, работающих под давлением

Status: Not effective - Superseded

The rules establish requirements for the design, installation, manufacture, reconstruction, commissioning, installation, repair and operation of vessels, tanks, barrels, cylinders, pressure chambers operating under excessive pressure. Requirements for installation and repair are similar to the requirements for the manufacture of vessels. Rules are obligatory for all organizations and individual entrepreneurs, regardless of the form of ownership and legal form

Правила устанавливают требования к проектированию, устройству, изготовлению, реконструкции, наладке, монтажу, ремонту и эксплуатации сосудов, цистерн, бочек, баллонов, барокамер, работающих под избыточным давлением. Требования к монтажу и ремонту аналогичны требованиям к изготовлению сосудов. Правила обязательны для всех организаций и индивидуальных предпринимателей, независимо от форм собственности и организационно-правовой формы

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosgortekhnadzor of Russia, 4/18/1995

SKU: RUSS19380

Price: $265.00


The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of supervisory authorities » Regulatory documents of Gosgortekhnadzor »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Soldering »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 2 Special industrial safety requirements for operation of a hazardous production facility » 2.6 Industrial safety requirements for pressure equipment »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.110 Safety of machinery »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.020 Storage tanks for liquids and gases » 23.020.30 Pressure vessels, gas cylinders »


The Document is Replaced With:

PB 03-576-03: Regulations of design and safe operation of pressure vessels

The Document References:

GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications

GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 11068-81: Electric-welded pipes from corrosion-resistant steel

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements

GOST 1215-79: Malleable iron castings

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 1412-85: Flakish graphite cast iron

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 1525-91: Rods of monel. Specifications

GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 17217-79: Copper-nickel alloyed tubes grade Mnzh 5-1

GOST 17232-99: Aluminium and aluminium alloys plates. Specifications

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 17711-93: Cast copper-zink alloys (brass). Grades

GOST 1789-70: Beryllium bronze strips and ribbons. Specifications

GOST 18175-78: Tin-free pressure-worked bronzes. Grades

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes

GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19807-91: Wrought titanium and titanium alloys. Grades

GOST 20072-74: Heat-resistant steel

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21646-76: Brass tubes for heat exchange apparatus

GOST 21945-76: Seamless hot-rolled pipes from titanium-based alloys

GOST 22178-76: Titanium and titanium alloys sheets. Specifications

GOST 2246-70: Welding steel wire. Specifications

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 23755-79: Plates of titanium and titanium alloys. Specifications

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 25859-83: Steel vessels and apparatuses. Norms and methods of fatigue strength calculation under low-cyclic loads

GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications

GOST 26358-84: Pig iron castings

GOST 26492-85: Titanium and titanium alloys rolled bars. Specifications

GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions

GOST 380-94: Normal quality carbon steel

GOST 4543-71: Structural alloyed steel

GOST 4784-97: Aluminium and wrought aluminium alloys. Grades

GOST 492-73: Nickel, nickel and copper-nickel alloys treated under pressure. Grades

GOST 494-90: Pipes of brass

GOST 495-92: Copper sheets and ribbons. Specifications

GOST 5063-73: Ribbons of cupro-nickel alloys. Specifications

GOST 535-88: Common quality carbon bar and shaped sections. General specifications

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5521-93: Shipbuilding rolled steel

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 617-90: Copper tubes. Specifications

GOST 6235-91: Strips and ribbons of nickel. Specifications

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7769-82: Alloyed cast iron for castings with special properties

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 931-90: Brass sheets and strips. Specifications

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 977-88: Steel castings. General specifications

GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

PB 03-273-99: Rules for qualification test of welders and welding production specialists

RD 03-131-97: Regulations on Arrangement and Conducting of Acoustic-Emissive Control of Vessels, Units, Boilers and Process Pipelines

RD 03-444-02: The provision of procedure for training and qualification test of workers of organizations engaging in activities of industrial safety of hazardous industrial sites under supervision of Gosgortekhnadzor, Russia

SNiP 2.01.01-82: Construction climatology and geophysics

The Document is Referenced By:

FR 1.31.2013.15027: Quantitative chemical analysis of water. Method for measuring mass concentrations of ethylene glycol and diethylene glycol in natural and waste waters by gas chromatography

FR 1.31.2016.24509: Quantitative chemical analysis of water. Method for measuring the mass concentration of ethylene glycol and diethylene glycol in samples of natural and waste water by gas chromatography

