imgalt

GOST 21631-76

ГОСТ 21631-76

Sheets of aluminium and aluminium alloys. Specifications

Листы из алюминия и алюминиевых сплавов Технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)

The standard applies to sheets of aluminum and aluminum alloys, intended for the needs of the national economy and for export.

Стандарт распространяется на листы из алюминия и алюминиевых сплавов, предназначенных для нужд народного хозяйства и на экспорт.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 3/12/1976

SKU: RUSS19388

Price: $762.00

English keywords: aluminum products;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.5 Non-ferrous metal products »

ISO classifier » 77 METALLURGY » 77.150 Non-ferrous metal products » 77.150.10 Aluminum products »

National standards » 77 METALLURGY » 77.150 Non-ferrous metal products » 77.150.10 Aluminum products »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V5 Non-ferrous metals and their alloys. Rolled non-ferrous metals » V53 Sheets and Stripes »


The Document is Replaced With:

GOST 21631-2019: Sheets of aluminum and aluminum alloys. Technical specifications

GOST 21631-2023: Aluminum and aluminum alloy sheets. Technical conditions

As a Replacement Of:

GOST 12592-67: Structural sheets made of aluminum and aluminum alloys

GOST 13722-68: Aluminum sheets of general purpose

The Document References:

GOST 11069-2001: Primary aluminium. Grades

GOST 11069-74: Primary aluminium. Grades

GOST 1131-76: Strained aluminium alloys in pigs. Technical requirements

GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips

GOST 11739.10-90: Aluminium casting and wrought alloys. Method for determination of lithium

GOST 11739.11-98: Aluminium casting and wrought alloys. Methods for determination of magnesium

GOST 11739.12-98: Aluminium casting and wrought alloys. Methods for determination of manganese

GOST 11739.13-98: Aluminium casting and wrought alloys. Methods for determination of copper

GOST 11739.14-99: Aluminium casting and wrought alloys. Methods for determination of arsenic

GOST 11739.15-99: Aluminium casting and wrought alloys. Methods for determination of sodium

GOST 11739.16-90: Aluminium casting and wrought alloys. Methods for determination of nickel

GOST 11739.17-90: Aluminium casting and wrought alloys. Methods for determination of tin

GOST 11739.18-90: Aluminium casting and wrought alloys. Method for determination of plumbum

GOST 11739.1-90: Aluminium casting and wrought alloys. Methods for determination of aluminium oxide

GOST 11739.19-90: Aluminium casting and wrought alloys. Methods for determination of antimony

GOST 11739.20-99: Aluminium casting and wrought alloys. Methods for determination of titanium

GOST 11739.21-90: Aluminium casting and wrought alloys. Methods for determination of chromium

GOST 11739.22-90: Aluminium casting and wrought alloys. Methods for determination of rare-earth elements and yttrium

GOST 11739.23-99: Aluminium casting and wrought alloys. Methods for determination of zirconium

GOST 11739.24-98: Aluminium casting and wrought alloys. Methods for determination of zinc

GOST 11739.2-90: Aluminium casting and wrought alloys. Methods for determination of boron

GOST 11739.3-82: Aluminium casting and deformable alloys. Methods for determination of beryllium

GOST 11739.3-99: Aluminium casting and wrought alloys. Methods for determination of berillium

GOST 11739.4-90: Aluminium casting and wrought alloys. Methods for the determination of bismuth

GOST 11739.5-90: Aluminium casting and wrought alloys. Methods for determination of vanadium

GOST 11739.6-99: Aluminium casting and wrought alloys. Methods for determination of iron

GOST 11739.7-99: Aluminium casting and wrought alloys. Methods for determination of silicon

GOST 11739.8-90: Aluminium casting and wrought alloys. Method for determination of potassium

GOST 11739.9-90: Aluminium casting and wrought alloys. Methods for determination of cadmium

GOST 12697.10-77: Aluminium. Method for determination of titanium

GOST 12697.11-77: Aluminium. Method for determination of lead

GOST 12697.12-77: Aluminium. Methods for determination of arsenic

GOST 12697.1-77: Aluminium. Methods for determination of vanadium

GOST 12697.2-77: Aluminium. Methods for determination of magnesium

GOST 12697.3-77: Aluminium. Methods for determination of manganese

GOST 12697.4-77: Aluminium. Method for determination of sodium

GOST 12697.5-77: Aluminium. Method for determination of chromium

GOST 12697.6-77: Aluminium. Method for determination of silicon

GOST 12697.7-77: Aluminium. Method for the determination of iron

GOST 12697.8-77: Aluminium. Methods for determination of copper

GOST 12697.9-77: Aluminium. Methods for determination of zinc

GOST 14192-96: Cargo marking

GOST 1497-84: Metals. Methods of tension test

GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters

GOST 24047-80: Half-finished products out of non-ferrous metals and their alloys. Sampling for tensile test

