GOST 30067-93
ГОСТ 30067-93
|
|
Universal single bucket full turning excavators
Экскаваторы одноковшовые универсальные полноповоротные. Общие технические условия
Status: Effective - Supersedes. IUS 7-1995
The standard applies to single-bucket universal revolving excavators weighing up to 71 tons, designed mainly for the development of non-frozen soils of categories I-IV in accordance with Appendix A, as well as previously loosened rocky and frozen soils in the temperature range from minus 40 degrees. Celsius to plus 40 degrees. Celsius (for other temperature ranges, excavators are manufactured according to special requirements) and establish design requirements, as well as acceptance and test methods. Specific working conditions of excavators indicate in the technical specifications for each model. The standard does not apply to special-purpose excavators (railway, underground, tunnel, floating and others), excavators with telescopic working equipment, as well as excavators with other working equipment, which, due to the nature of the work, must meet the standards and regulations of technical supervision organizations, excavators based on tractors, towing vehicles, automobiles and special vehicle chassis.
Стандарт распространяется на одноковшовые универсальные полноповоротные экскаваторы массой до 71 т, предназначенные в основном для разработки немерзлых грунтов категорий I-IV в соответствии с приложением А, а также предварительно разрыхленных скальных и мерзлых грунтов в диапазоне температур от минус 40 град. Цельсия до плюс 40 град. Цельсия (для других диапазонов температур экскаваторы изготавливают по специальным требованиям) и устанавливают требования к конструкции, а также к приемке и методам испытаний. Конкретные условия работы экскаваторов указывают в технических условиях на каждую модель. Стандарт не распространяется на экскаваторы специального назначения (железнодорожные, подземные, туннельные, плавучие и другие), экскаваторы с телескопическим рабочим оборудованием, а также на экскаваторы с прочим рабочим оборудованием, которые в связи с характером работы должны отвечать стандартам и предписаниям организаций технического надзора, на экскаваторы на базе тракторов, тягачей, автомобилей и спецшасси автомобильного типа.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of the Russian Federation for Standardization, Metrology and Certification,
4/11/1995
SKU: RUSS19421
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
53 Handling equipment »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.7 Machines and equipment for construction industry »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.100 Earthmoving Machines »
National standards »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.100 Earthmoving Machines »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G45 Machines and equipment for industry of building materials, construction, road and earthworks and public utilities »
National Standards for OKSTU »
CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS »
Single-bucket excavators »
As a Replacement Of:
GOST 12910-79: Single-bucket universal excavators. Methods of control tests
GOST 17343-83: Universal single-bucket excavators with flexible suspension of working attachment
GOST 22894-77: Universal single-bucket hydraulically driven excavators. Technical conditions
GOST 4.111-84: Product quality ratings system. Universal singles bucket excavators. Ratings nomenclature
The Document References:
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.026-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in a free-field over reflecting plane. Engineering method
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.011-75: Construction and road machines
GOST 12.4.026-76: Signal colors and safety signs
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17.2.2.01-84: Nature protection. Atmosphere. Automobile diesels. Exhaust smoke opacity. Rates and methods of measurement
GOST 17.2.2.05-97: Nature protection. Atmosphere. Rates and testing methods of harmful substances ejections with exhaust gases from diesel engines, tractors and agricultural machines
GOST 17257-87: Universal one-bucket excavators. Methods for determination of rated volume
GOST 2.601-95: Operational documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 20245-74: Hydraulic apparatuses
GOST 27251-87: Earth-moving machinery. Method of test for the measurement of tool movement time
GOST 27252-87: Earth-moving machinery. Preservation and storage
GOST 27253-87: Earth-moving machinery. Service instrumentation
GOST 27256-87: Earth-moving machinery. Methods of measuring the dimensions of whole machines with their equipment
GOST 27533-87: Earth-moving machinery. Dimensions of fuel filler opening
GOST 27534-87: Acoustics. Measurement of airborne noise emitted by earth-moving machinery. Operator's position. Stationary test condition
GOST 27717-88: Acoustics. Measurement of airborne noise emitted by earth-moving machinery. Method for determining compliance with limits for exterior noise. Stationary test condition
GOST 27921-88: Earth-moving machinery. Minimum access dimensions
GOST 27922-88: Earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components
GOST 27927-88: Earth-moving machinery. Determination of ground speed
GOST 28634-90: Earth-moving machinery. Operating instrumentation
GOST 28983-91: Earthing-caving machinery. Service tools. Part 1. Common maintenance and adjustment tools
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
The Document is Referenced By:
GOST 31546-2012: Pile driving rigs. General specifications
GOST R 51602-2000: Pile driving rigs. General specifications
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.