GOST 12.2.016-81: Occupational safety standards system. Gas compressing equipment. General safety requirements

GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements

GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements

GOST 12.2.092-94: Occupational safety standards system electromechanical and electrical heating equipment for the catering industry

GOST 12.2.115-86: Occupational safety standards system. Blowout preventer equipment. Safety requirements

GOST 12.3.027-2004: Foundry work. Safety requirements

GOST 20680-2002: Mechanical mixing devices (agitated vessels). General specifications

GOST 31512-2012: Medical monoplaced fixed barochambers. General technical requirements

GOST R 12.2.144-2005: Occupational safety standards system. Fire-fighting technics. Safety requirements. Test methods

GOST R 51057-2001: Fire fighting equipment. Portable fire extinguishers. General technical requirements. Test methods

GOST R 51316-99: Medical monoplaced fixed barochambers. General technical requirements

GOST R 51564-2000: Drying and evaporating apparatus and plants. Safety requirements. Test methods

GOST R 51637-2000: Premixes. Methods for the determination of total mass fraction of microelements (manganese, iron, copper, zinc, cobalt)

GOST R 51673-2000: Gaseous pure hydrogen. Specifications

GOST R 51706-2001: Ozonisation equipment. Safety requirements

GOST R 51753-2001: High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications

GOST R 51966-2002: Radioactive contamination. Technical facilities for decontamination. General technical requirements

GOST R 52264-2004: Pressure diving chambers. General specifications

GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications

GOST R 52639-2006: Open-circuit diving apparatus. General specifications

GOST R 58432-2019: Laser hardening of mechanical engineering parts. Technological process

GOST R 8.754-2011: State system for ensuring the uniformity of measurements. Analysers of oxygen dissolved in water. Verification procedure

Manual: Manual for impulse and low consumption fire extinguishing systems

MDS 12-11.2002: Procedures Manual for SNIP 12-03-2001 "Occupational Safety and Health in Construction. Part 1: General Requirements" for Occupational Safety and Health Training and Testing of Supervisors and Specialists in Construction

MDS 12-14.2003: Methodological manual for SNiP 12-04-2002

MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization

MDS 12-17.2004: Methodological manual for the joint venture 12-133-2000 Safety of labor in construction. Regulations on the procedure for certification of workplaces on working conditions in construction and housing and communal services. Expert safety assessment of non-

MDS 12-26.2006: Methodological manual for the examination of knowledge of labor protection requirements by executives and specialists of construction organizations

MDS 12-27.2006: Methodological manual for conducting labor protection training for executives and specialists of construction organizations

MDS 12-28.2006: Methodological guide for the expert assessment of the safety of non-stationary jobs at construction sites

Methodological Recommendations 29 FC/828: Methodological Recommendations. Gas chromatographic determination of the mass concentration of hexane, heptane, acetaldehyde, acetone, methyl acetate, ethyl acetate, methanol, iso-propanol, acrylonitrile, n-propanol, butyl acetate, iso-butanol, n-butanol, benzene, toluene, ethylbenzene, m-, o- and p-xylols, isopropylbenzene, styrene, alpha-methylstyrene in water extracts from polymeric materials of different composition

Methodological Recommendations 29 FC/830: Gas chromatographic determination of the mass concentration of benzene, toluene, ethylbenzene, m-, p- and o-xylols, iso-propylbenzene, n-propylbenzene, styrene, alpha-methylstyrene in water extracts from polystyrene plastics. Methodical recommendations

MI 2529-99: State system for ensuring uniformity of measurements. Chemical gas detectors GH-E. Method of verification

MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE

MI 3261-2010: State system for ensuring the uniformity of measurements. Means of measuring the concentration of dissolved oxygen in water. Methods of verification

Model series 20.0027: Reinforced Concrete Supports for Joint Suspension of 10 kV Overhead Line Protected Wires and Self-Carrying Insulated Wires of Double-Chain 0.4 kV Overhead Line. Working drawings

MR 01.022-07: Gas chromatographic determination of acetaldehyde, acetone, methyl acetate, ethyl acetate, methanol, iso-propanol, ethanol, n-propyl acetate, n-propanol, iso-butyl acetate, butyl acetate, iso-butanol, n-butanol released into the air from materials of diff