GOST 24231-80: Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis

GOST 25086-87: Nonferrous metals and their alloys. General requirements for methods of analysis

GOST 26877-91: Metal products

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 3221-85: Primary aluminium. Methods of spectral analysis

GOST 3749-77: Checking 90° squares. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4784-97: Aluminium and wrought aluminium alloys. Grades

GOST 5009-82: Abrasive cloth. Specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 6456-82: Abrasive paper

GOST 6507-90: Micrometers. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7727-81: Aluminium alloys. Methods of spectral analysis

GOST 8026-92: Levelling rules. Specifications

GOST 9.510-93: Unified system of corrosion and ageing protection. Aluminium and aluminium alloys semifinished products. General requirements for temporary anticorrosive protection, packing, transportation and storage

The Document is Referenced By:

Album A 31.0105.01-89: Control parts. Handwheels, rotary handles, knobs, buttons. Design and dimensions

ATK 24.218.01-90: Bosses, Plugs, and Gaskets. Design, Dimensions, and General Technical Specifications

ATK 26-18-10-94: Devices for Installation of Temperature Measuring Devices for Use at Nominal Pressure from 0.6 to 16.0 MPa. Plugs. General Technical Requirements

GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications

GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications

GOST 12172-2016: Phenol-polyvinylacetyl adhesives. Specifications

GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications

GOST 12644-80: Hollow and semi-hollow rivets. Specifications

GOST 12707-77: Wash primers. Specifications

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 14192-77: Marking of cargoes

GOST 17019-78: Fixing parts for pipelines and cables. Specifications

GOST 17020-78: Clamps, holders and belts for fixing of pipelines and cables. Design and sizes

GOST 17151-2019: Utensils made of sheet aluminum. General specifications

GOST 17151-81: Cooking utensils made

GOST 17327-95: Bread baking forms

GOST 17581-72: Mechanical signal flags of warning means. Design, dimensions and technical requirements

GOST 17678-80: Light cramps for pipe-line and cable fixing. Design and dimensions

GOST 17679-80: Light yokes for pipe-line and cable fixing. Design and dimensions

GOST 17680-80: Earrings lightweight for attaching cables. Design and dimensions

GOST 17746-79: Spongy titanium. Specifications

GOST 18677-73: Seals. Design and dimensions

GOST 1973-77: Arsenous anhydride. Specifications

GOST 19752-84: Sealing metal flat gaskets for closed gates. Specifications

GOST 21029-75: Aluminum barrels for chemical products

GOST 21479-87: Case for stitching of operation and repair documentation. Construction

GOST 21513-76: Paint materials. Methods for determination of paint film. Water - and moisture absorptivity

GOST 21562-76: Metal-faced building panels with foam plastic thermal insulation. General specifications

GOST 22091.10-84: X-ray devices. The method of measuring AL(CU) equivalent of X-ray device envelope

GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment

GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications

GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications

GOST 22564-77: Enamels KO-84 and KO-859. Specifications

GOST 22742-77: Sets of square connectors fixture of radio electronic items. Specifications

GOST 23.219-84: Products wear resistance assurance. Test method for wear resistance of materials and details with hydro erosion wearing by dispersed particles

GOST 23357-78: Threaded pipeline connections. Joint washers for radial mounting. Construction

GOST 23358-78: Fittings made on the thread. Sealing packings. Dimensions. Technical requirements

GOST 23358-87: Threaded pipe-line connections. Joint washers. Design

GOST 23486-79: Wall metal-faced sandwich panels with polyurethane foam thermal insulation. Specifications

GOST 23747-88: Doors of aluminium alloys. Specifications

GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications

GOST 23997-80: Nozzles for pressure gauges. Technical requirements

GOST 24285-80: Sealant of marks УТ-34. Specifications

GOST 24767-2018: Aluminium and aluminium alloys cold-formed sections for enclosing structures. Specifications

GOST 24767-81: Aluminium and aluminium alloys cold-formed sections for wall and roof structures. Specifications

GOST 25001-81: Rolled-welded aluminium sheet billets for heat-exchangers. Specifications

GOST 25010-81: Howks for plastering. Specifications

GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 25718-83: Primers AK-069 and AK-070. Specifications

