GOST 28330-89
ГОСТ 28330-89
|
|
Asynchronous electrical machines with power from 1 to 400 kw inclusive. Motors
Машины электрические фсинхронные мощностью от 1 до 400 кВт включительно
Status: Not effective - Canceled in the Russian Federation. Registration information 396-st dated 12/22/2000; IUS 3-2001
The standard applies to general-purpose asynchronous motors for operation from AC mains voltage up to 660 V, manufactured for the needs of the national economy and for export. The standard does not apply to engines installed on the means of land, sea and air transport, explosion-proof engines. Types of climatic versions of engines: U2; Y3; Y5; UHL2; UHL3; UHL4; T2; T3; OM2.5; O4, as well as (for chemical resistant versions) U3.5 according to GOST 15150. At the request of the customer, the engines can be manufactured of types of climate versions U1, UHL1, T1 according to GOST 15150
Стандарт распространяется на асинхронные двигатели общего назначения для работы от сети переменного тока напряжения до 660 В, изготовляемые для нужд народного хозяйства и экспорта. Стандарт не распространяется на двигатели, устанавливаемые на средствах наземного, морского и воздушного транспорта, взрывозащищенные двигатели. Виды климатических исполнений двигателей: У2; У3; У5; УХЛ2; УХЛ3; УХЛ4; Т2; Т3; ОМ2,5; О4, а также (для химостойких исполнений) У3,5 по ГОСТ 15150. По требованию заказчика двигатели могут изготовляться видов климатических исполнений У1, УХЛ1, Т1 по ГОСТ 15150
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
11/13/1989
SKU: RUSS19417
The Product is Contained in the Following Classifiers:
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.30 Engines »
National standards »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.30 Engines »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E6 Electric machines, transformers and converters »
E61 Electric motors »
National Standards for OKSTU »
ELECTRIC MACHINES »
AC motors from 0.25 to 100 kW »
National Standards for OKSTU »
ELECTRIC MACHINES »
AC motors with a power of St. 100 kWt »
The Document References:
GOST 11828-86: Rotating electrical machines. General test methods
GOST 11929-87: Rotating electrical machinery. General test methods. Noise levels determinations
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements
GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications
GOST 12126-86: Small power electric machines. Mounting dimensions
GOST 12139-84: Electric rotary machines. Ranges of rated output, voltages and frequencies
GOST 12379-75: Electric rotating machines. Methods of vibration evaluation
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 13267-73: Rotating electrical machines and directly connected them nonelectrical ones. Shaft heights and control methods
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543-70: Electrical articles. Applications for different climatic regions. General technical requirements as to environment climatic aspects influence
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 15963-79: Electrical articles for tropical application. General technical requirements and methods of testing
GOST 16511-86: Wooden boxes for electrical equipment. Specifications
GOST 16962-71: Electronic and electrical equipment. Mechanical and climatic influence. Requirements and test methods
GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines
GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence
GOST 183-74: Rotating electrical machines
GOST 18620-86: Electrotechnical articles
GOST 18709-73: Rotating electrical machines of middle size. Mounting dimensions.
GOST 19348-82: Electro-technical items for agricultural purposes
GOST 2.124-85: Sequence of application of purchased products
GOST 20459-87: Rotating electrical machines. Means of cooling. Symbols.
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle
GOST 24682-81: Electrotechnical products
GOST 24683-81: Electrotechnical products. Methods of controlling resistance to attack by special media
GOST 2479-79: Rotating electrical machines. Symbols for types of construction and mounting arrangements.
GOST 25941-83: Rotating electrical machines. Methods for determining losses and efficiency
GOST 26964-86: Rules of state acceptance of products. General principles
GOST 27917-88: Rotating electrical machines. Built in thermal protection. Thermal detector and control units used in thermal protection systems
GOST 28327-89: Rotating electrical machines. Starting performances of single-speed three-phase cage induction motors for voltages to 660 V inclusive
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 4541-70: Rotating electrical machines. Letter symbols of fixing and overall dimensions
GOST 7217-87: Rotating electrical machines. Asynchronus motors. Test methods
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure
GOST 8592-79: Rotating electrical machines. Mounting and connecting dimensions. Tolerances and control methods
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
The Document is Referenced By:
GOST 31605-2012: Asynchronous electrical mashines of power from 1 to 400 kW inclusive. Motors. Efficiency and power factors
GOST IEC 60034-28-2015: Electric rotary machines. Part 28. Test methods for determining the parameters of an equivalent circuit for replacing three-phase low-voltage asynchronous motors with a squirrel-cage rotor
GOST MEK 60204-1-2002: Safety of machines. Electrical equipment for machined and devices. Part 1. General requirements
GOST R 51677-2000: Asynchronous electrical machines of power from 1 to 400 kVt inclusive. Motors. Efficiency and power factor
GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,
ST RK 1531-2006: Locomotives of main railways of 1520 mm gage. AC electric rotating tractive machinery. Requirements for acceptance programmes and test procedures
STB IEC 61058-1-2009: Circuit-breakers for electric appliances. Part 1. General requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