MR 01.023-07: Gas chromatography determination of hexane, heptane, benzene, toluene, ethylbenzene, m-, o-, p-xylenes, isopropylbenzene, p-propylbenzene, styrene, alpha-methylstyrene, benzaldehyde in air from a closed volume containing materials of different composition

MR 01.024-07: Gas chromatographic definition of hexane, heptane, ethyl aldehyde, dimethyl ketone, methyl acetate, ethyl acetate, methylic alcohol, isopropyl alcohol, cyanoethylene, n-propanol, n-propyl acetate, butyl acetate, isobutanol, n-butanol, phenyl hydride, methyl benzene, ethylbenzene, m-, o- and p-dimethylbenzene, isopropylbenzene, styrene, alphamethylstyrene in water extracts of different composition materials

MR 01.025-07: Gas chromatographic determination of dimethyl phthalate, dimethyl terephthalate, diethyl phthalate, dibutyl phthalate, butyl benzyl phthalate, bis (2-ethylhexyl) phthalate and dioctyl phthalate in aqueous extracts from materials of different composition

MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life

MU OT RM 02-99: Assessment of the safety of workplaces for their certification of working conditions

MUK 4.1.1304-03: Gas chromatographic measurement of mass concentrations of 3a, 4, 7, 7a-tetrahydro-4,7-methano-1H-indene (dicyclopentadiene) in the air of the working area

MUK 4.1.1309-03: Gas chromatographic measurement of the mass concentrations of ethane-1, 2-diol (monoethylene glycol) in the air of the working area

MUK 4.1.1350-03: Gas chromatographic measurement of mass concentrations of 2-chloroethanol (ethylene chlorohydrin) in the working area air

MUK 4.1.1351-03: Measurement of mass concentrations of ethyl alpha cyan alpha ethyl phenylacetate (alpha cyano alpha ethyl phenylacetic acid ethyl ester) in the air of the working zone using gas chromatography

MUK 4.1.1362-03: Gas chromatographic measurement of mass concentrations of 2-methyl-4-oxo-3- (2-propenyl) -cyclopent-2-ene-1-yl-2, 2-dimethyl-3- (2-methylprop-1-enyl) -cyclopropanecarboxylate esbiotrin) in the air of the working area. Methodical instructions

MUK 4.1.1363-03: Gas chromatographic measurement of mass concentrations of 2-methyl-4-oxo-3- (2-propenyl) -cyclopent-2-enyl-2, 2-dimethyl-3- (2-methyl-1-propenyl) -cyclopropane carbonate (etoka) working area. Methodical instructions

MUK 4.1.1484-03: Methods for measuring the mass fraction of cadmium, lead, arsenic, iron and copper in alcoholic products by electrothermal atomic absorption spectrometry

MUK 4.1.1621-03: Gas chromatography measuring of mass concentration of hexafluorethane (freon-116) in working zone air

MUK 4.1.1625-03: Gas chromatographic measurement of mass concentrations of decafluorobutane (freon-31-10) in the air of the working area

MUK 4.1.1628-03: Gas chromatographic measurement of mass concentrations of 1, 1-difluoro-1, 2, 2-trichloroethane (freon-122) in the air of the working area

MUK 4.1.1629-03: Measurement of mass concentrations of 1,1-difluoroethylene in working zone area by gas chromatography

MUK 4.1.1634-03: Gas chromatography measuring of mass concentration of pentafluoroiodoethane (freon-R11511) in working zone air

MUK 4.1.1637-03: Gas chromatographic measurement of mass concentrations of (1, 1, 2, 2-tetrafluoroethoxy) methane in the air of the working area

MUK 4.1.1639-03: Gas chromatographic measurement of mass concentrations of trifluoromethane (freon-23) in the air of the working area

MUK 4.1.1674-03: Measurement of concentration of dimethylamine in water by gas chromatographic method

MUK 4.1.1711-03: Measurement of ammonium perrhenate concentrations in the working area air by atomic absorption spectrophotometry

MUK 4.1.1718-03: Gas chromatographic measurement of mass concentrations of 1, 1, 1, 2.3, 3, 3-heptafluoropropane (freon-227sa) in the air of the working area

MUK 4.1.1726-03: Gas chromatographic measurement of mass concentrations of 3-methylenecyclobutanecarbonitrile (cyclobutanecarbonitrile) in the working area air