GOST 25922-83: Electrical insulating materials. Determination of stiffness. Methods of test

GOST 26140-84: Medical x-ray units

GOST 26454-85: Adhesives. Method for determination of elasticity modulus of adhesive in adhesive bond

GOST 26996-86: Polypropylene and copolymers of propylene. Specifications

GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications

GOST 28638-90: Bristle brush articles for household use. General specifications

GOST 30373-95: Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, basic parameters, technical requirements and test methods

GOST 30765-2001: Metal transport packagings. General specifications

GOST 3111-81: Spherical plugs. Construction and dimensions

GOST 31174-2017: Gates of metall. General specifications

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32309-2013: Casting utensils of aluminium alloys. General specification

GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33950-2016: Pyrotechnic products. Test methods

GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions

GOST 34233.4-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 4266-79: Water colour scale. Specifications

GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance

GOST 5037-78: Metallic churns

GOST 5037-97: Metal cans for milk and dairy products

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending

GOST 7171-78: Petrol-resisting grease. Specifications

GOST 7328-82: General-purpose and reference mass gages

GOST 7948-80: Steel construction plumbs-lines. Specifications

GOST 8702-2005: Wallpaper, coloured paper, board and their products. Methods for determination of colour fastness to light under artificial lighting (xenon lamp)

GOST 8702-88: Paper and wallpaper. Method for determination of colour fastness to light by organic pigments and dyes

GOST 8802-78: Passenger tram-cars. Specifications

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 9416-83: Building levels. Technical requirements

GOST R 50414-92: Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, general parameters, technical requirements and test methods

GOST R 51016-97: Sets of carbon steel and aluminium alloys. General specifications

GOST R 51162-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications

GOST R 51162-98: Casting aluminium utensils. General specifications

GOST R 51242-98: Mechanical protective constructions and electromechanical protective constructions for doorways and windows ventings. Technical requirements and test methods for breaking resistance

GOST R 51271-99: Pyrotechnic goods. Methods of tests

GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications

GOST R 54407-2011: Orthopaedic shoe. General technical specifications

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55260.1.5-2012: Hydro power plants. Part 1-5. Hydrotechnical constructions of hydroelectric power station. Requirements for projection in seismic areas

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 56371-2015: Aluminium alloy sheets for shipbuilding. Specifications

GOST R 56674-2015: Casting of aluminium alloys and solid stamping of sheet aluminium cookware with non-stick coating. General specifications

GOST R 56674-2018: Casting cookware of aluminum alloys with non-stick coating. General specifications

GOST R 57205-2016: Electromagnetic compatibility of technical equipment. Radar absorbing polymer composite coating. General specifications

GOST R 57212-2016: Electromagnetic compatibility of technical equipment. Radar absorbing polymer paint coatings. General specifications

GOST R 58488-2019: Punching sieves for grain. General specifications

GOST R 58513-2019: Plumbing steel construction. Technical conditions

GOST R 58514-2019: Building levels. Technical conditions

GOST R 8.965-2019: State system for ensuring uniformity of measurements. Acoustic emission devices, information-measuring systems and complexes. Verification Method

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

MI 263-82: Guidelines. Device measuring two-coordinate DIP-1. Methods and means of verification

MI 7-74: State system for ensuring uniformity of measurements. Method of verification of exemplary measures of surface density

ODM 218.6.020-2016: Guidelines for road marking

ODM 218.8.011-2018: Guidelines for determining the characteristics and selection of noise protection structures of roads

ONTP 444-86: National Engineering Design Standards for Facilities for the Production of Mineral Wool Products and Building Components

OST 12.28.333-91: Mining equipment. Products made of light alloys. Friction intrinsic safety. General technical requirements and test methods.

OST 153-39.3-051-2003: Gas-distribution system technical maintenance. Main regulations. Gas-distribution network and gas equipment. Tank and balloon plants

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.460-99: Lobes, locks and pads. Design, dimensions and general technical requirements.

OST 26.260.462-99: Devices for installation of instruments measuring the temperature for PN from 0.6 to 16 MPa. Types, design, dimensions and general technical requirements

OST 26.260.463-99: Asbestos-metal packing for fitting flanges. Design, dimensions and general specifications. .