MUK 4.1.1730-03: Gas chromatographic measurement of mass concentrations of 3-oxo-2- (trifluoromethyl) dodecafluorooctanoic acid (perfluoro-2-methyl-3-oxaoctanoic acid) in the air of the working area

MUK 4.1.1733-03: Gas chromatographic measurement of mass concentrations of ethyl tert-butyl ether (ETBE) in the air of the working area

MUK 4.1.1740-03: Measurement of mass concentrations of 1, 1-dimethylethyl hypochlorite (tert-butyl hypochlorite) in the air of the working area using gas chromatography

MUK 4.1.1742-03: Measurement of mass concentrations of diethyl carbonate (carbonic acid diethyl ester) in the air of the working area using gas chromatography

MUK 4.1.1746-03: Measurement of mass concentrations of 1-methoxypropan-2-ol-acetate (1-methoxy-2-propyl acetate) in the air of the working area using gas chromatography

MUK 4.1.1838-04: Methodical instructions for measuring the level of residual amounts of naphthalene in organs and tissues of animals by gas-liquid chromatography

MUK 4.1.1926-04: Gas chromatographic measurement of mass concentrations of 2,2,3,4,4,4-gesfor-1-butanol (hexafluobutanol) in working zone air

MUK 4.1.1927-04: Gas chromatographic measurement of concentration of 1,1,1,2,3,3,3-Heptafluoropropane (HFC 227 ea) in working zone air

MUK 4.1.1928-04: Gas chromatographic measurement of concentrations of 1,1,1,2,2,3,3-Heptafluoropropane (HFC 227 ca) in air of working zone

MUK 4.1.1930-04: Measurement of mass concentrations of 4-methylphenylene-1,3-diisocyanate (toluenediisocyanate) in workplace air by gas chromatography

MUK 4.1.2552a-09: GC-spectrometric determination of carbon tetrachloride, chlorobenzene, chloroethane, chloroform, chloromethane, 2-chlorotoluene, 4-chlorotoluene, 1, 2-dichlorobenzene, 1, 3-dichlorobenzene, 1, 4-dichlorobenzene, 1, 1-dichloroethane , 1, 2-dichloroethane,

MUK 4.1.2977-12: Measurement of mass concentrations of butan-1-ol (butanol), butylprop-2-enoate (butyl acrylate), methanol, methylprop-2-enoate (methyl acrylate), prop-2-en-1-ala (acrolein), prop-2-enoic (acrylic) acid and ethylprop-2-enoate (ethyl acrylate) in the air of

MUK 4.1.774-99: Determination of iron, zinc, nickel in the urine by atomic absorption

MUK 4.1.986-00: Measurement method for measuring the mass fraction of lead and cadmium in food products and food raw materials using electrothermal atomic absorption spectrometry

MUK 4.1.991-00: Measurement method for measuring the mass fraction of copper and zinc in food products and food raw materials by electrothermal atomic absorption spectrometry

NPB 155-2002: Fire engineering. Fire extinguishers. The order of statement of fire extinguishers on production and realizations of certified tests

NPB 164-2001: Fire equipment. Oxygenous self-contained gas-masks for fireman. General technical requirements. Test methods

NPB 164-97*: Fire fighting equipment. Oxygen gas masks (respirators) for firefighters. General technical requirements and test methods

NPB 165-2001: Fire equipment. Breathing apparatuses with compressed air for fireman. General technical requirements. Test methods

NPB 166-97: Fire engineering. Fire extinguishers. Requirements of exploitation

NPB 169-2001: Fire equipment. Self-rescue for protection breathing and sight of people for come out buildings from fire. General technical requirements. Test methods

NPB 185-99: Fire equipment. Fire fighting centrifugal pumps. General technical requirements. Test methods

NPB 190-2000: Fire equipment. Cylinders for breathing apparatuses with compressed air for fireman. General technical requirements. Test methods

NPB 199-2001: Engineering fire. Extinguishers. Pressurizing sources. Communal specifications. Test methods

NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods

NPB 54-2001: Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods

NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods

NPB 78-99: Automatic gas fire extinguishing systems. Isothermal reservoirs. General technical requirements. Testing methods.

NPB 79-99: Automatic gas fire extinguishing systems. Distribution valves. General technical requirements. Test methods

NPB 80-99: Automatic fire water mist spray extinguishing systems. modules. General technical requirements. Test methods

NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules

NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry

NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry

NTP-APK 1.10.13.002-03: Technological design norms for warehouses of liquid matters for chemicalization

OST 153-39.3-051-2003: Gas-distribution system technical maintenance. Main regulations. Gas-distribution network and gas equipment. Tank and balloon plants

OST 153-39.3-052-2003: Technical operation of gas distribution systems. Gas distribution stations and points. Warehouses of domestic balloons. Gas stations.

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26-04-2153-77: Labour safety standard system. Cryogenic equipment. General safety requirements and constructions.

OST 26-11-10-93: Welded joints. X-Ray TV testing method.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval

OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding

PB 03-428-02: Safety Requirements for Construction of Underground Structures

PB 06-09-92: Uniform safety rules for crushing, sorting, mineral processing and sintering of ores and concentrates

PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises

PB 08-258-98: Rules for the Construction and Safe Operation of the Main Pipeline for the Transportation of Liquid Ammonia

PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations

PB 08-353-00: Offshore Exploration Safety Rules

PB 08-389-00: Safety Rules for Gas Processing Plants Production

PB 09-220-98: Installation and Safe Operation Requirements for Ammonia-Based Refrigeration Equipment

PB 09-224-98: Safety rules for productions using inorganic acids and alkalis

PB 09-297-99: Rules of setup and safe operation of compressor units with piston compressors operating on dangerously explosive and noxious gases

PB 09-322-99: Safety Requirements for Production, Storage, Transportation, and Use of Chlorine

PB 11-219-98: Safety Requirements in Coke Byproducts Operations

PB 11-242-98: Foundry Safety Requirements

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PB 11-48-94: Safety Rules in Ferroalloy Production

PB 12-245-98: Safety Requirements for Gas Supply Facilities

PB 12-368-00: Gas industry safety rules

PND F 13.3.18-98: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring mass concentrations of acetone, ethyl acetate, toluene, butyl acetate, m-, p-xylene and o-xylene in ambient air samples using gas chromatography

PND F 14.1.9-95: Quantitative chemical analysis of water. Methods for measuring the mass concentration of caprolactam in wastewater using gas-liquid chromatography

PND F 16.1:2:2.2:3.59-09: Quantitative chemical analysis of soil. Methods for measuring the mass fractions of benzene and toluene in the soil, soils, bottom sediments, production waste and consumption by gas chromatography

POT R M-002-97: Intersectoral rules on labor protection in foundry

POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals

POT R M-006-97: Intersectoral labor protection rules for cold metal processing

POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products

POT R M-011-2000: Intersectoral rules on labor protection in public catering

POT R M-014-2000: Intersectoral Occupational Safety Rules

POT R M-015-2000: Intersectoral labor protection regulations for the operation of freon refrigeration units

POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings

POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals

POT R M-020-2001: Industry-Wide Occupational Safety and Health Requirements for Electric Welding and Gas Welding Operations

POT R M-022-2002: Intersectoral rules on labor protection during soldering and tinning of products

POT R M-025-2002: Intersectoral rules on labor protection during the operation of water supply and sewer facilities

POT R M-027-2003: Intersectoral rules on labor protection in road transport

POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars

POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry

POT R O-13153-TsSh-877-02: Industry rules for labor protection during maintenance and repair of signaling, centralization and blocking devices on federal railway transport

POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering

POT R O-14000-003-98: Rules for labor protection in the manufacture of boiler work and metal structures

POT R O-152.31.82.03-96: Occupational health and safety regulations in seaports

POT R O-32-TsT-668-99: Rules for labor protection during maintenance and current repair of traction rolling stock and cranes on the railway

POT R O-45-005-95: Occupational Safety and Health Requirements for Work on Cable Communications Lines and Closed-Circuit Radio Broadcasting (Installation of Closed-Circuit Radio Networks)

POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport

POT RO-13153-TsM-933-03: Industry rules for labor protection in the economy of freight and commercial work on the federal railway transport

R 3112199-1094-03: Guidelines for the organization of operation of LPG vehicles running on liquefied petroleum gas

RD 009-02-96: System of Guideline Documents for Fire Automation fire automation installations: technical maintenance and scheduled/preventive repairs.