OST 26-01-86-88: fixed metal seals for vessels and apparatus for pressure over 10 to 100 MPa (100 to 1000 kgf / cm2). Types. Design and dimensions. Technical requirements . Acceptance rules. Control methods.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PKO-2010.6: Reference materials for the design work of the electrical part of the project

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNAE G-7-022-90: Equipment and pipelines of nuclear power units. Arc welding of aluminium alloys in protective gases. Main provisions

R 475-82: Recommendations for the use of thermal insulation materials for the construction of oil and gas pipelines operating in special conditions

R 536-84: Recommendations for the design of thermal insulation structures of trunk pipelines

RD 153-34.1-03.352-99: Explosion Safety Requirements for Fuel Supply and for Facilities for the Manufacturing and Combustion of Powder Fuel

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 26-15-88: Vessels and apparatus. Norms and methods of strength and tightness calculation for flanged joints.

RD 34.30.506-90: Procedural Guidelines for Standardization of Thermal Expansion of Steam Turbine Cylinders at Thermal Power Stations

RD 34.45.614: Guide to Overhaul of Turbine Generators TVF-120-2 and TVF-100-2

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 50-703-91: Instructions. The basic supporting structures of electronic equipment. Technological requirements

RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements

RD EO 0586-2004: Nuclear power plants equipment and pipelines thermal insulation. Design standards

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RM 38.14.008-94: Guiding Material. Radial (centrifugal) and axial fans. Maintenance and repair.

RST RSFSR 131-87: Metal folding beds. Technical conditions

RST RSFSR 457-79: Harmonics wind and labial. General technical conditions

RST RSFSR 45-86: Sledge for children. Technical conditions

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 580-77: Bows. General technical conditions

RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions

RST RSFSR 91-78: Percussion musical instruments. General technical requirements

RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers

SN 542-81: Instructions for the design of thermal insulation of equipment and pipelines of industrial enterprises

SNiP 2.03.06-85: Aluminium structures

SO 153-34.03.352-2003: Instructions for ensuring the explosion safety of fuel injection systems and installations for the preparation and combustion of pulverized fuel

SP 128.13330.2012: Aluminium structures

SP 17.13330.2011: Roofs

SP 17.13330.2017: The roofs

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

SP 429.1325800.2018: Enclosing constructions with effective insulation and sheet cladding. Design rules

SP 443.1325800.2019: Bridges with aluminum alloy structures. Design rules

SP 83.13330.2016: Industrial furnaces and brick chimneys

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

TR 12220-TI.2001: URSA thermal insulation products in the construction of thermal insulation of industrial equipment. Recommendations for use with technical solutions album

TR 129-02: Technical recommendations for the construction of heat and water supply networks of steel pipes with polyurethane foam insulation in underground channel and ground gaskets

TSN 23-337-2002: Thermal insulation of equipment and pipelines. Sverdlovsk region

TU 102-124-77: Aluminum hinged panels for BNP type boxes

TU 102-190-78: Aluminum frame panels for walls of heated industrial buildings

TU 102-356-83: Three-layer roofing panels from steel corrugated profile and mineral wool insulation

TU 102-357-83: Three-layer steel wall panels with mineral wool insulation for block boxes and blocks

TU 102-358-83: Three-layer steel coating panels with mineral wool insulation for block boxes

TU 102-462-88: Frame Asbestos-Cement Wall and Roof Panels with Mineral Wool Insulation

TU 102-464-88: Three-layer aluminum frame wall panels with mineral wool insulation

TU 102-58-75: Asbestos-cement framework panels for walls and coatings of heated industrial buildings

TU 13-04-1-86: Pallets for pressing equipment for chipboard manufacturing

TU 13-352-80: Pallet PR-6. Technical conditions

TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing

TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions

TU 26-02-1158-95: Horizontal air coolers

TU 26-02-1162-95: Shell and tube heat exchangers for elevated temperatures and pressures with a floating head and a compensator on it. Technical conditions

TU 36-1180-85: Industrial Structures for Thermal Insulation of Pipelines, Apparatus and Tanks

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 5284-001-56506912-03: The panel is sound-absorbing and soundproof, noise-proof. Technical conditions

TU 6-02-I-015-89: Silicone adhesive sealant Elastosil 137-182 heat-conducting

TU 6-10-866-85: Lucky VL-725, VL-725 G and enamel VL-725 aluminum

TU 6-14-95-2014: Clay Leukonate

VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation

VSN 438-83: General Specified Quantity Allowances for Building Materials. Compendium 22: Thermal Insulating Operations

VSN 50-83: Design Guidelines for Piping for Liquid Products of Air Separation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
United power system and isolated power systems. Operative-dispatch management. Frequency control and control of active power. Norms and requirements
Language: English
Price: $191.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!