RD 03112194-1095-03: Guidelines for the organization of operation of gas-cylinder vehicles operating on compressed natural gas

RD 03112194-1098-03: Guidelines for organizing and execution of services and works on conversion of vehicles in service to liquefied oil gas

RD 03112194-1099-03: Guidance on organizing and rendering of services and jobs on conversion of vehicles to exploitation of compressed natural gas

RD 03-357-00: Methodical recommendations for declaration of industrial safety of hazardous production facilities

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus

RD 09-241-98: Methodological guidelines for inspection of technical condition and operational safety of ammonia refrigerating plants.

RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.

RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.

RD 10-319-99: Model Guidelines for Safe Practices for Boiler Plant Personnel

RD 10-369-00: Provisions on steam and hot-water boilers, vessels, steam and hot water pipelines industrial safety expertise.

RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities

RD 14-001-99: Guidelines for the technical diagnosis and extension of the life of steel cylinders under pressure

RD 153-34.0-03.107-2001: Model Ordinance on the Occupational Safety and Health Office in Electric Power Organizations

RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO

RD 153-34.0-03.420-2002: Occupational Safety and Health Requirements for Operation and Maintenance of Automobiles and Other Wheeled Vehicles in the Electric Power Industry

RD 153-34.0-11.340-00: Method for Measurements of Pressure in Steam and Hot Water Boilers, Vessels, and Piping of Thermal Power Station Process Equipment Subject to Monitoring and Inspection by Gosgortekhnadzor of Russia Offices

RD 153-34.0-37.411-2001: Procedural Guidelines for In-Service Steam-Oxygen Cleaning and Passivation of Inner Surfaces of Power Generating Equipment

RD 153-34.0-37.533-2001: Guidelines for determining the brand and optimal concentration of anti-scum for processing make-up and network water of heat supply systems

RD 153-34.1-11.320-00: Natural Gas. Methods for Measurement of Quality Ratings of Gaseous Fuel Supplied to Thermal Power Stations

RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.

RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants

RD 153-34.1-37.525-96: Guidline for the use of tanks of sulfuric acid and sodium hydroxide to the thermal electric power stations

RD 153-34.1-39.502-98: Guidelines for Operation and Procedure and Schedule for Checking safety Devices for Vessels, Apparatus, and Piping Systems of Thermal Power Stations

RD 153-34.1-39.504-00: General technical requirements for fittings of CHP plant ( TPP OTT - 2000).

RD 153-34.3-03.285-2002: Safety Requirements for Construction of Electric Power Transmission Lines and Electrical Installation Work

RD 153-39.4-056-00: Main crude pipeline. Operations rules.

RD 15-73-94: Safety Requirements for Railway Transportation of Hazardous Cargo

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

RD 26.260.011-99: Methodological instructions. Calculated setting of standards for air-tightness of vessels and apparatuses.

RD 26.260.12-99: Service life extension of liquid carbon dioxide vessels. Instructional guidelines.

RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.

RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities

RD 26.260.225-2001: Bodies of cylindrical vessels and devices. Technology, quality assurance

RD 26-17-78-87: Pulsed-arc welding of chemical oil equipment from stainless steels with a consumable electrode in argon

RD 2-97: Regulations on the system for the technical diagnosis of autoclaves in the production of building materials

RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 3112199-1069-98: Fire safety requirements for companies operating vehicles on compressed natural gas

RD 32-CSR-110/34-03: Guidance document. Labor protection during the operation of buildings and structures and the repair and construction work at railway facilities

RD 34.01.203: Model Index of Operations Documentation for Chemical Shop of a Thermal Power Station

RD 34.04.741: Ordinance on Competition Among Operation and Repair Personnel and Adjusting Department Personnel. Part 1: Organization of Professional Skill Competition and Contests Among Operating and Repair Personnel of Electric Power Generating Stations and Electric

RD 34.17.444-97: Method for Acoustic Emission Testing During Leak Tests of Pipelines in Piped Heat Supply Networks

RD 34.49.503-94: Model Guidelines for Content and Application of Primary Means for Fire Suppression at Energy Industry Facilities

RD 52.44.816-2015: Mass concentration of methane and carbon dioxide in the surface layer of atmospheric air. Gas Chromatography Measurement Technique

RD 95 10549-2000: Safety Assessment Requirements for Extending the Life of Nuclear Power Plant Units

RD EO 0052-00: Diesel generator sets for nuclear power plants. General specifications

RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements

RD ROSEK 04-010-98: Guidelines for the technical diagnosis and extension of the service life of pressure chambers

Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SNiP 12-03-2001: Labor safety in construction industry

SNiP 12-03-99: Occupational safety in construction part one. General safety requirements

SNiP 12-04-2002: Safety in construction. Part 2. Construction works

SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)

SO 153-34.17.439-2003: Instruction for prolongation of exploitation term of pressure vessels

SO 34.09.114-2001: Guidelines for quality control of solid, liquid and gaseous fuels for the calculation of specific fuel consumption at thermal power plants

SO 34.23.501-2005: Guidelines for the operation of fuel oil facilities of thermal power plants

SP 11-107-98: Procedure of Development and Composition of the “Engineering and Technical Measures of Civil Defense. Measures for Prevention of Emergencies” Section of Construction Projects

SP 12-133-2000: Safety in construction. Statutes on the procedure for certification of work stations by working conditions in construction and housing and utilities.

SP 12-135-2002: Labor safety in construction. Industry standard instructions for labor protection

SP 12-135-2003: Safety in construction. Industry standard safety instructions. To replace SP 12-135-2002

SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85

SP 41-104-2000: Design of independent heat supply sources

TOI R-66-37-95: Model Guidelines for Occupational Safety and Health for Operators of Mobile Electric-Powered Compressors

TU 1468-001-17192736-01: Seamless welded bends made of alloy and high alloy steel

TU 152-12-008-99: Installation of gas-LPG equipment for work on liquefied petroleum gas (GOS) on buses. Acceptance and release after installation. Test gas systems

TU 3612-005-00220302-98: Shell-and-tube heat exchangers for special purposes. Thermosiphon evaporators. Technical conditions

TU 3612-007-00220302-99: Shell-and-tube heat exchangers for special purposes. Vacuum capacitors. Technical conditions

TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions

TU 3645-007-53149699-2000: Repair equipment for acetylene installation UAS-40 GR

VNE 5-79: Fire Safety Regulations for Chemical Industry Facilities

VNP-10041-2002: Departmental norms and rules for creating coastal fishing enterprises. Treatment facilities

VRD 39-1.10-005-2000: Ordinance on Operation of Gas Distribution Stations of Trunk Gas Pipelines

VRD 39-1.10-049-2001: Правила распространяются на эксплуатацию, реконструкцию и ремонт магистральных, межпромысловых и промысловых конденсатопродуктопроводов и отражают специфику транспорта стабильеого, нестабильного, деэтанизированного конденсата, широкой фракции легких углев

VRD 39-1.10-064-2002: Equipment for liquefied natural gas (LNG). General technological requirements when operating storage, transportation and gasification

VRD 39-1.10-071-2003: Rules of technical operation of power plants for the own needs of OAO Gazprom objects

VRD 39-1.12-067-2002: Operating procedure regulation for the production of output of gas processing plants and refineries

VRD 39-2.5-082-2003: Rules for the technical operation of gas filling stations for compressor stations

VSN 07/02/34 Russian Defense Ministry: Design of fuel depots of the Ministry of Defense of the Russian Federation

VSN 13-2002: Instructions for the design of fire and explosion hazardous production of alcohol, alcoholic beverage and brandy enterprises of the food industry

VSN 21-02-01/MO RF: Automatic gas fire extinguishing installations of the armed forces of the Russian Federation. Norms and design rules

Customers Who Viewed This Item Also Viewed:

Loads and impacts
Language: English
Price: $306.00
Pipeline valves. Methods of control and testing
Language: English
Price: $417.00
Power convertors railway rolling stock. Characteristics and test methods
Language: English
Price: $447.00
Static non-tractive converters for railway rolling stock. General specifications
Language: English
Price: $261.00
Steel grinding balls for ball mills. Specifications.
Language: English
Price: $217.00
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Language: English
Price: $67.00
Three-phase asynchronous motors. General specifications.
Language: English
Price: $397.00
Occupational safety stаndards system. Vibration safety. General requirements
Language: English
Price: $178.00
Rotating electrical machines. Rating and performance
Language: English
Price: $518.00
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $261.00
State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
Language: English
Price: $240.00
Rotating electrical machines. Noise limits
Language: English
Price: $138.00
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $147.00
Centrifugal pumps. Technical specifications. Class I
Language: English
Price: $543.00
Rotodynamic pumps. Test methods
Language: English
Price: $659.00
Construction in seismic regions
Language: English
Price: $553.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!